Experimental and numerical study on the drying Process of natural rubber latex films

Drying Technology

Volumn 27, Issue 1, 2009, Pages 59-70

  Bouyer, D ^a   Philippe, K ^a   Wisunthorn, S ^a   Pochat Bohatier, C ^a   Dupuy, C ^a  

^a UNIV MONTPELLIER   (France)

Author keywords

Drying kinetics; Formulation; Latex

Indexed keywords

DEWATERING; FILM PREPARATION; LATEXES; RUBBER; SYNTHETIC RUBBER;

CHEMICAL COMPOSITIONS; DRY FILMS; DRYING KINETICS; EVAPORATION FLUX; FILM FORMATIONS; FILM TRANSFER; FORMULATION; LATEX; NATURAL RUBBER (NR); PARTICLE SIZE DISTRIBUTION (PSZ); WATER VOLUME FRACTION;

RUBBER FILMS;

EID: 58449107120     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930802565830     Document Type: Article

References (36)

1. Blackley, D. C. (1997) Polymer Lattices Science and Technology. Vol 1: Fundamental Principles, Chapman & Hall, London
2. D'Auzac, J. and Jacob, J. L. (1989) Physiology of Rubber Tree Latex, pp. 59-88. CRC Press, Boca Raton, FL
3. Bousquet, J., Flahault, A., Vandenplas, O., Ameille, J., Duron, J.-J., Pecquet, C., Chevrie, K. and Annesi-Maesano, I. (2006) Natural rubber latex allergy among health care workers: A systematic review of the evidence. Journal of Allergy and Clinical Immunology, 118:2, pp. 447-454.
4. Kolarich, D., Altmann, F. and Sunderasan, E. (2006) Structural analysis of the glycoprotein allergen Hev b 4 from natural rubber latex by mass spectrometry. Biochimica et Biophysica Acta, 1760, pp. 715-720.
5. Vanderhoff, J. W., Bradford, E. B. and Carrington, W. K. (1973) Transport of water through latex films. Journal of Polymer Science: Polymer Symposium, 41, pp. 155-174.
6. Croll, S. G. (1986) Drying of latex paint. Journal of Coatings Technology, 58:734, pp. 41-49.
7. Eckersley, S. T. and Rudin, A. (1990) Mechanism of film formation from polymer latexes. Journal of Coating Technology, 62, pp. 89-100.
8. Takase, K., Miura, H., Tamon, H. and Okazaki, M. (1994) Structure formation of coated films with dispersed pigments during drying. Drying Technology, 12:6, pp. 1279-1296.
9. Etemad, S., Etemasi, N., Bagheri, R. and Thibault, J. (2002) Drying of latexfilms of poly (vinyl acetate). Drying Technology, 20:9, pp. 1843-1854.
10. Croll, S. G. (1987) Heat and mass transfer in latex paints during drying. Journal of Coating Technology, 59, pp. 81-92.
11. Lee, M. T. and Maa, J. R. (1992) Effects of extended thin film evaporation during the constant drying period. Drying Technology, 10:1, pp. 81-99.
12. Lee, M. T. and Maa, J. R. (1992) On the interline evaporating region of a wetting thin film. Drying Technology, 10:1, pp. 101-122.
13. Lee, M. T. and Maa, J. R. (1992) Effects of extended thin film evaporation and external diffusion resistance during the constant drying rate period. Drying Technology, 10:2, pp. 395-419.
14. Alsoy, S. and Duda, J. L. (1998) Drying of solvent coated polymer films. Drying Technology, 16:1, pp. 15-44.
15. Routh, A. F. and Russel, W. B. (1998) Horizontal drying fronts during solvent evaporation from latex films. AIChE Journal, 44, pp. 2088-2099.
16. Kiil, S. (2006) Drying of latex films and coatings: Reconsidering the fundamental mechanisms. Progress in Organic Coating, 57, pp. 236-250.
17. Gutoff, E. B. (2001) The drying of coatings on thick webs. Drying Technology, 19:9, pp. 2261-2276.
18. Gutoff, E. B. and Cohen, E. D. (1996) R&D needs in the drying of coatings. Drying Technology, 14:6, pp. 1315-1328.
19. Ho, C. C. and Khew, M. C. (1999) Surface morphology of prevulcanized natural rubber latex films by atomic force microscopy: New insight into the prevulcanization mechanism. Langmuir, 15:19, pp. 6208-6219.
20. Ho, C. C. and Khew, M. C. (2000) Low glass transition temperature (Tg) rubber latex film formation studied by atomic force microscopy. Langmuir, 16:6, pp. 2436-2449.
21. Rippel, M. M., Lay-Theng, L., Leite, C. and Galembeck, F. (2003) Skim and cream natural rubber particles: Colloidal properties, coalescence and film formation. Journal of Colloid and Interface Science, 268, pp. 330-340.
22. Brown, G. L. (1956) Formation of films from polymer dispersions. Journal of Polymer Science, 22, pp. 423-434.
23. Sheetz, D. P. (1965) Formation of films by drying of latex. Journal of Applied Polymer Science, 9, pp. 3759-3773.
24. Vanderhoff, J. W., Tarkowski, H. L., Jenkins, M. C. and Bradford, E. B. (1966) Theoretical consideration of the interfacial forces involved in the coalescence of latex particles. Journal of Macromolecular Chemistry, 1:2, pp. 361-397.
25. Dobler, F. and Holl, Y. (1996) Mechanisms of latex film formation. TRIP, 4:5, pp. 145-151.
26. Winnik, M. A. (1997) Latex film formation. Current Opinion in Colloid and Interface Science, 2:2, pp. 192-199.
27. Steward, P. A., Hearn, J. and Wilkinson, M. C. (2000) An overview of polymer latex film formation and properties. Advances in Colloid Interface Science, 86, pp. 195-267.
28. Keddie, J. L. (1997) Film formation of latex. Material Science and Engineering, pp. 101-170.
29. Perez, E. and Lang, J. (1999) Flattening of latex film surface: Theory and experiments by atomic force microscopy. Macromolecules, 32, pp. 1626-1636.
30. Poehlein, G. W., Vanderhoff, J. W. and Witmeyer, R. (1975) Drying of latex films. Journal of Polymer Preprints, 16, pp. 268-273.
31. Dillon, R. E., Matheson, L. A. and Bradford, E. B. (1951) Sintering of synthetic latex particles. Journal of Colloid Science, 6, pp. 108-117.
32. Blanc, D., Laurent, P., Andrieu, J. and Gerard, J. F. (1997) Convective and radiant (IR) curing of bulk and waterborne epoxy coatings as thin layers. Part I: Methodology. Polymer Engineering and Science, 37:12, pp. 1959-1969.
33. Blanc, D., Laurent, P. and Andrieu, J. (1998) pp. 181-186.
34. Eckersley, S. T. and Rudin, A. (1994) Drying behaviour of acrylic latexes. Progress in Organic Coatings, 23, pp. 387-402.
35. Steward, P. A., Hearn, J., Wilkinson, M. C., Wilson, A. J. and Roulstone, B. J. (1996) ACS (Division of Polymeric Materials, Science and Engineering), pp. 359-402.
36. Dobler, F., Pith, T., Lambla, Y., Holl, Y. and Coll, J. (1992) Synthesis of model lattices for the study of coalescence mechanics. Journal of Applied Polymer Science, 44:6, pp. 1075-1086.