The molybdate-zinc conversion process

Corrosion Science

Volumn 51, Issue 1, 2009, Pages 151-158

  da Silva, C G ^a   Margarit Mattos, I C P ^a   Mattos, O R ^a   Perrot, H ^b   Tribollet, B ^b   Vivier, V ^b  

^a FEDERAL UNIVERSITY OF RIO DE JANEIRO   (Brazil)

^b CNRS   (France)

Author keywords

A. Zinc; B. EIS; B. SEM; B. XPS

Indexed keywords

ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; MOLYBDENUM; NEGATIVE IONS; PH; PH EFFECTS; POTENTIOMETRIC SENSORS; QUARTZ CRYSTAL MICROBALANCES; X RAY PHOTOELECTRON SPECTROSCOPY; ZINC;

A. ZINC; B. EIS; B. SEM; B. XPS; CHARACTERISTIC REGIONS; CONVERSION PROCESSES; CONVERSION TIMES; ELECTROCHEMICAL MEASUREMENTS; FORMATION KINETICS; SURFACE CHARACTERIZATIONS;

ELECTROCHEMICAL CORROSION;

EID: 58049218863     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2008.10.019     Document Type: Article

References (39)

1. Zhao J., Frankel G., and McCreery R.L. Corrosion protection of untreated AA-2024-T3 in chloride solution by a chromate conversion coating monitored with Raman spectroscopy. J. Electrochem. Soc. 145 (1998) 2258-2264
2. Ramsey J.D., and McCreery R.L. In situ Raman microscopy of chromate effects on corrosion pits in aluminum alloy. J. Electrochem. Soc. 146 (1999) 4076-4081
3. Lytle F.W., Greegor R.B., Bibbins G.L., Blohowiak K.Y., Smith R.E., and Tuss G.D. An investigation of the structure and chemistry of a chromium-conversion surface layer on aluminum. Corros. Sci. 37 (1995) 349-369
4. Gigandet M.P., Faucheu J., and Tachez M. Formation of black chromate conversion coatings on pure and zinc alloy electrolytic deposits: role of the main constituents. Surf. Coat. Technol. 89 (1997) 285-291
5. Almeida E., Fedrizzi L., and Diamantinio T.C. Oxidising alternative species to chromium VI in zinc-galvanised steel surface treatment. Part 2 - An electrochemical study. Surf. Coat. Technol. 105 (1998) 97-101
6. Almeida E., Diamantino T.C., Figueiredo M.O., and Sá C. Oxidising alternative species to chromium VI in zinc galvanised steel surface treatment. Part 1 - A morphological and chemical study. Surf. Coat. Technol. 106 (1998) 8-17
7. Magalhães A.A.O., Margarit I.C.P., and Mattos O.R. Electrochemical characterization of chromate coatings on galvanized steel. Electrochim. Acta 44 (1999) 4281-4287
8. Li Y., Wang H., Hou B., Feng F., and Wei X. Chromate passivation of hot dipped Zn25Al alloy coatings. Brit. Corros. J. 36 (2001) 56-58
9. Ramanauskas R., Gudavičiūte L., Diaz-Ballote L., Bartolo-Perez P., and Quintana P. Corrosion behaviour of chromated Zn and Zn alloy electrodeposits. Surf. Coat. Technol. 140 (2001) 109-115
10. Campestrini P., van Westing E.P.M., Hovestad A., and de Wit J.H.W. Investigation of the chromate conversion coating on Alclad 2024 aluminium alloy: effect of the pH of the chromate bath. Electrochim. Acta 47 (2002) 1097-1113
11. The European Parliament and the Council, Directive 2002/95/EC on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), Off. J. Eur. Union, L 37 (2003) 19-23.
12. Tegehall P.-E., and Vannerberg N.-G. Nucleation and formation of zinc phosphate conversion coating on cold-rolled steel. Corros. Sci. 32 (1991) 635-652
13. Fedrizzi L., Deflorian F., Rossi S., Fambri L., and Bonora P.L. Study of the corrosion behaviour of phosphatized and painted industrial water heaters. Prog. Org. Coat. 42 (2001) 65-74
14. Gabe D.R., and Gould S.E. Black molybdate conversion coatings. Surf. Coat. Technol. 35 (1988) 79-91
15. Wharton J.A., Wilcox G.D., and Baldwin K.R. Non-chromate conversion coating treatments for electrodeposited zinc-nickel alloys. T. I. Met. Finish. 74 (1996) 210-213
16. Han K.P., Ye X.R., and Fang J.L. A protective coating of silicate on zinc-plate. Mater. Corros. 48 (1997) 110-112
17. Wilcox G.D., and Baldwin K.R. An electrochemical evaluation of possible non-chromate conversion coating treatments for electrodeposited zinc-nickel alloys. T. I. Met. Finish. 77 (1999) 152-158
18. Treacy G.M., Wilcox G.D., and Richardson M.O.W. Behaviour of molybdate-passivated zinc coated steel exposed to corrosive chloride environments. J. Appl. Electrochem. 29 (1999) 647-654
19. Magalhães A.A.O., Margarit I.C.P., and Mattos O.R. Molybdate conversion coatings on zinc surfaces. J. Electroanal. Chem. 572 (2004) 433-440
20. Manselfd F., Wang Y., and Shih H. The Ce-Mo process for the development of a stainless aluminum. Electrochim. Acta 37 (1992) 2277-2282
21. Dabalà M., Armelão L., Buchberger A., and Calliari I. Cerium-based conversion layers on aluminum alloys. Appl. Surf. Sci. 172 (2001) 312-322
22. Bethencourt M., Botana F.J., Cano M.J., and Marcos M. High protective environmental friendly and short-time developed conversion coatings for aluminium alloys. Appl. Surf. Sci. 189 (2002) 162-173
23. Fahrenholtz W.G., O'Keefe M.J., Zhou H., and Grant J.T. Characterization of cerium-based conversion coatings for corrosion protection of aluminum alloys. Surf. Coat. Technol. 155 (2002) 208-213
24. da Silva C.G., Correia A.N., de Lima-Neto P., Margarit I.C.P., and Mattos O.R. Study of conversion coatings obtained from tungstate-phosphoric acid solutions. Corros. Sci. 47 (2005) 709-722
25. Emsley J. The Elements. third ed. (1998), Clarendon Press, Oxford
26. Magalhães A.A.O., Tribollet B., Mattos O.R., Margarit I.C.P., and Barcia O.E. Chromate conversion coatings formation on zinc studied by electrochemical and electrohydrodynamical impedances. J. Electrochem. Soc. 150 (2003) B16-B25
27. Gabrielli C., Magalhães A.A.O., Margarit I.C.P., Perrot H., and Tribollet B. Study of chromate-zinc conversion process through microbalance/electroacoustic impedance coupling measurements. Electrochem. Commun. 6 (2004) 492-498
28. Deslouis C., Frateur I., Maurin G., and Tribollet B. Interfacial pH measurement during the reduction of dissolved oxygen in a submerged impinging jet cell. J. Appl. Electrochem. 27 (1997) 482-492
29. Bohnke O., Vuillemin B., Gabrielli C., Keddam M., Perrot H., Takenouti H., and Torresi R. An electrochemical quartz crystal microbalance study of lithium insertion into thin films of tungsten trioxide. I. Modeling of the ionic insertion mechanism. Electrochim. Acta 40 (1995) 2755-2764
30. Bohnke O., Vuillemin B., Gabrielli C., Keddam M., and Perrot H. An electrochemical quartz crystal microbalance study of lithium insertion into thin films of tungsten trioxide. II. Experimental results and comparison with model calculations. Electrochim. Acta 40 (1995) 2765-2773
31. Lazerges M., Perrot H., Zeghib N., Antoine E., and Compere C. In situ QCM DNA-biosensor probe modification. Sensor Actuator B 120 (2006) 329-337
32. Gabrielli C., Huet F., Keddam M., Rousseau P., and Vivier V. Scanning electrochemical microscopy for investigating gas bubble/liquid interfaces. Electrochem. Solid State Lett. 6 (2003) E23-E26
33. Gabrielli C., Huet F., Keddam M., Rousseau P., and Vivier V. Scanning electrochemical microscopy imaging by means of high-frequency impedance measurements in feedback mode. J. Phys. Chem. B 108 (2004) 11620-11626
34. Gabrielli C., Ostermann E., Perrot H., Vivier V., Beitone L., and Mace C. Concentration mapping around copper microelectrodes studied by scanning electrochemical microscopy. Electrochem. Commun. 7 (2005) 962-968
35. Horrocks B.R., Mirkin M.V., Pierce D.T., Bard A.J., Nagy G., and Toth K. Scanning electrochemical microscopy. 19. Ion-selective potentiometric microscopy. Anal. Chem. 65 (1993) 1213-1224
36. Gabrielli C., Joiret S., Keddam M., Perrot H., Portail N., Rousseau P., and Vivier V. Development of a coupled SECM-EQCM technique for the study of pitting corrosion on iron. J. Electrochem. Soc. 153 (2006) B68-B74
37. C. Gabrielli, in: Technical Report No. 004/83, Schlumberger Technologies, 1983.
38. Pourbaix M. Atlas of Electrochemical Equilibria in Aqueous Solution (1974), NACE, Houston
39. Gabrielli C., Keddam M., Minouflet-Laurent F., Ogle K., and Perrot H. Investigation of zinc chromatation: Part II. Electrochemical impedance techniques. Electrochim. Acta 48 (2003) 1483-1490