Micro-elastohydrodynamic lubrication of coated cylinders using coupled differential deflection method

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 220, Issue 1, 2006, Pages 29-41

  Elsharkawy, Abdallah A ^a,b   Holmes, M J A ^a   Evans, H P ^a   Snidle, R W ^a  

^a CARDIFF UNIVERSITY   (United Kingdom)

^b KUWAIT UNIVERSITY   (Kuwait)

Author keywords

Coatings; EHL; Rough surfaces; Transient EHL

Indexed keywords

COATING TECHNIQUES; ELASTIC MODULI; ELASTICITY; LUBRICANTS; MATHEMATICAL MODELS; NON NEWTONIAN FLOW; SURFACE ROUGHNESS; VISCOSITY;

COUPLED DIFFERENTIAL DEFLECTION METHOD; EYRING-TYPE NON-LINEAR VISCOUS MODEL;

ELASTOHYDRODYNAMIC LUBRICATION;

COATING TECHNIQUES; ELASTIC MODULI; ELASTICITY; ELASTOHYDRODYNAMIC LUBRICATION; LUBRICANTS; MATHEMATICAL MODELS; NON NEWTONIAN FLOW; SURFACE ROUGHNESS; VISCOSITY;

EID: 33744525881     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501J10005     Document Type: Article

References (41)

1. Alanou, M. P., Evans, H. P., and Snidle, R. W. Effect of different surface treatments and coatings on the scuffing performance of hardened steel disks at very high sliding speeds. Tribol. Int., 2004, 37, 93-102.
2. Gupta, P. K., and Walowit, J. A. Contact stresses between an elastic cylinder and a layered elastic solid. ASME J. Lubr. Technol., 1974, 96, 250-257.
3. King, R. B. and O'Sullivan, T. C. Sliding stresses in a two-dimensional layered elastic half-space. Int. J. Solids Struct., 1987, 23(5), 581-597.
4. Elsharkawy, A. A. and Hamrock, B. J. A numerical solution for dry sliding line contact of multilayered elastic solids. Trans ASME J. Tribol., 1993, 115(2), 237-245.
5. Mao, K., Bell, T., and Sun, Y. Effect of sliding friction on contact stresses for multilayered elastic bodies with rough surfaces. Trans ASME J. Tribol., 1997, 119, 476-480.
6. Ihara, T., Shaw, M. G., and Bhushan, B. A. Finite element analysis of contact stress and strain in an elastic film on a rigid substrate-part I: zero friction. Trans ASME J. Tribol., 1986, 108(4), 527-533.
7. Komvopoulos, K. Finite element analysis of a layered elastic solid in normal contact with a rigid substrate. Trans ASME J. Tribol., 1988, 110(3), 477-597.
8. Tian, H. and Saka, N. Finite element analysis of an elastic-plastic two-layer half space: sliding contact. Wear, 1991, 148, 262-285.
9. Anderson, I. A. and Collins, I. F. Plane strain stress distributions in discrete and blended coated solids under normal and sliding contact. Wear, 1995, 185, 23-33.
10. Ovaert, T. C. and Pan J. Optimal design of layered structures under normal (frictionless) contact loading. Trans ASME J. Tribol., 2002, 124, 438-442.
11. Hooke, C. J. The elastohydrodynamic lubrication of a cylinder on an elastic layer. Wear, 1986, 111(1), 83-99.
12. Elsharkawy, A. A. and Hamrock, B. J. Elastohydrodynamic Lubrication of elastomeric-coated surfaces in line contact. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1995, 209, 119-130.
13. Goryacheva, I., Sadeghi, F., and Xu, C. Viscoelastic effects in lubricated contacts. Wear, 1996, 198, 307-312.
14. Jaffar, M. J. On the microelastohydrodynamic lubrication of an elastomeric bonded layer. Tribol. Int., 2002, 35, 193-200.
15. Goglia, P. R., Cusano, C., and Conry, T. F. The effects of surface irregularities on the elastohydrodynamic lubrication of sliding line contacts, Part I-single irregularities; Part II-wavy surfaces. Trans. ASME J. Tribol., 1984, 106, 104-119.
16. Lubrecht, A. A., Ten Napel, W. E., and Bosma, R. The influence of longitudinal and transverse roughness on the elastohydrodynamic lubrication of circular contacts. Trans. ASME J. Tribol., 1988, 110, 421-426.
17. Kweh, C. C., Evans, H. P., and Snidle, R. W. Microelastohydrodynamic lubrication of an elliptical contact with transverse and three dimensional sinusoidal roughness. Trans. ASME J. Tribol., 1989, 111, 577-584.
18. Elsharkawy, A. A. and Hamrock, B. J. Subsurface stresses in micro-EHL line contacts. Trans. ASME J. Tribol., 1991, 113, 645-655.
19. Chang, L., Webster, M. N., and Jackson, A. On the pressure rippling and roughness deformation in elastohydrodynamic lubrication of rough surfaces. Trans. ASME J. Tribol., 1993, 115, 439-444.
20. Venner, C. H. and Lubrecht, A. A. Transient analysis of surface features in an EHL line contact in the case of sliding. Trans. ASME J. Tribol., 1994, 116, 186-193.
21. Hooke, C. J. The effect of roughness in EHL contacts. Proceedings of 31st Leeds-Lyon Symposium on Tribology, 2005, pp. 31-46 (Elsevier, Amsterdam).
22. Sadeghi, F. A comparison of the fluid model's effect on the internal stresses of rough surfaces. Trans. ASME J. Tribol., 1991, 113, 142-149.
23. Kweh, C. C., Patching, M. J., Evans, H. P., and Snidle, R. W. Simulation of elastohydrodynamic contacts between rough surfaces. Trans. ASME J. Tribol., 1992, 114, 412-419.
24. Venner, C. H. and Ten Napel, W. E. Surface roughness effects in an EHL line contact. Trans. ASME J. Tribol., 1992, 114, 186-191.
25. Ai, X. and Cheng, H. S. Transient EHL analysis for line contacts with measured surface roughness using multigrid technique. Trans ASME J. Tribol., 1994, 116, 549-558.
26. Elcoate, C. D., Evans, H. P., Hughes, T. G. and Snidle, R. W. Thin film, time dependent, micro-EHL solutions with real surface roughness. Proceedings of 25th Leeds-Lyon Symposium on Tribology, 1999, pp. 163-174, Elsevier, Amsterdam.
27. Evans, H. P. and Snidle, R. W. A model for elastohydrodynamic film failure in contacts between rough surfaces having transverse finish. Trans. ASME J. Tribol., 1996, 118(4), 847-857.
28. Johnson, K. L. and Tevaarwark, J. L. Shear behavior of elastohydro-dynamic oil films. Proc. R. Soc. Lond. A, 1977, 356(12), 215-236.
29. Hughes, T. G., Elcoate, C. D., and Evans, H. P. Coupled solution of the elastohydrodynamic line contact problem using a differential deflection method. Proc. Instn Mech. Engrs, Part C. J. Mechanical Engineering Science, 2000, 214, 585-598.
30. Elcoate, C. D., Evans, H. P., Hughes, T. G., and Snidle, R. W. Transient elastohydrodynamic analysis of rough surfaces using a novel coupled differential deflection method. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2001, 215, 319-337.
31. Sneddon, I. N. Fourier transformation, 1951 (McGraw Hill).
32. Evans, H. P. and Hughes, T. G. Evaluation of deflection in semi-infinite bodies by a differential method. Proc. Instn Mech. Engrs. Part C: J. Mechanical Engineering Science, 2000, 214, 563-584.
33. Evans, C. R. and Johnson, K. L. The rheological properties of elastohydrodynamic lubricants. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1986, 200, 303-312.
34. Houpert, L. and Hamrock, B. J. Elastohydrodynamic lubrication calculations as a tool to study scuffing. Proceedings of the 12th Leeds-Lyon Symposium on Tribology, 1985, pp. 146-155 (Mechanical Engineering Publications, Bury St. Edmunds, Suffolk, England).
35. Conry, T. F., Wang, S., and Cusano C. A Reynolds-Eyring equation for elastohydrodynamic lubrication in line contacts. Trans. ASME J. Tribol., 1987, 109, 648-658.
36. Ai, X. and Zeng, L. A general model for microelastohydrodynamic lubrication and its full numerical solution. Trans. ASME J. Tribol., 1989, 111, 569-576.
37. Jacod, B., Lugt, P. M., Dumont, M. L., Tripp, J. H., and Venner, C. H. Amplitude reduction of waviness in elastohydrodynamic lubrication using an eyring fluid model. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2000, 214, 343-350.
38. Tao, G., Hughes, T. G., Evans, H. P., Snidle, R. W., Hopkinson, N. A., Talks, M., and Starbuck, J. M. Elastohydrodynamic lubrication analysis of gear tooth surfaces from micropitting tests Trans. ASME J. Tribol., 2003, 125, 267-274.
39. Venner, C. H. and Lubrecht, A. A. Numerical simulation of a transverse ridge in a circular EHL contact under rolling/sliding. Trans. ASME J. Tribol., 1994, 116, 751-761.
40. Holmes, M. J. A., Qiao, H., Evans, H. P., and Snidle, R. W. Surface contact and damage in micro-EHL. Proceedings of 31st Leeds-Lyon Symposium on Tribology, 2005, pp. 605-616 (Elsevier, Amsterdam).
41. Yoshida, A. and Fujii, M. Influence of soft surface modification on rolling contact fatigue strength of machine elements. Tribol. Int., 2002, 35, 837-847.