Thermomechanical analysis of elastoplastic bodies in a sliding spherical contact and the effects of sliding speed, heat partition, and thermal softening

Journal of Tribology

Volumn 130, Issue 4, 2008, Pages

  Chen, W Wayne ^a   Wang, Q Jane ^a  

^a Northwestern University   (United States)

Author keywords

Elasto plastic contact; Heat partition; Thermal softening

Indexed keywords

APPROXIMATION THEORY; DISKS (MACHINE COMPONENTS); ELASTOPLASTICITY; FAST FOURIER TRANSFORMS; FORMING; FOURIER TRANSFORMS; FRICTION; MACHINE COMPONENTS; MATHEMATICAL TRANSFORMATIONS; PLASTICS; SHAFTS (MACHINE COMPONENTS); SPHERES; STRAIN HARDENING; THERMOMECHANICAL TREATMENT; THREE DIMENSIONAL;

CONTACT BEHAVIORS; CONTACT MODELS; ELASTO-PLASTIC CONTACT; ELASTOPLASTIC BODIES; FRICTIONAL HEATING; HARDENING BEHAVIORS; HEAT PARTITION; HEAT PARTITIONS; INDUCED HEATS; MECHANICAL LOADINGS; NUMERICAL ALGORITHMS; PLASTIC STRAIN FIELDS; SIMULATION RESULTS; SLIDING SPEEDS; SPHERICAL CONTACTS; STEADY STATES; SUBSURFACE STRESSES; SURFACE PRESSURES; SURFACE TEMPERATURE DISTRIBUTIONS; TEMPERATURE RISES; THERMAL SOFTENING; THERMOMECHANICAL ANALYSES; THREE ORDERS OF MAGNITUDES; TRIBOLOGICAL BEHAVIORS;

CONJUGATE GRADIENT METHOD;

EID: 57149128867     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.2959110     Document Type: Article

References (41)

1. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, London.
2. Carslaw, H. S., and Jaeger, J. C., 1959, Conduction of Heat in Solids, Oxford University Press, London.
3. Francis, H. A., 1970, "Interfacial Temperature Distribution Within a Sliding Hertzian Contact," ASLE Trans., 14, pp. 41-54.
4. Tian, X. F., and Kennedy, F. E., 1994, "Maximum and Average Flash Temperatures in Sliding Contacts," ASME J. Tribol., 116, pp. 167-173.
5. Barber, J. R., 1984, "Thermoelastic Displacements and Stresses Due to a Heat Source Moving Over the Surface of a Half Plane," ASME J. Appl. Mech., 51, pp. 636-640.
6. Huang, J. H., and Ju, F. D., 1985, "Thermomechanical Cracking Due to Moving Frictional Loads," Wear, 102, pp. 81-104.
7. Ju, F. D., and Huang, J. H., 1982, "Heat Checking in the Contact Zone of a Bearing Seal (a Two-Dimensional Model of a Single Moving Asperity)," Wear, 79, pp. 107-118.
8. Wang, S., and Komvopoulos, K., 1994, "A Fractal Theory of the Interfacial Temperature Distribution in the Slow Sliding Regime: Part I - Elastic Contact and Heat Transfer Analysis," ASME J. Tribol., 116, pp. 812-823.
9. Wang, S., and Komvopoulos, K., 1994, "A Fractal Theory of the Interfacial Temperature Distribution in the Slow Sliding Regime: Part II - Multiple Domains, Elastoplastic Contacts and Applications," ASME J. Tribol., 116, pp. 824-832.
10. Wang, S., and Komvopoulos, K., 1995, "A Fractal Theory of the Temperature Distribution at Elastic Contacts of Fast Sliding Surfaces," ASME J. Tribol., 117, pp. 203-215.
11. Komvopoulos, K., 2008, "Effects of Multi-Scale Roughness and Frictional Heating on Solid Body Contact Deformation," C. R. Mec., 336, pp. 149-162.
12. Liu, S. B., and Wang, Q., 2001, "A Three-Dimensional Thermomechanical Model of Contact Between Non-Conforming Rough Surfaces," ASME J. Tribol., 123, pp. 17-26.
13. Boucly, V., Nelias, D., Liu, S. B., Wang, Q., and Keer, L. M., 2005, "Contact Analyses for Bodies With Frictional Heating and Plastic Behavior," ASME J. Tribol., 127, pp. 355-364.
14. Blok, H., 1937, "Theoretical Study of Temperature Rise at Surface of Actual Contact Under Oiliness Lubricating Conditions," Proc. Inst. Mech. Eng., Proceedings of General Discussion on Lubrication and Lubricants, 2, pp. 222-235.
15. Bos, J., and Moes, H., 1995, "Frictional Heating of Tribological Contacts," ASME J. Tribol., 117, pp. 171-177.
16. Clarke, A., Sharif, K. J., Evans, H. P., and Snidle, R. W., 2006, "Heat Partition in Rolling/Sliding Elastohydrodynamic Contacts," ASME J. Tribol., 128, pp. 67-78.
17. Kulkarni, S. M., Rubin, C. A., and Hahn, G. T., 1991, "Elasto-Plastic Coupled Temperature-Displacement Finite Element Analysis of Two-Dimensional Rolling-Sliding Contact With a Translating Heat Source," ASME J. Tribol., 113, pp. 93-101.
18. Gupta, V., Bastias, P., Hahn, G. T., and Rubin, C. A., 1993, "Elasto-Plastic Finite-Element Analysis of 2-D Rolling-Plus-Sliding Contact With Temperature-Dependent Bearing Steel Material Properties," Wear, 169, pp. 251-256.
19. Ye, N., and Komvopoulos, K., 2003, "Three-Dimensional Finite Element Analysis of Elastic-Plastic Layered Media Under Thermomechanical Surface Loading," ASME J. Tribol., 125, pp. 52-59.
20. Gong, Z.-Q., and Komvopoulos, K., 2004, "Mechanical and Thermomechanical Elastic-Plastic Contact Analysis of Layered Media With Patterned Surfaces," ASME J. Tribol., 126, pp. 9-17.
21. Wang, Q., and Liu, G., 1999, "A Thermoelastic Asperity Contact Model Considering Steady-State Heat Transfer," Tribol. Trans., 42(4), pp. 763-770.
22. Liu, G., Wang, Q., and Liu, S. B., 2001, "A Three-Dimensional Thermal-Mechanical Asperity Contact Model for Two Nominally Flat Surfaces in Contact," ASME J. Tribol., 123, pp. 595-602.
23. Gong, Z.-Q., and Komvopoulos, K., 2005, "Thermomechanical Analysis of Semi-Infinite Solid in Sliding Contact With a Fractal Surface," ASME J. Tribol., 127, pp. 331-342.
24. Liu, S. B., Wang, Q., and Harris, S. J., 2003, "Surface Normal Thermoelastic Displacement in Moving Rough Surface Contacts," ASME J. Tribol., 125, pp. 862-868.
25. Yu, H., Liu, S. B., Wang, Q., and Chung, Y. W., 2004, "Influence of Temperature-Dependent Yield Strength on Thermomechanical Asperity Contacts," Tribol. Lett., 17(2), pp. 155-163.
26. Liu, S. B., and Wang, Q., 2003, "Fransient Thermoelastic Stress Fields in a Half-Space," ASME J. Tribol., 125, pp. 33-43.
27. Jacq, C., Nelias, D., Lormand, G., and Girodin, D., 2002, "Development of a Three-Dimensional Semi-Analytical Elastic-Plastic Contact Code," ASME J. Tribol., 124, pp. 653-667.
28. Nelias, D., Antaluca, E., Boucly, V., and Cretu, S., 2007, "A Three-Dimensional Semianalytical Model for Elastic-Plastic Sliding Contacts," ASME J. Tribol., 129, pp. 761-771.
29. Nelias, D., Boucly, V., and Brunet, M., 2006, "Elastic-Plastic Contact Between Rough Surfaces: Proposal for a Wear or Running-in Model," ASME J. Tribol., 128, pp. 236-244.
30. Boucly, V., Netias, D., and Green, I., 2007, "Modeling of the Rolling and Sliding Contact Between Two Asperities," ASME J. Tribol., 129, pp. 235-245.
31. Chen, W. W., Liu, S. B., and Wang, Q., 2008, "FFT-Based Numerical Methods for Elasto-Plastic Contacts of Nominally Flat Surfaces," ASME J. Appl. Mech., 75, p. 011022.
32. Liu, S. B., and Wang, Q., 2002, "Studying Contact Stress Fields Caused by Surface Tractions With a Discrete Convolution and Fast Fourier Transform Algorithm," ASME J. Tribol., 124, pp. 36-45.
33. Chin, Y. P., 1978, "On the Stress Field and Surface Deformation in a Half Space With a Cuboidal Zone in Which Initial Strains Are Uniform," ASME J. Appl. Mech., 45, pp. 302-306.
34. Seo; K., and Mura, T., 1979, "Me Elastic Field in a Half Space Due to Ellipsoidal Inclusions With Uniform Dilatational Eigenstrains," ASME J. Appl. Mech., 46, pp. 568-572.
35. Liu, S. B., Wang, Q., and Liu, G., 2000, "A Versatile Method of Discrete Convolution and FFT (DC-FFT) for Contact Analyses," Wear, 243, pp. 101-111.
36. Johnson, G. R., and Cook, W. H., 1983, "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rate, and Temperatures," Proceedings of the International Symposium, The Hague, The Netherlands, pp. 541-547.
37. Polonsky, I. A., and Keer, L. M., 1999, "A Numerical Method for Solving Rough Contact Problems Based on Multi-Level Multi-Summation and Conjugate Gradient Techniques," Wear, 231, pp. 206-219.
38. Ju, Y., and Farris, T. N., 1996, "Spectral Analysis of Two-Dimensional Contact Problems," ASME J. Tribol., 118, pp. 320-328.
39. Liu, S. B., Hua, D., Chen, W. W., and Wang, Q., 2007, "Tribological Modeling: Application of Fast Fourier Transform," Tribol. Int., 40, pp. 1284-1293.
40. Chen, W. W., Wang, Q., Wang, F., Keer, L. M., and Cao, J., 2008, "Three-Dimensional Repeated Elasto-Plastic Point Contacts, Rolling, and Sliding," ASME J. Appl. Mech., 75, p. 021021.
41. Kogut, L., and Etsion, I., 2003, "A Semi-Analytical Solution for the Sliding Inception of a Spherical Contact," ASME J. Tribol., 125, pp. 499-506.