The role of coincidence-site-lattice boundaries in creep of Ni-16Cr-9Fe at 360 °C

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 28, Issue 10, 1997, Pages 2101-2112

  Thaveeprungsriporn, Visit ^a,b   Was, Gary S ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

^b CHULALONGKORN UNIVERSITY   (Thailand)

Author keywords

[No Author keywords available]

Indexed keywords

CREEP; CRYSTAL LATTICES; DISLOCATIONS (CRYSTALS); GRAIN BOUNDARIES; MATHEMATICAL MODELS; RESIDUAL STRESSES; STRAIN RATE; STRESS CONCENTRATION; TRANSMISSION ELECTRON MICROSCOPY;

COINCIDENCE SITE LATTICE BOUNDARY (CSLB); EXTRINSIC GRAIN BOUNDARY DISLOCATIONS (EGBD); HIGH ANGLE BOUNDARIES (HAB);

NICKEL ALLOYS;

EID: 0031259351     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-997-0167-6     Document Type: Article

References (55)

1. K. Norring and J. Engstrom: 1985 Workshop on Primary-Side Stress Corrosion Cracking of PWR Steam Generator Tubing, A.R. McIlree, ed., EPRI, Palo Alto, CA, Report No. NP-5158, 1987, paper no. 3.
2. A.K. Agrawal and G. Frieling: 1987 Workshop on Secondary-Side Intergranular Corrosion Mechanisms, EPRI, Palo Alto, CA, Report No. NP-4458, Mar. 1988.
3. G.P. Airey: 3rd Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, NACE, Houston, TX, 1984, pp. 462-78.
4. A.P. Sutton: Int. Met. Rev., 1984, vol. 29, pp. 377-402.
5. L.S. Shvindlerman and B.B. Straumal: Acta Metall., 1985, vol. 33, pp. 1735-49.
6. G. Palumbo, P.J. King, P.C. Lichtenberger, K.T. Aust, and U. Erb: Mater. Res. Soc. Symp. Proc., 1992, vol. 238, pp. 311-316.
7. K.T. Aust, U. Erb, and G. Palumbo: Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructure, NATO ASI Series, Kluwer, Hingham, MA, 1993, p. 107.
8. P.J. Goodhew: Met. Sci. J., 1979, vol. 13, pp. 108-17.
9. D. Bouchet and L. Priester: Scripta Metall., 1987, vol. 21, pp. 475-78.
10. L. Priester: Rev. Phys. Appl., 1989, vol. 21, pp. 419-38.
11. H. Kokawa, T. Watanabe, and S. Karashima: Phil. Mag. A, 1981, vol. 40, pp. 1239-54.
12. Don and S. Majumdar: Acta Metall., 1986, vol. 34, pp. 961-67.
13. T. Watanabe: J. Phys., 1988, vol. 5, pp. 507-19.
14. D.C. Crawford and G.S. Was: Metall. Trans. A, 1992, vol. 23A, pp. 1195-1206.
15. K.T. Aust, U. Erb, and G. Palumbo: Mater. Sci. Eng., 1994, vol. A176, pp. 329-34.
16. G.S. Was, J.K. Sung, and T.M. Angeliu: Metall. Trans., 1992, vol. 23A, pp. 3343-59.
17. G.S. Was, T.M. Angeliu, and J.K. Sung: Paper presented at the Alloy 600 Experts Meeting, Warrenton, VA, sponsored by the Electric Power Research Institute, Palo Alto, CA, Apr. 6-9, 1993.
18. T.M. Angeliu: Ph.D. Thesis, The University of Michigan, Ann Arbor, MI, 1993.
19. T. Watanabe, S.I. Kimura, and S. Karashima: Phil. Mag., 1984, vol. 49A, pp. 845-64.
20. K.J. Kurzydlowski, R.A. Varin, and W. Zielinski: Acta Metall., 1984, vol. 32, pp. 71-78.
21. A.H. King: Scripta Metall., 1985, vol. 19, pp. 1517-21.
22. L.C. Lim and R. Raj: Acta Metall., 1985, vol. 33, pp. 1577-83.
23. D.C. Crawford and G.S. Was: J. Electron Micro. Techn., 1991, vol. 19, pp. 345-60.
24. V. Thaveeprungsriporn, J.F. Mansfield, and G.S. Was: J. Mater. Res., 1994, vol. 9 (7), pp. 1887-94.
25. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479-84.
26. V. Thaveepningsriporn: Ph.D. Thesis, The University of Michigan, Ann Arbor, MI, 1996.
27. P. Hirsch, A. Howie, R.B. Nicholson, D.W. Pashley, and M.J. Whelan: Electron Microscopy of Thin Crystals, R.E. Krieger Publishing Co., Malabar, FL, 1977, p. 416.
28. V. Randle: Microtexture Determination and Its Applications, The Institute of Materials, London, 1992.
29. V. Randle: The Measurement of Grain Boundary Geometry, Institute of Physics Publishing, Bristol, 1993.
30. J. Cadek: Mater. Sci. Eng., 1987 vol. 94, pp. 79-92.
31. H. Kokawa, T. Watanabe, and S. Karashima: Phil. Mag. 4, 1981, vol. 44 (6), pp. 1239-54.
32. H. Kokawa, T. Watanabe, and S. Karashima: J. Mater. Sci., 1983, vol. 18, pp. 1183-94.
33. T. Johannesson and A. Thölén: Met. Sci. J., 1972, vol. 6, pp. 189-94.
34. P.R. Howell, J.O. Nilsson, and G.L. Dunlop: Phil. Mag. A, 1978, vol. 38 (1) pp. 39-47.
35. W.A.T. Clark and D.A. Smith: J. Mater. Sci., 1979, vol. 14, pp. 776-88.
36. R.C. Pond and D.A. Smith: Phil. Mag. A, 1977, vol. 36, pp. 353-66.
37. P.H. Pumphrey: Scripta Metall., 1975, vol. 9, pp. 151-77.
38. D.J. Dingley and R.C. Pond: Acta Metall., 1979, vol. 27, pp. 667-82.
39. W. Lojkowski: Acta Metall. Mater., 1991, vol. 39 (8), pp. 1891-99.
40. W. Blum: Phys. Status. Solid B, 1971, vol. 45, pp. 561-71.
41. J.W. Wyrzykowski and M.W. Grabski: Phil. Mag. A, 1986, vol. 53 (4), pp. 505-20.
42. J. Cadek: in Creep in Metallic Materials, Elsevier Science, New York, NY, 1988.
43. H. Mecking and K. Lucke: Scripta Metall., 1970, vol. 4, pp. 427-32.
44. R.A. Varin and K. Tangri: Scripta Metall., 1980, vol. 14, pp. 337-40.
45. N.L. Peterson: in Grain Boundary Structure and Kinetics, R.W. Balluffi, ed., ASM, Metals Park, OH, 1980, pp. 209-38.
46. S. Sangal and K. Tangri: Metall. Trans. A, 1989, vol. 20A, pp. 479-84.
47. H.J. Frost and M.F. Ashby: in Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982.
48. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: ASM Trans. Q., 1969, vol. 62, p. 155.
49. T.H. Alden: Acta Metall., 1969, vol. 17, p. 1435.
50. M.W. Grabski: J. Phys., 1988, vol. C5, pp. 497-506.
51. W.A. Swiatnicki and M.W. Grabski: Acta Metall., 1986, vol. 34, p. 817.
52. J.L. Hertzberg and G.S. Was: Scripta Metall. Mater., 1995, vol. 33, pp. 1193-99.
53. F.N. Rhines, K.R. Craig, and R.T. DeHoff: Metall. Trans., 1974, vol. 5, pp. 413-25.
54. L.E. Murr and S.H. Wang: Res Mech., 1982, vol. 4, pp. 237-74.
55. V. Thaveeprungsriporn, T.M. Angeliu, D.J. Paraventi, J.L. Hertzberg, and G.S. Was: 6th Int. Symp. on Environmental Degredation of Materials in Nuclear Power Systems-Water Reactors, San Diego, CA, Aug. 1993, TMS, Warrendale, PA, 1993, pp. 721-27.