Cold gas dynamic spraying of iron-base amorphous alloy

Proceedings of the International Thermal Spray Conference

Volumn , Issue , 2006, Pages 495-500

  Ajdelsztajn, L ^a   Jodoin, B ^b   Richer, P ^b   Sansoucy, E ^a   Lavernia, E J ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b UNIVERSITY OF OTTAWA   (Canada)

Author keywords

Amorphous coatings; Cold gas dynamic spraying; Nanostructured coatings; Nanostructured materials

Indexed keywords

AMORPHOUS ALLOYS; AMORPHOUS SILICON; CERIUM ALLOYS; CHROMATE COATINGS; CHROMIUM; COATINGS; DEFORMATION; GAS DYNAMICS; GASES; MANGANESE; MANGANESE COMPOUNDS; METALLIC COMPOUNDS; MICROCRYSTALLINE SILICON; MOLYBDENUM; NANOSTRUCTURED MATERIALS; PESTICIDES; POWDER COATINGS; POWDERS; THERMAL SPRAYING; ZIRCONIUM;

AMORPHOUS COATINGS; COLD GAS DYNAMIC SPRAYING; FEEDSTOCK POWDERS; LOCALIZED DEFORMATIONS; NANOSTRUCTURED COATINGS; PARTICLE DIAMETERS; POWDER PARTICLES; SPLAT FORMATIONS; SYNTHESIS OF;

AMORPHOUS MATERIALS;

EID: 58349095373     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1361/105996306X146857     Document Type: Conference Paper

References (34)

1. C. Li and W. Li, Impact Fusion Phenomenon During Cold Spraying of Zinc, Thermal Spray 2004: Advances in Technology and Application, May 10-12, 2004 (Osaka, Japan), ASM International, 2004, 1129 pages
2. C. Borchers, F. Gärtner, T. Stoltenhoff, H. Assadi, and H. Kreye, Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings, J. Appl. Phys., 2003, 93, p. 10064-10070
3. R. Morgan, P. Fox, R. Morgan, P. Fox, J. Pattison, C. Sutcliffe, and W. O'Neill, Analysis of Cold Gas Dynamically Sprayed Aluminum Deposits, Mater. Lett., 2004, 58, p. 1317-1320
4. C.-J. Li and W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167(2-3), p. 278-283
5. T.H. Van Steenkiste, J.R. Smith, and R.E. Teets, Aluminum Coatings via Kinetic Spray with Relatively Large Powder Particles, Surf. Coat. Technol., 2002, 154(2-3), p. 237-252
6. R.S. Lima, J. Karthikeyan, CM. Kay, J. Lindemann, and C.C. Berndt, Microstructural Characteristics of Cold-Sprayed Nanostructured WC-Co Coatings, Thin Solid Films, 2002, 416(1-2), p. 129-135
7. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, and S. Sampath, Impact of High Velocity Cold Spray Particles, J. Thermal Spray Technol., 1999, 8(4), p. 559-564
8. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p. 4379-4394
9. A.P. Alkhimov, A.I. Gudilov, V.F. Kosarev, and N.I. Nesterovich, Specific Features of Microparticle Deformation upon Impact on a Rigid Barrier, J. Appl. Mech. Tech. Phys., 2000, 41, p. 188-192
10. M. Grujicic, J.R. Saylor, M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, and D. Helfritch, Computational Analysis of the Interfacial Bonding Between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process, Appl. Surf. Sci., 2003, 219(3-4) p. 211-227
11. T. Schmidt, F. Gärtner, T. Schmidt, F. Gärtner, H. Assadi, T. Stoltenhoff, and H. Kreye, High Velocity Impact Phenomena and Coating Quality in Cold Spraying, Thermal Spray 2005, May 2-4, 2005 (Basel, Switzerland), ASM International, 2005, p. 232-238
12. L. Ajdelsztajn, B. Jodoin, G.E. Kim, J. Schoenung, L. Ajdelsztajn, B. Jodoin, G.E. Kim, and J.M. Schoenung, Cold Spray Deposition of Nanocrystalline Aluminum Alloys, Met. Mater. Trans. A, 2005, 36, p. 657-666
13. P. Richer, B. Jodoin, and L. Ajdelsztajn, Characteristics of Cold Sprayed Coatings Using Nano-Aluminum and Nano-Nickel Powders, 16th Canadian Materials Science Conference (Ottawa, Ontario, Canada), June 2004
14. E. Sansoucy, B. Jodoin, and L. Ajdelsztajn, Conventional and Nano-Structured Nickel Coatings Produced by Cold Spray Processing, 16th Canadian Materials Science Conference (Ottawa, Ontario, Canada), June 2004
15. L. Ajdelsztajn, B. Jodoin, and J. Schoenung, Synthesis and Mechanical Properties of Nanocrystalline Ni Coatings Produced by Cold Gas Dynamic Spray, Surf. Coat. Technol., 2006, 201(3-4), p. 1166-1172
16. L. Ajdelsztajn, A. Zuniga, B. Jodoin and E. Lavernia, Cold Gas Dynamic Spraying of a High Temperature Al Alloy, Surf. Coat. Technol., in press. Corrected proof, Available online 19 July 2005
17. Z.P. Lu, C.T. Liu, J.R. Thompson, and W.D. Porter, Structural Amorphous Steels, Phys. Rev. Lett., 2004, 92, p. 245503
18. S.J. Pang, T. Zhang, K. Asami, and A. Inoue, Synthesis of Fe-Cr-Mo-C-B-P Bulk Metallic Glasses with High Corrosion Resistance, Acta Mater., 2002, 50, p. 489-497
19. W.L. Johnson, Bulk Amorphous Metal-An Emerging Engineering Material, JOM, 2002, 54(3), p. 40-43
20. D.J. Branagan, W.D. Swank, D.C. Haggard, and J.R. Fincke, Wear-Resistant Amorphous and Nanocomposite Steel Coatings, Met. Mater. Trans., 2001, 32A, p. 2615-2621
21. A.V. Sergueeva, N.A. Mara, J.D. Kuntz, D.J. Branagan, and A.K. Mukherjee, Shear Band Formation and Ductility of Metallic Glasses, Mater. Sci. Eng. A, 2004, 383(2), p. 219-223
22. W.L. Johnson, Fundamental Aspects of Bulk Metallic Glass Formation in Multicomponent Alloys, Mater. Sci. Forum, 1996, 35, p. 225-227
23. R. Busch, Y.J. Kim, and W.L. John, Thermodynamics and Kinetics of the Undercooled Liquid and the Glass-Transition cf the Zr41.2Ti13.8Cu12.5Ni10.0Be22. 5 Alloy, J. Appl. Phys., 1995, 77, p. 4039-4043
24. A. Peker and W.L. Johnson, A Highly Processable Metallic-Glass-Zr41. 2Ti13.8Cu12.5Ni10.0Be22.5, Appl. Phys. Lett., 1993, 63, p. 2342-2344
25. A. Inoue, Thermal Properties of Zr-TM-B and Zr-TM-Ga(TM = Co, Ni, Cu) Amorphous Alloys with Wide Range of Supercooling, Mater. Trans. JIM, 1995, 36, p. 1411-1419
26. A. Inoue, T. Zhang, and T. Masumoto, Aluminum-Base Amoiphous Powders with Flaky Morphology Prepared by a 2-Stage Quenching Technique, Mater. Trans. JIM, 1989, 30, p. 1033-1043
27. K. Kishitake, H. Era, and P. Li, Nonequilibrium Phases In Rapidly Solidified High-Carbon Fe-Cr-Mo Alloys, Mater. Trans. JIM, 1993, 34, p. 54-61
28. A. Inoue, T. Masumoto, S. Arakawa, and T. Iwadachi, Amoiphous High-Carbon Alloy-Steels Rapidly Quenched from Melts, Trans. JIM, 1978, 19, p. 303-304
29. H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, The Effect of Tungsten on the Corrosion Behavior of Amorphous Fe-Cr-W-P-C Alloys in 1m HC1, J. Electrochem. Soc., 1991, 138, p. 76-81
30. K. Kobayashi, K. Hashimoto, and T. Masumoto, Spontaneously Passivating Amorphous Fe-Cr-Mo-Metalloid Alloys in 6 NHC1 at Xoom-Temperature and 80-Degrees-C, Sci. Rep. Res. Inst. Tohoku Univ. [Med], 1981, A29, p. 284-295
31. H. Habazaki, A. Kawashima, K. Asami, and K. Hashimoto, The Corrosion Behavior of Amorphous Fe-Cr-Mo-P-C and Fe-Cr-W-P-C Alloys in 6-M HC1 Solution, Corros. Sci., 1992, 33, p. 225-236
32. X. Li and B. Bhushan, A Review of Nanoindentation Continuous Stiffness Measurement Technique and Its Applications, Mater. Charact., 2002, 48, p. 11-36
33. A. Mitra; H.-Y. Kim, D.V. Louzguine, N. Nishiyama, B. Shen, and A. Inoue, Magnetic Properties of Melt-Spun and Annealed Fe62Co9.5Gd3.5Si10B15 Alloy, J. Phys. D, Appl. Phys., 2003, 36(18), p. 2234-2238
34. B. Jodoin, F. Raletz, and M. Vardelle, Cold Spray Modeling and Validation Using an Optical Diagnostic Method, Surf. Coat. Technol., 2006, 200, p. 4424-4432