A comprehensive investigation on the effects of laser and shot peening on fatigue crack growth in friction stir welded AA 2195 joints

International Journal of Fatigue

Volumn 31, Issue 5, 2009, Pages 974-988

  Hatamleh, Omar ^a  

^a NASA JOHNSON SPACE CENTER   (United States)

Author keywords

2195; Fatigue crack growth; Friction stir welding; Laser peening; Shot peening; Stress ratio

Indexed keywords

ALUMINA; CRACK DETECTION; CRACKING (CHEMICAL); FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; FRICTION; FRICTION STIR WELDING; FRICTION WELDING; GAS WELDING; GROWTH (MATERIALS); LASER BEAM WELDING; LASERS; RESIDUAL STRESSES; SHOT PEENING; STRENGTH OF MATERIALS; STRESS CONCENTRATION; SURFACE TREATMENT; TENSILE STRENGTH; TRIBOLOGY; WELDED STEEL STRUCTURES; WELDING; WELDS;

2195; CRACK GROWTH RATES; FATIGUE CRACK GROWTH; FATIGUE CRACK GROWTH RATES; FATIGUE LIVES; LASER PEENING; RESIDUAL STRESS DISTRIBUTIONS; STRESS RATIO; TENSILE RESIDUAL STRESS; TREATMENT TECHNIQUES; WELDED JOINTS; WELDING PROCESS;

CRACKS;

EID: 59849105311     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2008.03.029     Document Type: Article

References (67)

1. Li J., Chen W., Zhao X., Ren W., and Zheng Z. Corrosion behaviour of 2195 and 1420 Al-Li alloys in neutral 3.5% NaCl solution under tensile stress. Trans Nonferrous Met Soc China 16 (2006) 1171-1177
2. Pao P., Gill S., Feng C., and Sankaran K. Corrosion-fatigue crack growth in friction stir welded Al 7075. Scripta Mater 45 (2001) 605-612
3. Rhodes C., Mahoney M., Bingel W., Spurling R., and Bampton W. Effects of friction stir welding on microstructure of 7075 aluminum. Scripta Mater 36 1 (1997) 69-75
4. Thomas WM, Nicholas ED, Needham JC, Church MG, Templesmith P, Dawes CJ. International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.8, 1991.
5. Staron P., Kocak M., Williams S., and Wescott A. Residual stress in friction stir-welded A1 sheets. Phys B Condens Matter 350 1-3 (2004) e491-e493 [Suppl. 1]
6. Ericsson M., and Sandstrom R. Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG. Int J Fatigue 25 (2003) 1379-1387
7. Bussu G., and Irving P.E. The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminum joints. Int J Fatigue 25 (2003) 77-88
8. Ghidini T., and Dalle Donne C. Fatigue crack propagation assessment based on residual stresses obtained through cut-compliance technique. Fatigue Fract Eng Mater Struct (2006) 10
9. Mishra R.S., and Ma Z.Y. Friction stir welding and processing. Mater Sci Eng R 50 (2005) 1-78
10. Dale Donne C, Lima E, Wegener J, Pyzalla A, Buslaps T. Investigations on residual stresses in friction stir welds. In: Third international symposium on friction stir welding, Kobe, Japan; 2001.
11. Sutton MA, Yang B, Reynolds AP, Taylor R. Preliminary studies of mixed mode fracture in 2024-T3 friction stir welds. In: Best of Aeromat session, ASM materials solutions conference and exhibition, St. Louis, MO; 2000.
12. Yang J.M., Her Y.C., Han N., and Clauer A. Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes. Mater Sci and Eng A 298 (2001) 296-299
13. Hill M.R., DeWald A.T., Demma A.G., Hackel L.A., Chen H.-L., Specht R.C., et al. Laser peening technology. Adv Mater Process 161 8 (2003) 65-67
14. Tran K.N., Hill M.R., and Hackel L.A. Laser shock peening improves fatigue life of lightweight alloys. Weld J (Miami, Fla) 85 10 (2006) 28-31
15. Sano Yuji, Scholtes Berthold, Ochi Yasuo, Altenberger Igor, Masaki Kiyotaka, Akita Koichi. Enhancement of surface properties by laser peening without coating. In: Proceedings of 2006 ASME pressure vessels and piping division conference; 2006, 6p.
16. Hammersley G., Hackel L.A., and Harris F. Surface prestressing to improve fatigue strength of components by laser shot peening. Opt Laser Eng 34 4-6 (2000) 327-337
17. Tan Y., Wu G., Yang J.-M., and Pan T. Laser shock peening on fatigue crack growth behaviour of aluminium alloy. Fatigue Fract Eng Mater Struct 27 8 (2004) 649-656
18. Ochi Yasuo, Masaki Kiyotaka, Matsumura Takashi, Sano Yuji, Akita Koichi, Kajiwara Kentaro. Effects of laser peening on fatigue crack behaviors in pre-cracked cast aluminum alloy. Key engineering materials, vol. 345-346 I. In: The mechanical behavior of materials X Part 1: 10th International conference on the mechanical behaviour of materials; 2007, p. 255-8.
19. Rubio-Gonzalez C., Ocana J.L., Gomez-Rosas G., Molpeceres C., Paredes M., Banderas A., et al. Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy. Mater Sci Eng A 386 (2004) 291-295
20. Hatamleh O. The effects of laser peening and shot peening on mechanical properties in friction stir welded 7075-T7351 aluminum. J Mater Eng Perform (2007)
21. Hatamleh O., Lyons J., and Forman R. Laser and shot peening effects on fatigue crack growth in friction stir welded 7075-T7351 aluminum alloy joints. Int J Fatigue 29 3 (2007) 421-434
22. In: Gregory K., Rack H.J., and Eylon D. (Eds). Surface performance of titanium (1996), TMS, Warrendale, PA [p. 217-30]
23. DeWald A., Rankin J., Hill M., Lee M., and Chen H. Assessment of tensile residual stess mitigation in Alloy 22 welds due to laser peening. J Eng Mater Technol 126 (2004) 465-473
24. Montross C., Wei T., Ye L., Clark G., and Mai Y. Laser shock processing and its effects on microstructure and properties of metal alloys: a review. Int J Fatigue 24 (2002) 1021-1036
25. Peyre P., Fabbro R., Merrien P., and Lieurade H.P. Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour. Mater Sci Eng A 210 (1996) 102-113
26. Biallas G., Dalle Donne C., and Juricic C. Monotonic and cyclic strength of friction stir welded aluminium joints. In: Miannay D., Costa P., and Francois D. (Eds). Advances in mechanical behaviour plasticity and damage. Proceedings of EUROMAT2000 vol. 1 (2000), Elsevier, Amsterdam 115-120
27. Magnusson L, Kallman L. Mechanical properties of friction stir welds in thin sheet of aluminium 2024, 6013 and 7475. In: Second international symposium on FSW, Gothenburg, Sweden; June 2000.
28. Dickerson T.L. Fatigue of friction stir welds in aluminum alloys that contain root flaws. Int J Fatigue 25 (2003) 1399-1409
29. Okura I, Naruo M, Vigh LG, Hagisawa N, Toda H. Fatigue of aluminum deck fabricated by friction stir welding. In: Eighth international conference INALCO; 2001.
30. Banes M et al. Fatigue properties of as-welded AA6005 and AA6082 aluminum alloys in T1 and T5 temper condition. In: Trends in welding research. Proceedings of the fourth international conference, 5-8 June 1995, Gatlinburg, Tennessee.
31. Donne C et al. Fatigue and fracture performance of friction stir welded 2024-T3 joints. In: Proceedings European conference on spacecraft structures, materials and mechanical testing, Brauschweig, Germany, 4-6 November 1998.
32. Russel S et al. Static, fatigue and crack growth behavior of friction stir welded 7075-T6 and 2024-T3 aluminum alloys. Friction stir welding and processing. The minerals, Met and Mater Soc; 2001.
33. Donne C et al. Effect of weld imperfections and residual stresses on the fatigue crack propagation in friction stir welded joints. In: Second international conference on friction stir welding, 26-28 June 2000, Gothenburg, Sweden.
34. Tyson J, Schmidt T, Galanulis K Advanced photogrammetry for robust deformation and strain measurement. In: Proceedings of SEM 2002 annual conference, Milwaukee, WI, June 2002.
35. Schmidt T., Tyson J., and Galanulis K. Full-field dynamic displacement and strain measurement using advanced 3d image correlation photogrammetry. Exp Technol 27 3 (2003) 41-44
36. Ruud, Clay Olaf, Carpenter Davis F. Operators manual for the D-1000-A Stress Analyzer. Englewood: Denver X-Ray Instruments, Incorporated, 1985.
37. Hilley ME, editor, Larson JA, Jatczak CF, associated editors. Ricklefs RE, assistant editor. Residual stress measurement by X-ray diffraction SAE J784a. New York: Society of Automotive Engineers, Inc., 1971.
38. Hatamleh O., Rivero I.V., and Lyons J. Evaluation of surface residual stresses in friction stir welds due to laser and shot peening. J Mater Eng Perform 16 5 (2007) 549-553
39. Prime M, Sebring RJ, Edwards JM, Baumann JA, Lederich RJ. Contour-method determination of parent-part residual stresses using a partially relaxed fsw test specimen. In: Proceedings of the 2004 SEM X international congress and exposition on experimental and applied mechanics, June 7-10, 2004, Costa Mesa, CA.
40. Prime M, Hill MR, DeWald AT, Sebring RJ, Dave VR, Cola MJ. Residual stress mapping in welds using the contour method, trends in welding research. In: David SA et al., editors. Proceedings of the sixth international conference, 15-19 April 2002. Pine Mountain, GA: ASM International; 2003, p. 891-6.
41. Prime M. Cross-sectional mapping of residual stresses by measuring the surface contour after a cut. J Eng Mater Technol 123 (2001) 162-168
42. Prime M, Gonzales AR. The contour method: simple 2-D mapping of residual stresses. In: Proceedings of the sixth international conference on residual stresses, Oxford, UK, vol. 1, July10-12, 2000, p. 617-24.
43. Peel M., Steuwer A., Preuss M., and Withers P.J. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Mater 51 16 (2003) 4791-4801
44. Svenson L., Karlsson L., Larsson H., Karlsson B., Fazzini M., and Karlsson J. Sci Tech Weld 5 5 (2000) 285-296
45. Subramanian P, Nirmalan N, Young L, Sudcamp P, Mika D, Larsen M, Othon M, Dupree P, Walker S, Catlin G. AFRL Final Technical Report No. AFRL-SR-AR-TR-03-0423, Arlington, VA, 2003.
46. Li Z, Arbegast J, Hartley P, Meletis, E. In: Proceedings of the fifth international conference on trends in welding research, ASM International, Materials Park, OH, 1999, p. 568-73.
47. Oertelt G., Babu S., David S., and Kenik E. Weld J 80 (2001) 71-79
48. Kumar K., Brown S., and Pickens J. Microstructure evolution during aging of an Al-Cu-Li-Ag-Mg-Zr Alloy. Acta Mater 44 5 (1996) 1899-1915
49. Niskanen P., Sanders T., and Kinker J. Corrosion of aluminum alloys containing lithium. Corros Sci 22 4 (1982) 283-304
50. Fonda R., and Bingert J. Precipitation and grain refinement in a 2195 Al friction stir weld. Metal Mater Trans A 37A (2006) 3593-3604
51. Kroninger H., and Reynolds A. R-Curve behaviour of friction stir welds in aluminum-lithium Alloy 2195. Fatigue Fract Eng Mater Struct 25 (2002) 283-290
52. James M.N., and Bradley G.R. Weld tool travel speed effects on fatigue life of friction stir welds in 5083 Aluminium. Int J Fatigue 25 (2003) 1389-1398
53. Milan M, Tarpani J, Bose Filho W. Residual stress evaluation of AA 2024-T3 friction stir welded joints. In: 18th international congress of mechanical engineering, November 6-11, 2005, Ouro Preto, MG.
54. Rushau J., et al. Fatigue crack nucleation and growth rate behavior of laser shock peened titanium. Int J Fatigue 21 (1999) S199-S209
55. Cavaliere P., and De Marco P.P. Fatigue behaviour of friction stir processed AZ91 magnesium alloy produced by high pressure die casting. Mater Charact 58 (2007) 226-232
56. Prime M.B., Gnaupel-Herold T., Baumann J.A., Lederich R.J., Bowden D.M., and Sebring R.J. Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weld. Acta Mater 54 (2006) 4013-4021
57. Hou C.Y., and Lawrence V.F. Crack closure in weldments. Fatigue Fract Eng Mater Struct 19 6 (1996) 683-693
58. James M.N., Hughes D.J., Hattingh D.G., Bradley G.R., Mills G., and Webster P.J. Synchrotron diffraction measurement of residual stresses in friction stir welded 5383-H321 aluminium butt joints and their modification by fatigue cycling. Fatigue Fract Eng Mater Struct 27 (2004) 187-202
59. Cavaliere P. Effect of friction stir processing on the fatigue properties of a Zr-modified 2014 aluminum alloy. Mater Charact 57 2 (2006) 100-104
60. Fratini L., et al. An analysis of trough-thickness residual stresses in aluminum FSW butt joints. Int J Machine Tools Manuf (2005) 1-9
61. Tang W., Reynolds A.P., Gnaupel-Herold T., and Prask H. Structure, properties, and residual stress of 304L stainless steel friction stir welds. Scripta Mater 48 9 (2003) 1289-1294
62. Ge Y.Z., Sutton M.A., Deng X., and Reynolds A.P. Limited weld residual stress measurements in fatigue crack propagation: Part I. Complete field representation through least-squares finite-element smoothing. Fatigue Fract Eng Mater Struct 29 7 (2006) 524-536
63. Hill M. Determination of Residual Stress Based on the Estimation of Eigenstrain. Ph.D. dissertation. Stanford University. 1996.
64. Elber W. Fatigue crack closure under cyclic tension. Eng Fract Mech 2 (1970) 37-45
65. Rodrigues Elenice M., Matias A., Godefroid Leonardo B., Bastian Fernando L., and Al-Rubaie Kassim S. Fatigue crack growth resistance and crack closure behavior in two aluminum alloys for aeronautical applications. Mater Res 8 3 (2005) 287-291
66. Masona J.J., and Ritchie R.O. Fatigue crack growth resistance in SiC particulate and whisker reinforced P:M 2124 aluminum matrix composites. Mater Sci Eng A 231 (1997) 170-182
67. Hertzberg R. Deformation and fracture mechanics of engineering materials. 4th ed. (1996), Wiley, New York