Laminar flow in radial flow cell with small aspect ratios: Numerical and experimental study

Chemical Engineering Science

Volumn 64, Issue 1, 2009, Pages 31-42

  Detry, J G ^a   Deroanne, C ^a   Sindic, M ^a   Jensen, B B B ^b  

^a UNIVERSITY OF LIÈGE   (Belgium)

^b TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

Computation; Fluid mechanics; Hydrodynamics; Radial flow chamber; Stagnation point flow chamber; Visualisation

Indexed keywords

ASPECT RATIO; COMPUTATIONAL FLUID DYNAMICS; CONTACTS (FLUID MECHANICS); DYNAMICS; FLOW PATTERNS; FLUID DYNAMICS; FLUID MECHANICS; HYDRODYNAMICS; LAMINAR FLOW; MECHANICS; NUMERICAL ANALYSIS; PRESSURE DROP; RADIAL FLOW; REYNOLDS NUMBER; SHEAR STRESS; SOILS; STRENGTH OF MATERIALS; STRESS CONCENTRATION; STRESSES; VISUALIZATION;

ANALYTICAL MODELS; AXISYMMETRICAL FLOWS; COMPLEX FLOWS; COMPUTATION; CREEPING FLOWS; CRITICAL RADIUSES; DYE INJECTIONS; EXPERIMENTAL DATUMS; EXPERIMENTAL INVESTIGATIONS; INLET PIPES; LAMINAR REGIMES; NUMERICAL AND EXPERIMENTAL STUDIES; NUMERICAL PREDICTIONS; RADIAL FLOW CHAMBER; RECIRCULATION ZONES; SMALL ASPECT RATIOS; SOIL REMOVALS; STAGNATION POINT FLOW CHAMBER; VISUALISATION; WALL SHEAR STRESSES;

EXPERIMENTS;

EID: 58149147327     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ces.2008.09.008     Document Type: Article

References (43)

1. Armaly B.F., Durst F., Pereira J.C.F., and Schönung B. Experimental and theoretical investigation of backward-facing step flow. Journal of Fluid Mechanics 127 (1983) 473-496
2. Bakker D.P., Busscher H.J., and van der Mei H.C. Bacterial deposition in a parallel plate and stagnation point flow chamber. Microbiology 148 (2002) 597-603
3. Bakker D.P., Huijs F.M., Klijnstra J.W., Busscher H.J., and van der Mei H.C. Bacterial deposition to fluoridated and non-fluoridated polyurethane coatings with different elastic modulus and surface tension in a parallel plate and a stagnation point flow chamber. Collloids and Surfaces B: Biointerfaces 32 (2003) 179-190
4. Blel W., Bénézech T., Legentilhomme P., Legrand J., and Le Gentil-Lelièvre C. Effect of flow arrangement on the removal of Bacillus spores from stainless steel equipment surfaces during a cleaning in place procedure. Chemical Engineering Science 62 (2007) 3798-3808
5. Boonaert C.J.P., Dufrêne Y., and Rouxhet P.G. Adhesion (primary) of microorganisms onto surfaces. In: Bitton G. (Ed). Encyclopedia Environmental Microbiology (2002), Wiley, New York 113-132
6. Boulangé-Petermann L., Debacq C., Poiret P., and Cromières B. Effect of the physical chemistry of polymeric coating surfaces on fouling and cleanability with particular reference to the food industry. In: Mittal K.L. (Ed). Contact Angle, Wettability and Adhesion vol. 3 (2003), VPS 501-519
7. Boulangé-Petermann L., Gabet C., and Baroux B. On the respective effect of the surface energy and micro-geometry in cleaning ability of bare and coated steels. Colloids and Surfaces A: Physicochemical and Engineering Aspects 272 (2006) 56-62
8. Brooks S.B., and Tozeren A. Flow past an array of cells that are adherent to the bottom plate of a flow channel. Computers & Fluids 25 (1996) 741-757
9. In: Casey M., and Wintergerste T. (Eds). Best Practice Guidelines, ERCOFTAC Special Interest Group on Quality and Trust in Industrial CFD (2000), ERCOFTAC, Brussels
10. Changani S.D., Belmar-Beiny M.T., and Fryer P.J. Engineering and chemical factors associated with fouling and cleaning in milk processing. Experimental Thermal and Fluid Science 14 (1997) 392-406
11. Chatterjee A. Newtonian radial entrance flow. A.I.Ch.E. Journal 46 (2000) 462-475
12. Cozens-Roberts C., Quinn J.A., and Lauffenburger A. Receptor-mediated adhesion phenomena. Model studies with the radial flow detachment assay. Biophysical Journal 58 (1990) 107-125
13. Décavé, E., 2002. Comportement cellulaire sous écoulement hydrodynamique: aspects expérimentaux et théoriques. Ph.D. Thesis, Université Joseph Fourier, Grenoble, France.
14. Demilly M., Bréchet Y., Bruckert F., and Boulangé L. Kinetics of yeast detachment from controlled stainless steel surfaces. Colloids and Surfaces B: Biointerfaces 51 (2006) 71-79
15. Detry J.G., Rouxhet P.G., Boulangé-Petermann L., Deroanne C., and Sindic M. Cleanability assessment of model solid surfaces with a radial-flow cell. Colloids and Surfaces A: Physicochemical and Engineering Aspects 302 (2007) 540-548
16. Dufrêne Y.F., Boonaert C.J.P., and Rouxhet P.G. Adhesion of Azospirillum brasilense: role of proteins at the cell-support interface. Colloids and Surfaces B: Biointerfaces 7 (1996) 113-118
17. FLUENT 6.2 User's Guide Electronic Version, Fluent Inc., 2005.
18. Fowler H.W., and McKay A.J. The measurement of microbial adhesion. In: Berkeley R.C.W., Lynch J.M., Melling J., Rutter P.R., and Vincent B. (Eds). Microbial Adhesion to Surfaces (1980), Ellis Horwood Ltd., Chichester 141-163
19. Fryer P.J., Slater N.K.H., and Duddridge J.E. Suggestions for the operation of radial flow cells in cell adhesion and biofouling studies. Biotechnology and Bioengineering 27 (1985) 434-438
20. Goldstein A.S., and DiMilla P.A. Application of fluid mechanic and kinetic models to characterize mammalian cell detachment in a radial-flow chamber. Biotechnology and Bioengineering 55 (1997) 616-629
21. Goldstein A.S., and DiMilla P.A. Comparison of converging and diverging radial flow for measuring cell adhesion. A.I.Ch.E. Journal 44 (1998) 465-473
22. Hsieh J.C., and Lin T.F. Effects of jet-to-disk separation distance on the characteristics of mixed convective vortex flow in an impinging air jet confined in a cylindrical chamber. International Journal of Heat and Mass Transfer 48 (2005) 511-525
23. Hsieh J.C., Cheng T.C., and Lin T.F. Characteristics of vortex flow in a low speed air jet impinging onto a heated disk in a vertical cylindrical chamber. International Journal of Heat and Mass Transfer 46 (2003) 4639-4656
24. Hsieh F.C., Wu J.H., Hsieh J.C., and Lin T.F. Unstable vortex flow and new inertia-driven vortex rolls resulting from an air jet impinging onto a confined heated horizontal disk. International Journal of Heat and Mass Transfer 49 (2006) 4697-4711
25. Jackson J.D., and Symmons G.R. The pressure distribution in a hydrostatic thrust bearing. International Journal of Mechanical Sciences 7 (1965) 239-242
26. Jensen B.B.B., and Friis A. Critical wall shear stress for the EHEDG test method. Chemical Engineering and Processing 43 (2004) 831-840
27. Jensen B.B.B., and Friis A. Predicting the cleanability of mix-proof valves by use of wall shear stress. Journal of Food Process Engineering 28 (2005) 89-106
28. Jensen B.B.B., Stenby M., and Nielsen D.F. Improving the cleaning effect by changing average velocity. Trends in Food Science & Technology 18 (2007) S52-S63
29. Joscelyne S., and Trägardh C. Kinetics of colloidal deposition and release of polystyrene latex particles in the presence of adsorbed β-lactoglobulin studied using a flow cell. Journal of Colloid and Interface Science 192 (1997) 294-305
30. Klavenes A., Stalheim T., Sjovold O., Josefsen K., and Granum P.E. Attachment of Bacillus cereus spores with and without appendages to stainless steel surfaces. Transactions of the Institution of Chemical Engineers 80 (2002) 312-318
31. Kreith F. Reverse transition in radial source flow between two parallel planes. Physics of Fluids 8 (1965) 1189-1190
32. Lelièvre C., Legentilhomme P., Gaucher C., Legrand J., Faille C., and Bénézech T. Cleaning in place: effect of local wall shear stress variation on bacterial removal from stainless steel equipment. Chemical Engineering Science 57 (2002) 1287-1297
33. Li M., Spoko J.F., and McCamy J.W. Computational fluid dynamic modeling of tin oxide deposition in an impinging chemical vapor deposition reactor. Thin Solid Films 515 (2006) 532-548
34. List W., and Müller J. Reinigungsvalidierung unter besonderer Berücksichtigung von Proteinrückständen. Pharmaceutical Industries 67 (2005) 1359-1365
35. Lorthois S., Schmitz P., and Anglés-Cano E. Experimental study of fibrin/fibrin-specific molecular interactions using a sphere/plane adhesion model. Journal of Colloid and Interface Science 241 (2001) 52-62
36. Moller P.S. Radial flow without swirl between parallel discs. Aeronautical Quarterly 14 (1963) 163-186
37. Moller P.S. A radial diffuser using incompressible flow between narrowly spaced disks. Transactions of the ASME D, Journal of Basic Engineering 88 (1966) 155-162
38. Nakabayashi K., Ichikawa T., and Morinishi Y. Size of annular separation bubble around the inlet corner and viscous flow structure between two parallel disks. Experiments in Fluids 32 (2002) 425-433
39. Park T.H., Choi H.G., Yoo J.Y., and Kim S.J. Streamline upwind numerical simulation of two-dimensional confined impinging slot jets. International Journal of Heat and Mass Transfer 46 (2003) 251-262
40. Patankar S.V. Numerical Heat Transfer and Fluid Flow (1980), McGraw-Hill, New York
41. Perni S., Aldsworth T.G., Jordan S.J., Fernandes I., Barbosa M., Sol M., Tenreiro R.P., Chambel L., Zilhão I., Barata B., Adrião A., Faleiro M.L., Andrew P.W., and Shama G. The resistance to detachment of dairy strains of Listeria monocytogenes from stainless steel by shear stress is related to the fluid dynamic characteristics of the location of isolation. International Journal of Food Microbiology 116 (2007) 384-390
42. Sjollema, J., 1990. Direct observation of particle deposition in a parallel plate flow cell. Application to oral streptococci and polystyrene particles. Ph.D. Thesis, Rijksuniversiteit Groningen, Groningen, The Netherlands.
43. Stephan O., Weisz N., Vieths S., Weiser T., Rabe B., and Vatterott W. Protein quantification, sandwich ELISA, and real-time PCR used to monitor industrial cleaning procedures for contamination with peanut and cellery allergens. Journal of AOAC International 87 (2004) 1448-1457