An experimental study on corrosion resistance of concrete with ground granulate blast-furnace slag

Cement and Concrete Research

Volumn 35, Issue 7, 2005, Pages 1391-1399

  Yeau, Kyong Yun ^a   Kim, Eun Kyum ^b  

^a Yonsei University   (South Korea)

^b Seoul National University of Science and Technology   (South Korea)

Author keywords

ASTM Type I and ASTM Type V cement; Corrosion resistance; Ground granulate blast furnace slag

Indexed keywords

BLAST FURNACES; CARBONATION; CORROSION RESISTANCE; FLY ASH; GRANULATION; REINFORCEMENT; SILICA; SLAGS;

ASTM TYPE 1 AND ASTM TYPE V CEMENT; GROUND GRANULATE BLAST-FURNACE SLAG; INGRESS; STEEL BARS;

CONCRETES;

EID: 19744377393     PISSN: 00088846     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconres.2004.11.010     Document Type: Article

References (25)

1. A.A. Ramezanianpour Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporation slag, fly ash or silica fume Cem. Concr. Compos. 17 1995 125 133
2. G.J. Osborne Durability of portland blast-furnace slag cement concrete Cem. Concr. Compos. 21 1999 11 21
3. E.F. Irassar, M. Gonzalez, and V. Rahhal Sulphate resistance of type V cements with limestone filler and natural pozzolana Cem. Concr. Compos. 22 2000 361 368
4. K.M.A. Hossain, and M. Lachemi Corrosion resistance and chloride diffusivity of volcanic ash blended cement mortar Cem. Concr. Res. 34 4 2004 695 702
5. O.E. GjΦrv Effect of condensed silica fume on steel corrosion in concrete ACI Mater. J. 92-M60 1995 591 598
6. K. Torii, T. Sasatani, and M. Kawamura Effects of fly ash, blast furnace slag, and silica fume on resistance of mortar to calcium chloride attack Proceedings of fifth International Conference on Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete American Concrete Institute, SP-153 vol. 2 1995 931 949
7. T.M. El Sokkary, H.H. Assal, and A.M. Kandeel Effect of silica fume or granulated slag on sulphate attack of ordinary portland and alumina cement blend Ceram. Int. 30 2004 133 138
8. A.K. Suryavanshi, J.D. Scantlebury, and S.B. Lyon The binding of chloride ions by sulphate resistant portland cement Cem. Concr. Res. 25 3 1995 581 592
9. S.E. Hussain, Rasheeduzzafar, A. Al-Musallam, and A.S. Al-Gahtani Factors affecting threshold chloride for reinforcement corrosion in concrete Cem. Concr. Res. 25 7 1995 1543 1555
10. X. Rasheeduzzafar, S.S. Al-Saadoun, A.S. Al-Gahtani, and F.H. Dakhil Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete Cem. Concr. Res. 20 1990 723 738
11. A.K. Suryavanshi, J.D. Scantlebury, and S.B. Lyon Corrosion of reinforcement steel embedded in high water-cement ratio concrete contaminated with chloride Cem. Concr. Compos. 20 1998 263 381
12. H.A.F. Dehwah, M. Maslehuddin, and S.A. Austin Long-term effect of sulfate ions and associated cation type on chloride-induced reinforcement corrosion in Portland cement concretes Cem. Concr. Compos. 24 2002 17 25
13. ASTM C 494 Standard specification for chemical admixtures for concrete Annual Book of ASTM Standards, American Society for Testing and Materials 1999
14. ASTM C 1202 Standard test method for electrical indication of concrete's ability to resist chloride ion penetration Annual Book of ASTM Standards, American Society for Testing and Materials 1997
15. P.F. McGrath, and R.D. Hooton Influence of voltage on chloride diffusion coefficients from chloride migration tests Cem. Concr. Res. 26 8 1996 1239 1244
16. R.K. Dhir, M.R. Jones, H.E. Ahmed, and A.M. Seneveratune Rapid estimation of chloride diffusion coefficient in concrete Mag. Concr. Res. 42 152 1990 177 185
17. T. Sugiyama, S. Nagaoka, Y. Tsuji, and C. Hashimoto Electrical potential technique for determination of chloride diffusion coefficient of concrete Proc. Jpn. Concr. Inst. 18 1 1996 981 986
18. G.C. Kostogloudis, D. Kalogridis, C. Ftikos, C. Malami, B. Georgali, and V. Kaloidas Comparative investigation of corrosion resistance of steel reinforcement in alinite and portland cement mortars Cem. Concr. Res. 28 7 1998 995 1010
19. ASTM C 876 Standard test method for half-cell potentials of uncoated reinforcing steel in concrete Annual Book of ASTM Standards, American Society for Testing and Materials 1991
20. S.E. Hussain, Mechanisms of high durability performance plane and blended cements, PhD Dissertation, Department Civil Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, 1991.
21. A. Kumar, and Della M. Roy The effect of desiccation on the porosity and pore structure of freeze dried hardened portland cement and slag-blended pastes Cem. Concr. Res. 16 1986 74 78
22. Rasheeduzzafar, S. Ehtesham Hussain, and S.S. Al-Saadoun Effect of tricalcium aluminate content of cement on chloride binding and corrosion of reinforcing steel in concrete ACI Mater. J. 89 1 1999 3 12
23. A.K. Suryavanshi, J.D. Scantlebury, and S.B. Lyon The binding of chloride ions by sulphate resistant Portland cement Cem. Concr. Res. 25 3 1995 581 592
24. D.E. Macphee, and H.T. Cao Theoretical description of impact of blast furnace slag (BFS) on steel passivation in concrete Mag. Concr. Res. 45 162 1993 63 69
25. O.S.B. Al-Amouid, Rasheeduzzafar, M. Maslehuddin, and S.N. Abduljauwad Influence of sulfate ions on chloride-induced reinforcement corrosion in Portland and blended cement concrete Cem. Concr. Aggreg. 16 1 1994 3 11