Finite-element analysis of layered rolling contacts

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 222, Issue 7, 2008, Pages 865-886

  Nikas, G K ^a   Sayles, R S ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Analysis; Coating; Contact; Element; Finite; Finite element analysis; Layer; Rolling

Indexed keywords

COATINGS; FRICTION; THICKNESS MEASUREMENT; TRACTION (FRICTION); TWO DIMENSIONAL;

ANALYSIS; CONTACT; ELEMENT; FINITE; FINITE-ELEMENT ANALYSIS; LAYER;

FINITE ELEMENT METHOD;

EID: 57849157458     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET438     Document Type: Article

References (72)

1. Bhushan, B. Principles and applications of tribology, 1999 (Wiley, USA).
2. Holmberg, K. and Matthews, A. Tribological properties of metallic and ceramic coatings. In Modern tribology handbook (Ed. B. Bhushan), 2001, ch. 23 (CRC Press, USA).
3. Hogmark, S., Jacobson, S., Larsson, M., and Wiklund, U. Mechanical and tribological requirements and evaluation of coating composites. In Modern tribology handbook (Ed. B. Bhushan), 2001, ch. 26 (CRC Press, Boca Raton, FL, USA).
4. Johnson, K. L. Contact mechanics, 1985 (Cambridge University Press, UK).
5. Burmister, D. M. The general theory of stresses and displacements in layered systems. J. Appl. Phys., 1945, 16(2), 89-94.
6. Barovich, D., Kingsley, S. C., and Ku, T. C. Stresses on a thin strip or slab with different elastic properties from that of the substrate due to elliptically distributed load. Int. J. Eng. Sci., 1964, 2(3), 253-268.
7. Chen, W. T. Computation of stresses and displacements in a layered elastic medium. Int. J. Eng. Sci., 1971, 9(9), 775-800.
8. Chen, W. T. and Engel, P. A. Impact and contact stress analysis in multilayered media. Int. J. Solids Struct., 1972, 8(11), 1257-1281.
9. Dhaliwal, R. S. and Rau, I. S. The axisymmetric Boussinesq problem for a thick elastic layer under a punch of arbitrary profile. Int. J. Eng. Sci., 1970, 8(10), 843-856.
10. Gupta, P. K. and Walowit, J. A. Contact stresses between a cylinder and a layered elastic solid. Trans. ASME, J. Lubr. Technol., 1974, 96, 250-257.
11. Kennedy, F. E. and Ling, F. F. Elasto-plastic indentation of a layered medium. Trans. ASME, J. Eng. Mater. Technol., 1974, 96(2), 97-103.
12. Chin, Y. P. and Hartnett, M. J. A numerical solution for layered solid contact problems with application to bearings. Trans. ASME, J. Lubr. Technol., 1983, 105(4), 585-590.
13. King, R. B. Elastic analysis of some punch problems for a layered medium. Int. J. Solids Struct., 1987, 23(12), 1657-1664.
14. King, R. B. and O'Sullivan, T. C. Sliding contact stresses in a two-dimensional layered elastic half-space. Int. J. Solids Struct., 1987, 23(5), 581-597.
15. O'Sullivan, T. C. and King, R. B. Sliding contact stress field due to a spherical indenter on a layered elastic half-space. Trans. ASME, J. Tribol., 1988, 110(2), 235-240.
16. Bhattacharya, A. K. and Nix, W. D. Finite element simulation of indentation experiments. Int. J. Solids Struct., 1988, 24(9), 881-891.
17. Komvopoulos, K. Finite element analysis of a layered elastic solid in normal contact with a rigid surface. Trans. ASME, J. Tribol., 1988, 110(3), 477-485.
18. Komvopoulos, K. Elastic-plastic finite element analysis of indented layered media. Trans. ASME, J. Tribol., 1989, 111(3), 430-439.
19. Tian, H. and Saka, N. Finite element analysis of an elastic-plastic two-layered half-space: sliding contact. Wear, 1991, 148(2), 261-285.
20. Montmitonnet, P., Edlinger, M. L., and Felder, E. Finite element analysis of elastoplastic indentation: part 2: application to hard coatings. Trans. ASME, J. Tribol., 1993, 115(1), 15-19.
21. Wang, H. F. and Bangert, H. Three-dimensional finite element simulation of Vickers indentation on coated systems. Mater. Sci. Eng. A, 1993, 163(1), 43-50.
22. Kral, E. R., Komvopoulos, K., and Bogy, D. B. Finite element analysis of repeated indentation of an elastic-plastic layered medium by a rigid sphere, part I: surface results. Trans. ASME, J. Appl. Mech., 1995, 62(1), 20-28.
23. Kral, E. R., Komvopoulos, K., and Bogy, D. B. Finite element analysis of repeated indentation of an elastic-plastic layered medium by a rigid sphere, part II: sub-surface results. Trans. ASME, J. Appl. Mech., 1995, 62(1), 29-42.
24. Kral, E. R. and Komvopoulos, K. Three-dimensional finite element analysis of subsurface stresses and shakedown due to repeated sliding on a layered elastic medium. Trans. ASME, J. Appl. Mech., 1996, 63(4), 967-973.
25. Kral, E. R. and Komvopoulos, K. Three-dimensional finite element analysis of surface deformation and stresses in an elastic-plastic layered medium subjected to indentation and sliding contact loading. Trans. ASME, J. Appl. Mech., 1996, 63(2), 365-375.
26. 2 coated ball bearings: a three-dimensional finite element analysis. Trans. ASME, J. Tribol., 1997, 119(4), 754-763.
27. Lovell, M. R., Khonsari, M., and Marangoni, R. Parameter identification of hysteresis friction for coated ball bearings based on three-dimensional FEM analysis. Trans. ASME, J. Tribol., 1997, 119(3), 462-470.
28. Wong, S. K., Kapoor, A., and Williams, J. A. Shakedown limits on coated and engineered surfaces. Wear, 1997, 203-204, 162-170.
29. Sen, S., Aksakal, B., and Ozel, A. A finite-element analysis of the indentation of an elastic-work hardening layered half-space by an elastic-sphere. Int. J. Mech. Sci., 1998, 40(12), 1281-1293.
30. Jiang, Y., Xu, B., and Sehitoglu, H. Three-dimensional elastic-plastic stress analysis of rolling contact. Trans. ASME, J. Tribol., 2002, 124(4), 699-708.
31. Xu, B. and Jiang, Y. Elastic-plastic finite element analysis of partial slip rolling contact. Trans. ASME, J. Tribol., 2002, 124(1), 20-26.
32. Ye, N. and Komvopoulos, K. Indentation analysis of elastic-plastic homogeneous and layered media: criteria for determining the real material hardness. Trans. ASME, J. Tribol., 2003, 125(4), 685-691.
33. Kuo, C. H. and Keer, L. M. Contact stress analysis of a layered transversely isotropic half space. Trans. ASME, J. Tribol., 1992, 114(2), 253-262.
34. Ovaert, T. C. On the indentation of a transversely isotropic half-space with application to solid lubricant films. Trans. ASME, J. Tribol., 1993, 115(4), 650-657.
35. Lovell, M. R. Analysis of contact between transversely isotropic coated surfaces: development of stress and displacement relationships using FEM. Wear, 1998, 214(2), 165-174.
36. Lovell, M. R. Determination of compliance relationships for transversely isotropic hard surface coatings using the finite element method. Trans. ASME, J. Tribol., 1999, 121(3), 416-418.
37. Morrow, C. and Lovell, M. Numerical contact analysis of transversely isotropic coatings. Wear, 1999, 236(1-2), 360-367.
38. Morrow, C., Lovell, M., and Deng, Z. Numerical contact analysis of transversely isotropic coatings: a cylinder within a circumferential groove. Trans. ASME, J. Tribol., 2001, 123(2), 436-440.
39. Lovell, M. and Morrow, C. Contact analysis of anisotropic coatings with application to ball bearings. STLE Tribol. Trans., 2006, 49(1), 33-38.
40. Kannel, J. W. and Dow, T. A. Evaluation of contact stresses between rough-elastic and layered cylinders. In Mechanisms and surface distress (Ed. D. Dowson), Proceedings of the 12th Leeds-Lyon Symposium on Tribology, Lyon, France, 1986, pp. 198-206 (Butterworth-Heinemann).
41. Sainsot, P., Leroy, J. M., and Villechaise, B. Effect of surface coatings in a rough normally loaded contact. In Mechanics of coatings, Proceedings of the 16th Leeds-Lyon Symposium on Tribology, Lyon, France, 1990, pp. 151-156 (Elsevier).
42. Merriman, T. and Kannel, J. Analyses of a role of surface roughness on contact stresses between elastic cylinders with and without soft surface coating. Trans. ASME, J. Tribol., 1989, 111(1), 87-94.
43. Cole, S. J. and Sayles, R. S. A numerical model for the contact of layered elastic bodies with real rough surfaces. Trans. ASME, J. Tribol., 1992, 114(2), 334-340.
44. Kadiric, A., Sayles, R. S., Zhou, X. B., and Ioannides, E. A numerical study of the contact mechanics and subsurface stress effects experienced over a range of machined surface coatings in rough surface contacts. Trans. ASME, J. Tribol., 2003, 125(4), 720-730.
45. Cai, S. and Bhushan, B. A numerical three-dimensional contact model for rough, multilayered elastic/plastic solid surfaces. Wear, 2005, 259(7-12), 1408-1423.
46. Cal, S. and Bhushan, B. Three-dimensional dry/wet contact analysis of multilayered elastic/plastic solids with rough surfaces. Trans. ASME, J. Tribol., 2006, 128(1), 18-31.
47. Komvopoulos, K. and Ye, N. Three-dimensional contact analysis of elastic-plastic layered media with fractal surface topographies. Trans. ASME, J. Tribol., 2001, 123(3), 632-640.
48. Leroy, J. M., Floquet, A., and Villechaise, B. Thermomechanical behaviour of multilayered media: theory. Trans. ASME, J. Tribol., 1989, 111(4), 538-544.
49. Leroy, J. M., Floquet, A., and Villechaise, B. Thermomechanical behaviour of multilayered media: results. Trans. ASME, J. Tribol., 1990, 112(2), 317-323.
50. Ye, N. and Komvopoulos, K. Three-dimensional finite element analysis of elastic-plastic layered media under thermomechanical surface loading. Trans. ASME, J. Tribol., 2003, 125(1), 52-59.
51. Gong, Z.-Q. and Komvopoulos, K. Mechanical and thermomechanical elastic-plastic contact analysis of layered media with patterned surfaces. Trans. ASME. J. Tribol., 2004, 126(1), 9-17.
52. Djabella, H. and Arnell, R. D. Finite element comparative study of elastic stresses in single, double layer and multilayered coated systems. Thin Solid Films, 1993, 235(1-2), 156-162.
53. Stephens, L. S., Liu, Y., and Meletis, E. I. Finite element analysis of the initial yielding behaviour of a hard coating/substrate system with functionally graded interface under indentation and friction. Trans. ASME, J. Tribol., 2000, 122(2), 381-387.
54. Gong, Z.-Q. and Komvopoulos, K. Effect of surface patterning on contact deformation of elastic-plastic layered media. Trans. ASME, J. Tribol., 2003, 125 (1), 16-24.
55. Naghieh, G. R., Rahnejat, H., and Jin, Z. M. Characteristics of frictionless contact of bonded elastic and viscoelastic layered solids. Wear, 1999, 232(2), 243-249.
56. Yang, J. and Komvopoulos, K. Dynamic indentation of an elastic-plastic multi-layered medium by a rigid cylinder. Trans. ASME, J. Tribol., 2004, 126(1), 18-27.
57. Ye, N. and Komvopoulos, K. Effect of residual stress in surface layer on contact deformation of elastic-plastic layered media. Trans. ASME, J. Tribol., 2003, 125(4), 692-699.
58. Oliveira, S. A. G. and Bower, A. F. An analysis of fracture and delamination in thin coatings subjected to contact loading. Wear, 1996, 198, 15-32.
59. Sarma, B. Y. and Mayuram, M. M. Some studies on life prediction of thermal sprayed coatings under rolling contact conditions. Trans. ASME, J. Tribol., 2000, 122(3), 503-510.
60. Aslantas, K. and Tasgetiren, S. Debonding between coating and substrate due to rolling-sliding contact. Mater. Des., 2002, 23(6), 571-576.
61. Stewart, S. and Ahmed, R. Rolling contact fatigue of surface coatings - a review. Wear, 2002, 253(11-12), 1132-1144.
62. Bansal, P., Shipway, P. H., and Leen, S. B. Finite element modelling of the fracture behaviour of brittle coatings. Surf Coat. Technol., 2006, 200(18-19), 5318-5327.
63. Elsharkawy, A. A., Holmes, M. J. A., Evans, H. P., and Snidle, R. Micro-elastohydrodynamic lubrication of coated cylinders using coupled differential deflection method. Proc. IMechE, Part J: J. Engineering Tribology, 2006, 220(11), 29-41.
64. Fujino, T., Iwamoto, K., Tanaka, K., and Shima, M. Stress distribution of coated film with a range of coated film thickness and elastic properties under a single EHL operating condition. Tribol. Int., 2007, 40(10-12), 1638-1648.
65. Polonsky, I. A., Chang, T. P., Keer, L. M., and Sproul, W. D. An analysis of the effect of hard coatings on near-surface rolling contact fatigue initiation induced by surface roughness. Wear, 1997, 208(1-2), 204-219.
66. Polonsky, I. A. and Keer, L. M. A fast and accurate method for numerical analysis of elastic layered contacts. Trans. ASME, J. Tribol., 2000, 121(1), 30-35.
67. Da Silva Botelho, T., Progri, R., Inglebert, G., and Robbe-Valloire, F. Elastoplastic indentation of a layered half-space with an infinite length cylinder. Mech. Mater., 2005, 37(6), 629-639.
68. Liu, S., Peyronnel, A., Wang, Q. J., and Keer, L. M. An extension of the Hertz theory for 2D coated components. Tribol. Lett., 2005, 18(4), 505-511.
69. Holmberg, K., Ronkainen, H., Laukkanen, A., and Wallin, K. Friction and wear of coated surfaces - scales, modelling and simulation of tribomechanisms. Surf. Coat. Technol., 2007, 202(4-7), 1034-1049.
70. Nikas, G. K. Fullerene-based opportunities for robust engineering: making optimised surfaces for tribology. Technical report FOR-12/07, Mechanical Engineering Department, Tribology Group, Imperial College London, England, 2007.
71. As, S. K., Skafferud, B., Tveiten, B. W., and Holme, B. Fatigue life prediction of machined components using finite element analysis of surface topography. Int. J. Fatigue, 2005, 27(10-12), 1590-1596.
72. Ioannides, E. and Harris, T. A. A new fatigue life model for rolling bearings. Trans. ASME, J. Tribol., 1985, 107(3), 367-377.