Effect of particle size distribution on isothermal oxidation characteristics of plasma sprayed CoNi- and CoCrAlY coatings

Proceedings of the International Thermal Spray Conference

Volumn , Issue , 2007, Pages 954-966

  Seo, Dowon ^a   Ogawa, Kazuhiro ^a   Shoji, Tetsuo ^a   Murata, Shozo ^b  

^a TOHOKU UNIVERSITY   (Japan)

^b Murata Boring Technology Research Co Ltd   (Japan)

Author keywords

CoNiCrAlY; Isothermal oxidation; Particle size distribution; Vacuum plasma spray

Indexed keywords

COATINGS; DEGRADATION; FRICTION; OXIDATION; OXYGEN; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; PESTICIDES; PLASMA DIAGNOSTICS; PLASMA JETS; PLASMAS; POWDER COATINGS; PROTECTIVE COATINGS; SCALE (DEPOSITS); SIZE DETERMINATION; SIZE DISTRIBUTION; SPRAYED COATINGS; SURFACE PROPERTIES; SURFACE ROUGHNESS; VACUUM;

AVERAGE PARTICLE SIZES; COATING SURFACES; CONICRALY; DEGRADATION BEHAVIORS; DEPOSITION PROCESS; ISOTHERMAL OXIDATION; LARGE PARTICLES; LOW POROSITIES; OXIDE GROWTHS; OXIDE SCALE FORMATIONS; OXYGEN CONTENTS; PARTICLE SIZE DISTRIBUTION; PLASMA SPRAYED; SMALL PARTICLES; SMOOTH SURFACES; THERMAL EXPOSURES; VACUUM PLASMA SPRAY;

PLASMA SPRAYING;

EID: 59349083216     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (35)

1. P.S. Sidky and M.G. Hocking, Review of Inorganic Coatings and Coating Processes for Reducing Wear and Corrosion, Brit. Corros. J., 1999, 34, p. 171-183
2. F. Tang, L. Ajdelsztajn, G.E. Kim, V. Provenzano, and J.M. Schoenung, Effects of Surface Oxidation During HVOF Processing on the Primary Stage Oxidation of a CoNiCr A1Y Coating, Surf. Coat. Technol., 2004, 185, p. 228-233
3. P. K, Wright and A.G. Evans, Mechanisms Governing the Performance of Thermal Barrier Coatings, Curr. Opin. Solid State Mat. Sci., 1999, 4(3), p. 255-265
4. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit, Mechanisms Controlling the Durability of Thermal Barrier Coatings, Prog. Mater. Sci., 2001, 46(5), p. 505-553
5. 3 Scales on Ferritic Fe-Cr-Al Alloys, Mater. Sci. Eng. A, 1998, 247(1-2), p. 248-262
6. C.J. Li and W.Y. Li, Effect of Sprayed Powder Particle Size on the Oxidation Behavior of MCrAlY Materials During High Velocity Oxygen-fuel Deposition, Surf. Coat. Technol., 2002, 162(1), p. 31-41
7. H.B. Xiong, L.L. Zheng, L. Li, and A. Vaidya, Melting and Oxidation Behavior of In-flight Particles in Plasma Spray Process, Int. J. Heat Mass Transf., 2005, 48, p. 5121-5133
8. C.J. Li and Y.Y. Wang, Effect of Particle State on the Adhesive Strength of HVOF Sprayed Metallic Coating, J. Thermal Spray Technol., 2002, 11(4), p. 523-529
9. M.J. Pomeroy, Coatings for Gas Turbine Materials and Long Term Stability Issues, Mater. Des., 2005, 26, p. 223-231
10. K. Shimotor and T. Aisaka, The Trend of MCrAlX Alloys for High-Temperature-Protective Coatings, Tetsu To Hagane-J. Iron Steel Inst. Jpn., 1983, 69(10), p. 1229-1241, in Japanese
11. R. Anton, J. Birkner, N. Czech, and W. Stamm, Degradation of Advanced MCrAlY Coatings by Oxidation and Interdiffusion, Mater. Sci. Forum, 2001, 369-372, p. 719-726
12. K. Ogawa, K. Ito, T. Shoji, D.W. Seo, H. Tezuka, and H. Kato, Effects of Ce and Si Additions to CoNiCrAlY Bond Coat Materials on Oxidation Behavior and Crack Propagation of Thermal Barrier Coatings, J. Thermal Spray Technol., 2006, 15(4), p. 640-651
13. J.A. Haynes, M.K. Ferber, W.D. Porter, and E.D. Rigney, Characterization of Alumina Scales Formed During Isothermal and Cyclic Oxidation of Plasma-Sprayed TBC Systems at 1150 °C, Oxid. Met., 1999, 52(1/2), p. 31-76
14. J.R. Nicholls, N.J. Simms. W.Y. Chan, and H.E. Evans, Smart Overlay Coatings-Concept and Practice, Surf. Coat. Technol., 2002, 149, p. 236-244
15. N. Czech, M. Juez-Lorenzo, V. Kolarik, and W. Stamm, Influence of the Surface Roughness on the Oxide Scale Formation on MCrAlY Coatings Studied In Situ by High Temperature X-ray Diffraction, Surf. Coat. Tech., 1998, 108(1-3), p. 36-42
16. M.P. Taylor and H.E. Evans, The Influence of Bond Coat Surface Roughness and Structure on the Oxidation of a Thermal Barrier Coating System, Mater. Sci. Forum, 2001, 369(3), p. 711-717
17. U. Bardi, L. Carrafiello, R. Groppetti, F. Niccolai, G. Rizzi, A. Scrivani, and F. Tedeschi, On the Surface Preparation of Nickel Superalloys before CoNiCrAlY Deposition by Thermal Spray, Surf. Coat. Tech., 2004, 184(2-3), p. 156-162
18. E. Lugscheider, C. Herbst, and L. Zhao, Parameter Studies on High-velocity Oxy-fuel Spraying of MCrAlY Coatings, Surf. Coat. Technol., 1998, 108-109, p. 16-23
19. S. Sampath, X.Y. Jiang, J. Matejicek, L. Prchlik, A. Kulkarni, and A. Vaidya, Role of Thermal Spray Processing Method on the Microstructure, Residual Stress and Properties of Coatings: An Integrated Study for Ni-5 wt.%Al Bond Coats, Mater. Sci. Eng. A, 2004, 364(1-2), p. 216-231
20. A. Kulkarni, A. Vaidya, A. Goland, S. Sampath, and H. Herman, Processing Effects on Porosity-Property Correlations in Plasma Sprayed Yttria-Stabilized Zirconia Coatings, Mater. Sci. Eng. A, 2003, 359(1/2), p. 100-111
21. G. Espie, P. Fauchais, B. Hannoyer, J.C. Labbe, and A. Vardelle, Effect of Metal Particles Oxidation During the APS on the Wettability, Ann.NY Acad.Sci., 1999, 891, p. 143-151
22. G. Espie, A. Denoirjean, P. Fauchais, J.C. Labbe, J. Dubsky, O. Schneeweiss, and K. Volenik, In-Flight Oxidation of Iron Particles Sprayed Using Gas and Water Stabilized Plasma Torch, Surf. Coat. Technol., 2005, 195, p. 17-28
23. G. Espie, P. Fauchais, J.C. Labbe, A. Vardelle, and B. Hannoyer, Oxidation of Iron Particles During APS: Effect of the Process on Formed Oxide Wetting of Droplets on Ceramics Substrates, Thermal Spray 2001: New Surfaces for a New Millennium., C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed., May 28-30, 2001 (Singapore), ASM International, 2001, p. 821-827
24. O.P. Solonenko, M.A. Anatolyevich, K.E. Vladimirovich, B.M. Petrovna, K. Ogawa, T. Shoji, and M. Tanno, Theoretical Modeling and Experimental Studv of Thermal Barrier Coatings, Mater. Trans., 2003, 44(11), p. 2311-2321
25. K. Dobler, H. Kreye, and R. Schwetzke, Oxidation of Stainless Steel in the High Velocity Oxy-Fuel Process, J. Therm. Spray Technol., 2000, 9(3), p. 407-413
26. T. Fukushima and S. Kuroda, Oxidation of HVOF Sprayed Alloy Coatings and Its Control by a Gas Shroud, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed., May 28-30, 2001 (Singapore), ASM International, 2001, p. 527-532
27. V. Gourlaouen, E. Verna, and P. Beaubien, Influence of Flame Parameters on Stainless Steel Coatings Properties, Thermal Spray: Surface Engineering Via Applied Research, C.C. Berndt, Ed., May 8-11, 2000 (Montréal, Québec, Canada), ASM International, 2000, p. 487-493
28. V. Gourlaouen, E. Verna, K. Khor, and P.S.T. Guek, Role of Some Fuel Gases on Properties of HVOF Metallic Coatings, Thermal Spray 2001: New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, Ed., May 28-30, 2001 (Singapore), ASM International, 2001, p. 519-525
29. R.A. Neiser, M.F. Smith, and R.C. Dykhuizen, Oxidation in Wire HVOF-Sprayed Steel, J. Therm. Spray Technol., 1998, 7(4), p. 537-545
30. D. Seo, K. Ogawa, M. Tanno. T. Shoji, and S. Murata, Influence of Heat Exposure Time on Isothermal Degradation of Plasma Sprayed CoNiCrAlY Coatings, Surf. Coat. Technol., 2007, 201(18), p. 7952-7960
31. J.A. Thompson and T.W. Clyne, The Effect of Heat Treatment on the Stiffness of Zirconia Top Coats in Plasma-Sprayed TBCs, Acta Mater., 2001, 49(9), p. 1565-1575
32. H.H. Zhu, J.Y.H. Fuh, and L. Lu, The Influence of Powder Apparent Density on the Density in Direct Laser-Sintered Metallic Parts, Int. J. Much. Tool Manuf., 2007, 47(2), p. 294-298
33. V.K. Tolpygo and D.R. Clarke, Surface Rumpling of a (Ni, Pt)Al Bond Coat Induced by Cyclic Oxidation, Acta Mater., 2000, 48, p. 3283-3293
34. H.M. Tawancy, N. Sridhar, N.M. Abbas, and D.S. Rickerby, Comparative Performance of Selective Bond Coats in Advanced Thermal Barrier Coating Systems, J. Mater. Sci., 2000, 35, p. 3615-3629
35. H.S. Choi, B. Yoon, H.J. Kim, and C.H. Lee, Isothermal Oxidation of Air Plasma Spray NiCrAlY Bond Coatings, Surf. Coat. Tech., 2002, 150(2-3), p. 297-308