Development of WC-Co coatings deposited by warm spray process

Journal of Thermal Spray Technology

Volumn 17, Issue 5-6, 2008, Pages 750-756

  Chivavibul, Pornthep ^a   Watanabe, Makoto ^a   Kuroda, Seiji ^a   Kawakita, Jin ^a   Komatsu, Masayuki ^a   Sato, Kazuto ^b   Kitamura, Junya ^b  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^b FUJIMI INCORPORATED RandD Center   (Japan)

Author keywords

Coating; HVOF; Warm spray; WC Co

Indexed keywords

CO CONTENTS; DEPOSITED COATINGS; FLAME TEMPERATURES; HARDNESS VARIATIONS; HVOF; HVOF COATINGS; SINTERED BULKS; WARM SPRAY; WARM SPRAYS; WC-CO; WC-CO COATINGS; WEAR BEHAVIORS; WEAR PROPERTIES;

COATINGS; FRACTURE; FRACTURE TOUGHNESS; HARDNESS; MECHANICAL PROPERTIES; PESTICIDES; THERMAL SPRAYING; TOUGHNESS; TUNGSTEN ALLOYS;

TUNGSTEN CARBIDE;

EID: 57449112496     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9271-4     Document Type: Conference Paper

References (23)

1. V.V. Sobolev, J.M. Guilemany, and J. Nutting: " High Velocity Oxy-Fuel Spraying," Maney Publishing, UK, 2004.
2. J.M. Guilemany, J.M. de Paco, J. Nutting, and J.R. Miguel, Characterization of the W2c Phase Formed During the High Velocity Oxygen Fuel Spraying of a Wc + 12 Pct Co Powder, Metall. Mater. Trans. A, 30(8), 1999, p 1913-1921.
3. C. Verdon, A. Karimi, and J.L. Martin, A Study of High Velocity Oxy-Fuel Thermally Sprayed Tungsten Carbide Based Coatings. Part 1: Microstructures, Mater. Sci. Eng. A, 246(1-2), 1998, p 11-24.
4. Y. Ishikawa, J. Kawakita, S. Sawa, T. Itsukaichi, Y. Sakamoto, M. Takaya, and S. Kuroda, Evaluation of Corrosion and Wear Resistance of Hard Cermet Coatings Sprayed by Using an Improved HVOF Process, J. Therm. Spray Technol., 14(3), 2005, p 384-390.
5. P. Chivavibul, M. Watanabe, S. Kuroda, and K. Shinoda, Effects of Carbide Size and Co Content on the Microstructure and Mechanical Properties of HVOF-Sprayed WC-Co Coatings, Surf. Coat. Technol., 202(3), 2007, p 509-521.
6. M. Watanabe, A. Owada, S. Kuroda, and Y. Gotoh, Effect of Wc Size on Interface Fracture Toughness of WC-Co HVOF Sprayed Coatings, Surf. Coat. Technol., 201(3-4), 2006, p 619-627.
7. Y. Ishikawa, S. Kuroda, J. Kawakita, Y. Sakamoto, and M. Takaya, Sliding Wear Properties of HVOF Sprayed WC-20%Cr3c2-7%Ni Cermet Coatings, Surf. Coat. Technol., 201(8), 2007, p 4718-4727.
8. R.S. Lima, J. Karthikeyan, C.M. Kay, J. Lindemann, and C.C. Berndt, Microstructural Characteristics of Cold-Sprayed Nanostructured WC-Co Coatings, Thin Solid Films, 416(1-2), 2002, p 129-135.
9. H.J. Kim, C.H. Lee, and S.Y. Hwang, Superhard Nano WC-12%Co Coating by Cold Spray Deposition, Mater. Sci. Eng. A, 391(1-2), 2005, p 243-248.
10. H.J. Kim, C.H. Lee, and S.Y. Hwang, Fabrication of WC-Co Coatings by Cold Spray Deposition, Surf. Coat. Technol., 191(2-3), 2005, p 335-340.
11. M. Watanabe, C. Pornthep, S. Kuroda, J. Kawakita, J. Kitamura, and K. Sato, Development of WC-Co Coatings by Warm Spray Deposition for Resource Savings of Tungsten, Journal of the Japan Institute of Metals, 71, 2007, p 853-859.
12. L. Jacobs, M.M. Hyland, and M. De Bonte, Comparative Study of WC-Cermet Coatings Sprayed via the HVOF and the HVAF Process, J. Therm. Spray Technol., 7(2), 1998, p 213-218.
13. L. Jacobs, M.M. Hyland, and M. De Bonte, Study of the Influence of Microstructural Properties on the Sliding-Wear Behavior of HVOF and HVAF Sprayed WC-Cermet Coatings, J. Therm. Spray Technol., 8(1), 1999, p 125-132.
14. C.J. Li, G.J. Yang, P.H. Gao, J. Ma, Y.Y. Wang, and C.X. Li, Characterization of Nanostructured WC-Co Deposited by Cold Spraying, J. Therm. Spray Technol., 16, 2007, p 1011-1020.
15. L. Ajdelsztajn, B. Jodoin, and J.M. Schoenung, Synthesis and Mechanical Properties of Nanocrystalline Ni Coatings Produced by Cold Gas Dynamic Spraying, Surf. Coat. Technol., 201(3-4), 2006, p 1166-1172.
16. T.H. Van Steenkiste, J.R. Smith, and R.E. Teets, Aluminum Coatings Via Kinetic Spray with Relatively Large Powder Particles, Surf. Coat. Technol., 154(2-3), 2002, p 237-252.
17. J. Kawakita, S. Kuroda, T. Fukushima, H. Katanoda, K. Matsuo, and H. Fukanuma, Dense Titanium Coatings by Modified HVOF Spraying, Surf. Coat. Technol., 201(3-4), 2006, p 1250-1255.
18. S. Kuroda, J. Kawakita, M. Watanabe, and H. Katanoda, Warm Spraying - a Novel Coating Process Based on High-Velocity Impact of Solid Particles, Sci. Technol. Adv. Mater., 9(3), 2008, p 033002.
19. J. Kawakita, S. Kuroda, S. Krebs, and H. Katanoda, In-Situ Densification of Ti Coatings by the Warm Spray (Two-Stage HVOF) Process, Mater. Trans., 47(7), 2006, p 1631-1637.
20. J. Kawakita, N. Maruyama, S. Kuroda, S. Hiromoto, and A. Yamamoto, Fabrication and Mechanical Properties of Composite Structure by Warm Spraying of Zr-Base Metallic Glass, Mater. Trans., 49 (2), 2008, p 317-323.
21. M.M. Lima, C. Godoy, J.C. Avelar-Batista, and P.J. Modenesi, Toughness Evaluation of HVOF WC-Co Coatings Using Non-Linear Regression Analysis, Mater. Sci. Eng. A, 357(1-2), 2003, p 337-345.
22. K. Kim, M. Watanabe, J. Kawakita, and S. Kuroda, Grain Refinement in a Single Titanium Powder Particle Impacted at High Velocity, Scr. Mater. 59(7), 2008, p 768-771.
23. G.S. Upadhyaya: Cemented Tungsten Carbides: Production, Properties, and Testing. Noyes Publications, Westwood, NJ, 1998.