메뉴 건너뛰기




Volumn 14, Issue 1, 2009, Pages

Curing effectiveness of resin composites at different exposure times using LED and halogen units

Author keywords

Depth of cure; Light curing; Light emitting diode; Microhardness; Resin composite; Tungsten halogen

Indexed keywords

HALOGEN; RESIN; SILICON DIOXIDE;

EID: 59949095804     PISSN: 16984447     EISSN: 16986946     Source Type: Journal    
DOI: None     Document Type: Article
Times cited : (49)

References (30)
  • 2
    • 17144404109 scopus 로고    scopus 로고
    • Thermal emission and curing efficiency of LED and halogen curing lights
    • Mar-Apr;
    • Vandewalle KS, Roberts HW, Tiba A, Charlton DG. Thermal emission and curing efficiency of LED and halogen curing lights. Oper Dent. 2005 Mar-Apr;30(2):257-64.
    • (2005) Oper Dent , vol.30 , Issue.2 , pp. 257-264
    • Vandewalle, K.S.1    Roberts, H.W.2    Tiba, A.3    Charlton, D.G.4
  • 3
    • 10044246124 scopus 로고    scopus 로고
    • Knoop hardness of ten resin composites irradiated with high-power LED and quartz-tungsten-halogen lights
    • May;
    • Price RB, Felix CA, Andreou P. Knoop hardness of ten resin composites irradiated with high-power LED and quartz-tungsten-halogen lights. Bio-materials. 2005 May;26(15):2631-41.
    • (2005) Bio-materials , vol.26 , Issue.15 , pp. 2631-2641
    • Price, R.B.1    Felix, C.A.2    Andreou, P.3
  • 4
    • 28444483289 scopus 로고    scopus 로고
    • Curing efficacy of a new generation high-power LED lamp
    • Nov-Dec;
    • Yap AU, Soh MS. Curing efficacy of a new generation high-power LED lamp. Oper Dent. 2005 Nov-Dec;30(6):758-63.
    • (2005) Oper Dent , vol.30 , Issue.6 , pp. 758-763
    • Yap, A.U.1    Soh, M.S.2
  • 5
    • 0036013938 scopus 로고    scopus 로고
    • High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties
    • Jul;
    • Mills RW, Uhl A, Blackwell GB, Jandt KD. High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties. Bioma-terials. 2002 Jul;23(14):2955-63.
    • (2002) Bioma-terials , vol.23 , Issue.14 , pp. 2955-2963
    • Mills, R.W.1    Uhl, A.2    Blackwell, G.B.3    Jandt, K.D.4
  • 7
    • 0036434889 scopus 로고    scopus 로고
    • Knoop hardness depth profiles and compressive strength of selected dental composites polymerized with halogen and LED light curing technologies
    • 7
    • 7.Uhl A, Mills RW, Vowles RW, Jandt KD. Knoop hardness depth profiles and compressive strength of selected dental composites polymerized with halogen and LED light curing technologies. J Biomed Mater Res. 2002;63(6):729-38.
    • (2002) J Biomed Mater Res , vol.63 , Issue.6 , pp. 729-738
    • Uhl, A.1    Mills, R.W.2    Vowles, R.W.3    Jandt, K.D.4
  • 8
    • 0033760568 scopus 로고    scopus 로고
    • Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs)
    • Jan;
    • Jandt KD, Mills RW, Blackwell GB, Ashworth SH. Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dent Mater. 2000 Jan;16(1):41-7.
    • (2000) Dent Mater , vol.16 , Issue.1 , pp. 41-47
    • Jandt, K.D.1    Mills, R.W.2    Blackwell, G.B.3    Ashworth, S.H.4
  • 9
    • 0346686362 scopus 로고    scopus 로고
    • The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies
    • Jan;
    • Uhl A, Michaelis C, Mills RW, Jandt KD. The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies. Dent Mater. 2004 Jan;20(1):21-8.
    • (2004) Dent Mater , vol.20 , Issue.1 , pp. 21-28
    • Uhl, A.1    Michaelis, C.2    Mills, R.W.3    Jandt, K.D.4
  • 10
    • 0034013693 scopus 로고    scopus 로고
    • Light-emitting diode (LED) polymerisation of dental composites: Flexural properties and polymerisation potential
    • Jul;
    • Stahl F, Ashworth SH, Jandt KD, Mills RW. Light-emitting diode (LED) polymerisation of dental composites: flexural properties and polymerisation potential. Biomaterials. 2000 Jul;21(13):1379-85.
    • (2000) Biomaterials , vol.21 , Issue.13 , pp. 1379-1385
    • Stahl, F.1    Ashworth, S.H.2    Jandt, K.D.3    Mills, R.W.4
  • 11
    • 38949174245 scopus 로고    scopus 로고
    • The potential of a resin-composite to be cured to a 4mm depth
    • Apr;
    • Fleming GJ, Awan M, Cooper PR, Sloan AJ. The potential of a resin-composite to be cured to a 4mm depth. Dent Mater. 2008 Apr;24(4):522-9.
    • (2008) Dent Mater , vol.24 , Issue.4 , pp. 522-529
    • Fleming, G.J.1    Awan, M.2    Cooper, P.R.3    Sloan, A.J.4
  • 12
    • 0036885728 scopus 로고    scopus 로고
    • Degree of polymerization of resin composites by different light sources
    • Dec;
    • Yoon TH, Lee YK, Lim BS, Kim CW. Degree of polymerization of resin composites by different light sources. J Oral Rehabil. 2002 Dec;29(12):1165-73.
    • (2002) J Oral Rehabil , vol.29 , Issue.12 , pp. 1165-1173
    • Yoon, T.H.1    Lee, Y.K.2    Lim, B.S.3    Kim, C.W.4
  • 13
    • 0029171939 scopus 로고
    • Influence of irradiation sequence on dentin bond of resin inlays
    • Jan-Feb;
    • Hinoura K, Akiyama Y, Miyazaki M, Kuroda T, Onose H. Influence of irradiation sequence on dentin bond of resin inlays. Oper Dent. 1995 Jan-Feb;20(1):30-3.
    • (1995) Oper Dent , vol.20 , Issue.1 , pp. 30-33
    • Hinoura, K.1    Akiyama, Y.2    Miyazaki, M.3    Kuroda, T.4    Onose, H.5
  • 14
    • 0031203673 scopus 로고    scopus 로고
    • Wear and marginal breakdown of composites with various degrees of cure
    • Aug;
    • Ferracane JL, Mitchem JC, Condon JR, Todd R. Wear and marginal breakdown of composites with various degrees of cure. J Dent Res. 1997 Aug;76(8):1508-16.
    • (1997) J Dent Res , vol.76 , Issue.8 , pp. 1508-1516
    • Ferracane, J.L.1    Mitchem, J.C.2    Condon, J.R.3    Todd, R.4
  • 15
    • 0035408188 scopus 로고    scopus 로고
    • Hardness evaluation of a dental composite polymerized with experimental LED-based devices
    • Jul;
    • Kurachi C, Tuboy AM, Magalhães DV, Bagnato VS. Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent Mater. 2001 Jul;17(4):309-15.
    • (2001) Dent Mater , vol.17 , Issue.4 , pp. 309-315
    • Kurachi, C.1    Tuboy, A.M.2    Magalhães, D.V.3    Bagnato, V.S.4
  • 16
    • 0036514426 scopus 로고    scopus 로고
    • A comparison of polymerization by light-emitting diode and halogen-based light-curing units
    • Mar;
    • Dunn WJ, Bush AC. A comparison of polymerization by light-emitting diode and halogen-based light-curing units. J Am Dent Assoc. 2002 Mar;133(3):335-41.
    • (2002) J Am Dent Assoc , vol.133 , Issue.3 , pp. 335-341
    • Dunn, W.J.1    Bush, A.C.2
  • 18
    • 0024023292 scopus 로고
    • Correlation of parameters used to estimate monomer conversion in a light-cured composite
    • Jun;
    • Rueggeberg FA, Craig RG. Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res. 1988 Jun;67(6):932-7.
    • (1988) J Dent Res , vol.67 , Issue.6 , pp. 932-937
    • Rueggeberg, F.A.1    Craig, R.G.2
  • 19
    • 28444486280 scopus 로고    scopus 로고
    • Effectiveness of composite cure associated with different light-curing regimes
    • Nov-Dec;
    • Neo BJ, Soh MS, Teo JW, Yap AU. Effectiveness of composite cure associated with different light-curing regimes. Oper Dent. 2005 Nov-Dec;30(6):671-5.
    • (2005) Oper Dent , vol.30 , Issue.6 , pp. 671-675
    • Neo, B.J.1    Soh, M.S.2    Teo, J.W.3    Yap, A.U.4
  • 20
    • 1342264216 scopus 로고    scopus 로고
    • Depth of cure and surface microhardness of composite resin cured with blue LED curing lights
    • May;
    • Tsai PC, Meyers IA, Walsh LJ. Depth of cure and surface microhardness of composite resin cured with blue LED curing lights. Dent Mater. 2004 May;20(4):364-9.
    • (2004) Dent Mater , vol.20 , Issue.4 , pp. 364-369
    • Tsai, P.C.1    Meyers, I.A.2    Walsh, L.J.3
  • 21
    • 0023297191 scopus 로고
    • A comparison of four modes of evaluating depth of cure of light-activated composites
    • Mar;
    • DeWald JP, Ferracane JL. A comparison of four modes of evaluating depth of cure of light-activated composites. J Dent Res. 1987 Mar;66(3):727-30.
    • (1987) J Dent Res , vol.66 , Issue.3 , pp. 727-730
    • DeWald, J.P.1    Ferracane, J.L.2
  • 22
    • 84985819525 scopus 로고
    • Restorative resins: Hardness and strength vs. quantity of remaining double bonds
    • Dec;
    • Asmussen E. Restorative resins: hardness and strength vs. quantity of remaining double bonds. Scand J Dent Res. 1982 Dec;90(6):484-9.
    • (1982) Scand J Dent Res , vol.90 , Issue.6 , pp. 484-489
    • Asmussen, E.1
  • 23
  • 24
    • 34548100632 scopus 로고    scopus 로고
    • Mechanical properties of light-curing composites polymerized with different laboratory photo-curing units
    • Mar;
    • Da Silva GR, Simamoto-Júnior PC, Da Mota AS, Soares CJ. Mechanical properties of light-curing composites polymerized with different laboratory photo-curing units. Dent Mater J. 2007 Mar;26(2):217-23.
    • (2007) Dent Mater J , vol.26 , Issue.2 , pp. 217-223
    • Da Silva, G.R.1    Simamoto-Júnior, P.C.2    Da Mota, A.S.3    Soares, C.J.4
  • 25
    • 0346686361 scopus 로고    scopus 로고
    • Second generation LEDs for the polymerization of oral biomaterials
    • Jan;
    • Uhl A, Sigusch BW, Jandt KD. Second generation LEDs for the polymerization of oral biomaterials. Dent Mater. 2004 Jan;20(1):80-7.
    • (2004) Dent Mater , vol.20 , Issue.1 , pp. 80-87
    • Uhl, A.1    Sigusch, B.W.2    Jandt, K.D.3
  • 26
    • 26444493556 scopus 로고    scopus 로고
    • The effect of composite type on microhardness when using quartz-tungsten-halogen (QTH) or LED lights
    • Sep-Oct;
    • Peris AR, Mitsui FH, Amaral CM, Ambrosano GM, Pimenta LA. The effect of composite type on microhardness when using quartz-tungsten-halogen (QTH) or LED lights. Oper Dent. 2005 Sep-Oct;30(5):649-54.
    • (2005) Oper Dent , vol.30 , Issue.5 , pp. 649-654
    • Peris, A.R.1    Mitsui, F.H.2    Amaral, C.M.3    Ambrosano, G.M.4    Pimenta, L.A.5
  • 27
    • 19344371591 scopus 로고    scopus 로고
    • Spectroscopic and mechanical properties of dental resin composites cured with different light sources
    • Jun;
    • Conti C, Giorgini E, Landi L, Putignano A, Tosi G. Spectroscopic and mechanical properties of dental resin composites cured with different light sources. J Mol Struct. 2005 Jun; 744-747(3): 641-646.
    • (2005) J Mol Struct , vol.744-747 , Issue.3 , pp. 641-646
    • Conti, C.1    Giorgini, E.2    Landi, L.3    Putignano, A.4    Tosi, G.5
  • 28
    • 0020020499 scopus 로고
    • Conversion in different depths of ultraviolet and visible light activated composite materials
    • Ruyter IE, Oysaed H. Conversion in different depths of ultraviolet and visible light activated composite materials. Acta Odontol Scand. 1982;40(3):179-92.
    • (1982) Acta Odontol Scand , vol.40 , Issue.3 , pp. 179-192
    • Ruyter, I.E.1    Oysaed, H.2
  • 29
    • 0028317218 scopus 로고
    • Effect of light intensity and exposure duration on cure of resin composite
    • Jan-Feb;
    • Rueggeberg FA, Caughman WF, Curtis JW Jr. Effect of light intensity and exposure duration on cure of resin composite. Oper Dent. 1994 Jan-Feb;19(1):26-32.
    • (1994) Oper Dent , vol.19 , Issue.1 , pp. 26-32
    • Rueggeberg, F.A.1    Caughman, W.F.2    Curtis Jr., J.W.3
  • 30
    • 0022020982 scopus 로고
    • Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins
    • Feb;
    • Ferracane JL. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dent Mater. 1985 Feb;1(1):11-4.
    • (1985) Dent Mater , vol.1 , Issue.1 , pp. 11-14
    • Ferracane, J.L.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.