Corrosion rate of steel embedded in blended Portland and fluid catalytic cracking catalyst residue (FC3R) cement mortars;Estudio de la velocidad de corrosión de aceros embebidos en morteros de cemento sustituidos con residuo de catalizador de craqueo catalítico (FC3R)

Materiales de Construccion

Volumn 58, Issue 292, 2008, Pages 27-43

  Zornoza, E ^a   Garces P ^b   Paya J ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b UNIVERSITY OF ALICANTE   (Spain)

Author keywords

Carbonation; Catalyst; Cement; Corrosion; Steel

Indexed keywords

ACCELERATED CARBONATION; CEMENT MORTARS; CORROSION LEVELS; FLUID CATALYTIC CRACKING CATALYST; POLARIZATION RESISTANCES; REINFORCEMENT CORROSION; SPENT FLUID CATALYTIC CRACKING CATALYSTS; WATER/BINDER RATIOS;

CARBON DIOXIDE; CARBONATION; CATALYSTS; CEMENTS; CORROSION; CORROSION RATE; CRACKS; ELECTROCHEMICAL CORROSION; MORTAR; PORTLAND CEMENT; STEEL;

FLUID CATALYTIC CRACKING;

EID: 59249109493     PISSN: 04652746     EISSN: None     Source Type: Journal    
DOI: 10.3989/mc.2008.39006     Document Type: Article

References (35)

1. Baccay, M. A., Otsuki, N., Nishida, T., Maruyama, S.: "Influence of cement type and temperature on the rate of corrosion of steel in concrete exposed to carbonation". Corrosion 62 (2006) 811-821.
2. Pal, S. C., Mukherjee, A. S. R.: Pathak. "Corrosion behavior of reinforcement in slag concrete". ACI Materials Journal 99 (2002) 521-527.
3. Parrot, L. J.: "Some effects of cement and curing upon carbonation and reinforcement corrosion in concrete". Materials and Structures 29 (1996) 164-173. http://dx.doi.org/10.1007/BF02486162
4. Parrot. L. J. "A study of carbonation-induced corrosion". Magazine of Concrete Research 46 (1994) 23-28.
5. Batis, G., Pantazopoulou, P., Tsivilis, S., Gadogiannis, E.: "The effect of metakaolin on the corrosion behaviour of cement mortars". Cement & Concrete Composites 27 (2005) 125-130. http://dx.doi.org/10. 1016/jxemconcomp.2004.02.041
6. Jiang, L. H., Liu, Z. Q., Ye, Y. Q.: "Durability of concrete incorporating large volumes of low-quality fly ash". Cem. Concr. Res. 34 (2004) 1467-1469. http://dx.doi.org/10.1016/jxemconres.2003.12.029
7. Montemor, M. F., Cunha, M. P., Ferreira, M. G., Simoes, A. M.: "Corrosion behaviour of rebars in fly ash mortar exposed to carbon dioxide and chlorides". Cement & Concrete Composites 24 (2002) 45-53. http://dx.doi.org/10.1016/S0958-9465(01)00025-7
8. Payá, J., Monzó, J., Borrachero, M. V., Velázquez, S.: "Evaluation of the pozzolanic activity of fluid catalytic cracking residue (FCC). Thermogravimetric analysis studies on FCC-Portland cement pastes". Cem. Concr. Res. 33 (2003) 603-609. http://dx.doi.org/10. 1016/S0008-8846(02)01026-8
9. Payá, J., Monzó, J., Borrachero, M. V., Velázquez, S., Bonilla, M.: "Determination of the pozzolanic activity of fluid catalytic cracking residue. Thermogravimetric analysis studies on FC3R-llme pastes". Cem. Concr. Res. 33 (2003) 1085-1091. http://dx.doi.org/10. 1016/S0008-8846(03)00014-0
10. Payá, J., Monzó, J., Borrachero, M. V.: "Fluid catalytic cracking catalyst residue (FC3R). An excellent mineral by-product for improving early-strength development of cement mixtures". Cem. Concr. Res. 29 (1999) 1773-1779.http://dx.doi.org/10.1016/S0008-8846(99)00164-7
11. Payá, J., Monzó, J., Borrachero, M. V., Amahjour, F., Girbés, I., Velázquez, S., Ordónez, L. M.: "Advantages in the use of fly ashes in cements containing pozzolanic combustion residues: silica fume, sewage sludge ash, spent fluidized bed catalyst and rice husk ash". Journal of Chemical Technology and Biotechnology 77 (2002) 331-335. http://dx.doi.org/10.1002/jctb.583
12. Su, N., Fang, H.-Y., Chen, Z.-H. Liu, F.-S.: "Reuse of waste catalyst from petrochemical industries for cement substitution". Cem. Concr. Res. 30 (2000) 1773-1783. http://dx.doi.org/10.1016/S0008-8846(00) 00401-4
13. Alcocel, E. G., Garces, P., Martinez, J. J., Payá, J., Andión, L. G.: "Effect of sewage sludge ash (SSA) on the mechanical performance and corrosion levels of reinforced Portland cement mortars". Mater. Construcc. 56, no 282, pp. 31-43 (2006).
14. Blanco-Varela, M. T., Martínez-Ramírez, S., Gener, M., et al.: "Modifications induced by adding natural zeolitic pozzolans to cement paste". Mater. Construcc. 55, no 280, pp. 27-42 (2005).
15. Chen, H.-L., Tseng, Y.-S., Hsu, K.-C.: "Spent FCC catalyst as a pozzolanic material for high-performance mortars". Cement & Concrete Composites 26 (2004) 657-664. http://dx.doi.org/10.1016/S0958-9465(03) 00048-9
16. Wu, J.-H., Wu, W.-L., Hsu, K.-C.: "The effect of waste oil-cracking catalyst on the compressive strength of cement pastes and mortars". Cem. Concr. Res. 33 (2003) 245-253. http://dx.doi.org/10.1016/S0008-8846(02) 01006-2
17. Wu, W.-L., Wu, J.-H., Hsu, K.-C., Yen, D.-S.: "Subproducto del fraccionamiento catalítico del petróleo: características, actividad puzolánica y su efecto en las propiedades del mortero". Cemento Hormigón 850 (2003) 18-25.
18. Hsu, K.-C., Tseng, Y.-S., Ku, F.-F., Su, N.: "Oil cracking waste catalyst as an active pozzolanic material for superplasticized mortars". Cem. Concr. Res. 31 (2001) 1815-1820. http://dx.doi.org/10.1016/S0008- 8846(01)00693-7
19. Pacewska, B., Wilinska, I., Bukowska, M., Nocun-Wczelik, W.: "Effect of waste aluminosilicate material on cement hydration and properties of cement mortars". Cem. Concr. Res. 32 (2002) 1823-1830. http://dx.doi.org/ 10.1016/S0008-8846(02)00873-6
20. Pacewska, B., Bukowska, M., Wilinska, I., Swat, M.: "Modification of the properties of concrete by a new pozzolan. A waste catalyst from the catalytic process in a fluidized bed". Cem. Concr. Res. 32 (2002) 145-152. http://dx.doi.org/10.1016/S0008-8846(01)00646-9
21. Stern, M., Geary, A. L.: "A therical analysis of the shape of polarization curves". Journal of Electrochemical Society 104 (1957) 56. http://dx.doi.org/10.1149/1.2428473
22. Miranda, J. M., Otero, E., Gonzalez, J. A., et al.: "Behaviour of corroded steel in a Ca(OH)(2)-saturated solution and in cement mortar. Possibility of rehabilitation". Mater. Construcc. 57, no 285, pp. 5-16 (2007).
23. Andrade, C., González, J. A.: "Quantitavie measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements". Werkst. Korros. 29 (1978) 515. http://dx.doi.org/10.1002/maco.19780290804
24. Anzola, E., Malave, R., Contreras, A., et al.: "Effect of steel surface conditions on reinforcing steel corrosion in concrete exposed to marine environments". Mater. Construcc. 55, no 279, pp. 17-24 (2005).
25. Ahmed, S. F. U., Maalej, M., Paramasivam, P., Mihashi, H.: "Assessment of corrosion-induced damage and its effect of the structural behaviour of RC beams containing supplementary cementitious materials". Progress in Structural Engineering and Materials 8 (2006) 69-77. http://dx.doi.org/10.1002/pse.214
26. Hou, J., Chung, D. D. L.: "Effect of admixtures in concrete on the corrosion resistance of steel reinforced concrete". Corrosion Science 42 (2000) 1489-1507. http://dx.doi.org/10.1016/S0010-938X(99)00134-1
27. Dotto, J. M. R., de Abreu, A. G., Dal Molin, D. C. C., Müller., I. L.: "Influence of silica fume addition on concretes physical properties and on corrosion behaviour of reinforcement bars". Cement & Concrete Composites 26 (2004) 31-39. http://dx.doi.org/10.1016/S0958-9465(02)00120-8
28. Dinakar, P., Babu, K. G., Santhanam., M.: "Corrosion behaviour of blended cements in low and medium strength concretes". Cement & Concrete Composites 29 (2007) 136-145. http://dx.doi.org/10.1016/ jxemconcomp.2006.10.005
29. Güneyisi, E., Özturan, T., Gesoglu, M.: "A study on reinforcement corrosion and related properties of plain and blended cement concretes under different curing conditions". Cement & Concrete Composites 27 (2005) 449-461. http://dx.doi.org/10.1016/jxemconcomp.2004.05. 006
30. Yeau, K. Y., Kim, E. K.: "An experimental study on corrosion resistance of concrete with ground granulate blast-furnace slag". Cem. Concr. Res. 35 (2005) 1391-1399. http://dx.doi.org/10.1016/jxemconres.2004. 11.010
31. Gu, P., Beaudoin, J. J.: "Obtaining effective half-cell potential measurements in reinforced concrete structures". Construction Technology Updates No. 18. Ed. National Research Council of Canada, Ottawa, 1998.
32. Zornoza, E., Garcés, P., Monzó, J., Borrachero, M. V., Payá, J.: "Compatibility of fluid catalytic cracking catalyst residue (FC3R) with various types of cement". Advances in Cement Research 19:3 (2007) 117-124. http://dx.doi.org/10.1680/adcr.2007.193.117
33. Arandigoyen, M., Álvarez, J. I.: "Pore structure and carbonation in blended lime-cement pastes". Mater. Construcc. 56, no 282, pp. 17-30 (2006).
34. Arandigoyen, M., Álvarez, J. I.: "Carbonation process in lime pastes with different water/binder ratio". Mater. Construcc. 56, no 281, pp. 5-18 (2006).
35. Norma Americana ASTM C876. "Standard test method for half-cell potentials of uncoated reinforcing steel in concrete".