High-density YSZ tapes fabricated via the multi-folding lamination process

Ceramics International

Volumn 35, Issue 3, 2009, Pages 1219-1226

  Capdevila, X G ^a   Folch, J ^b   Calleja, A ^a   Llorens, J ^a   Segarra, M ^a   Espiell, F ^a   Morante, J R ^b  

^a UNIVERSITY OF BARCELONA   (Spain)

^b Labarotori de Nanobioenginyeria CREBEC   (Spain)

Author keywords

A: Sintering; A: Tape casting; E: Fuel Cells; YSZ

Indexed keywords

CERAMIC MATERIALS; ELECTROCHEMISTRY; FUEL CELLS; LAMINATING; SOLID STATE DEVICES; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

A: SINTERING; A: TAPE CASTING; AVERAGE PARTICLE SIZES; CERAMIC PROCESSING; DENSITY VALUES; E: FUEL CELLS; GREEN BODIES; HIGH DENSITIES; HIGH TEMPERATURES; LAMINATION PROCESS; RHEOLOGICAL STUDIES; SINTERED PARTS; SLIP CASTINGS; THEORETICAL DENSITIES; YSZ; YTTRIA-STABILIZED ZIRCONIAS;

SINTERING;

EID: 59549090951     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2008.06.018     Document Type: Article

References (30)

1. U. Adler, Electronic Gasoline Fuel-Injection System with Lambda Closed-Loop Control, L-Jetronic: Technical Instruction, Robert Bosch GmbH, 1985, ISBN 1-85-226008-4. http://www.digest.net/alfa/archive/v8/msg01828.html (August, 2002).
2. Riegel J., Neumann H., and Wiedenmann H.-M. Exhaust gas sensors for automotive emission control. Solid State Ionics 152-153 (2002) 783-800
3. Docquier N., and Candel S. Combustion control and sensors: a review. Prog. Energy Combust. Sci. 28 (2002) 107-150
4. Saji K., Kondo H., Takeuchi T., and Igarashi I. Voltage step characteristics of oxygen concentration cell sensors for nonequilibrium gas mixtures. J. Electrochem. Soc. 135 7 (1988) 1686-1691
5. Ramanarayanan T.A., Singhal S.C., and Wachsman E.D. High temperature ion conducting ceramics, interface. J. Electrochem. Soc. (2001)
6. Mistler R.E., and Twiname E. Tape Casting: Theory and Practice (2000), The American Ceramic Society, Westerville, OH, USA
7. Roosen A., and Bowen H.K. Influence of various consolidation techniques on the green microstructure and sintering behavior of alumina powders. J. Am. Ceram. Soc. 71 11 (1988) 970-977
8. Maiti A.K., and Rajender B. Terpineol as a dispersant for tape casting yttria stabilized zirconia powder. Mater. Sci. Eng. A 333 (2002) 35-40
9. Gibson I.R., Dransfeld G.P., and Irvine J.T.S. Influence of yttria concentration upon electrical properties and susceptibility to ageing of yttria-stabilised zirconias. J. Eur. Ceram. Soc. 18 (1998) 661-667
10. Nowotny J., Rekas M., and Bak T. Defect chemistry and defect-dependent properties of undoped and stabilised zirconia. bulk vs interface. In: Kisi E. (Ed). Zirconia Engineering Ceramics (1998), Trans Tech Publications Ltd., Switzerland p. 223
11. Lewis J.A. Colloidal processing of ceramics. J. Am. Ceram. Soc. 83 10 (2000) 2341-2359
12. Liu D.-M. Adsorption, rheology, packing, and sintering of nanosize ceramic powders. Ceram. Int. 25 (1999) 107-113
13. Mukherjee A., Maiti B., Das Sharma A., Basu R.N., and Maiti H.S. Correlation between slurry rheology, green density and sintered density of tape cast yttria stabilised zirconia. Ceram. Int. 27 (2001) 731-739
14. 2 powders on fabrication of anode-supported solid oxide fuel cells. J. Power Sources 117 (2003) 26-34
15. Ciacchi F.T., Crane K.M., and Badwal S.P.S. Evaluation of commercial zirconia powders for solid oxide fuel cells. Solid State Ionics 73 (1994) 49-61
16. Gibson I.R., Dransfeld G.P., and Irvine J.T.S. Sinterability of commercial 8 mol% yttria-stabilized zirconia powders and the effect of sintered density on the ionic conductivity. J. Mater. Sci. 33 17 (1998) 4297-4305
17. He T., Lu Z., Huang Y., Guan P., Liu J., and Su W. Characterization of YSZ electrolyte membrane tubes prepared by a vacuum casting method. J. Alloys Compd. 337 (2002) 23-236
18. Du Y., Sammes N.M., and Tompsett G.A. Optimisation parameters for the extrusion of thin YSZ tubes for SOFC electrolytes. J. Eur. Ceram. Soc. 20 (2000) 959-965
19. Roosen A. Low-temperature/low-pressure lamination of green ceramic tapes. Adv. Eng. Mater. 2 6 (2000) 374-376
20. Shi J.L. Relation between coarsening and densification in solid-state sintering of ceramics: experimental test on superfine zirconia powder compacts. J. Mater. Res. 14 4 (1999) 1389-1397
21. 2 ceramics: sintering and grain growth behaviors. Acta Mater. 52 (2004) 2221-2228
22. Salam L.A., Matthews R.D., and Robertson H. Pyrolisis of polyvinyl butyral (PVB) binder in thermoelectric green tapes. J. Eur. Ceram. Soc. 20 (2000) 1375-1383
23. Menzler N.H., Lavergnat D., Tietz F., Sominski E., Djurado E., Fischer W., Pang G., Gedanken A., and Buchkremer H.P. Materials synthesis and characterization of 8YSZ nanomaterials for the fabrication of electrolyte membranes in solid oxide fuel cells. Ceram. Int. 29 (2003) 619-628
24. Lewis J.A., Blackman K.A., and Ogden A.L. Rheological property and stress development during drying of tape-cast ceramic layers. J. Am. Ceram. Soc. 79 12 (1996) 3225-3234
25. 3 particles and poly(vinyl butyral). Mater. Res. Bull. 38 (2003) 1021-1032
26. Wen T.L., Wang D., Chen M., Tu H., Lu Z., Zhang Z., Nie H., and Huang W. Material research for planar SOFC stack. Solid State Ionics 148 (2002) 513-519
27. Sung J.-S., Koo K.-D., and Park J.-H. Lamination and sintering shrinkage behavior in multilayered ceramics. J. Am. Ceram. Soc. 82 3 (1999) 537-544
28. Trunec M., Dobšák P., and Cihlář J. Effect of powder treatment on injection moulded zirconia ceramics. J. Eur. Ceram. Soc. 20 (2000) 859-866
29. In: Rahaman M.N. (Ed). Ceramic Processing and Sintering (1995), Marcel Dekker Inc., New York
30. Sibakumar S., Subbanna S., Sahay S.S., Ramakrishnan V., Kapur P.C., Pradip, and Malghan S.G. Population balance model for solid state sintering. II. Grain growth. Ceram. Int. 27 (2001) 63-71