A semi-analytical solution for sliding inception of a spherical contact

Journal of Tribology

Volumn 125, Issue 3, 2003, Pages 499-506

  Kogut, Lior ^a   Etsion, Izhak ^a  

^a Dept of Mechanical Engineering ^*  (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTICITY; FINITE ELEMENT METHOD; FRICTION; LOADS (FORCES); PLASTICITY;

SPHERICAL CONTACTS;

TRIBOLOGY;

ELASTIC PLASTIC ANALYSIS; ELASTICITY; LOADING; MATHEMATICAL ANALYSIS; MODELING; SLIDING FRICTION;

EID: 0041730645     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1538190     Document Type: Article

References (40)

1. Vu-Quoc, L., and Zhang, X., 1999, "An Accurate and efficient Tangential Force-Displacement Model for Elastic Frictional Contact in Particle-Flow Simulations," Mech. Mater., 31, pp. 235-269.
2. Ogilvy, J. A., 1992, "Numerical Simulation of Elastic-Plastic Contact Between Anisotropic Rough Surfaces," J. Phys. D, 25, pp. 1798-1809.
3. Tichy, J. A., and Meyer, D. M., 2000, "Review of Solid Mechanics in Tribology," Int. J. Solids Struct., 37, pp. 391-400.
4. Bhushan, B., 1996, "Contact Mechanics of Rough Surfaces in Tribology: Single Asperity Contact," Appl. Mech. Rev., 49, pp. 275-298.
5. Adams, G. G., and Nosonovsky, M., 2000, "Contact Modeling-Forces," Tribol. Int., 33, pp. 431-442.
6. Johnson, K. L., 1982, "One Hundred Years of Hertz Contact," Proc. Inst. Mech. Eng., 196, pp. 363-378.
7. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge.
8. Barber, J. R., and Ciavarella, M. 2000, "Contact Mechanics," Int. J. Solids Struct., 37, pp. 29-43.
9. Timoshenko, S. P., and Goodier, J. N., 1970, Theory of Elasticity, 3rd Edition. McGraw-Hill Inc., New York.
10. Goodman, L. E., 1962. "Contact Stren Analysis of Normally Loaded Rough Spheres," ASME J. Appl. Mech., 29, pp. 515-522.
11. Spence, D. A., 1975, "The Hertz Contact Problem with Finite Friction." J. Elast., 5, pp. 297-319.
12. Hills, D. A., and Sackfield, A., 1987, "The Stress Field Induced by Normal Contact Between Dissimilar Spheres," ASME J. Appl. Mech., 54, pp. 8-14.
13. Kosior, F., Guyot, N., and Maurice, G., 1999, "Analysis of Frictional Contact Problem Using Boundary Element Method and Domain Decomposition Method," Int. J. Numer. Methods Eng., 46, pp. 65-82.
14. Mindlin, R. D., 1949, "Compliance of Elastic Bodies in Contact," ASME J. Appl. Mech., 16, pp. 259-268.
15. Mindlin, R. D., and Deresiewicz, H., 1953, "Elastic Spheres in Contact Under Varying Oblique Forces," ASME J. Appl. Mech., 20, pp. 327-344.
16. Bryant, M. D., and Keer, L. M., 1982, "Rough Contact Between Elastically and Geometrically Identical Curved Bodies," ASME J. Appl. Mech., 49, pp. 345-352.
17. Sackfield, A., and Hills, D. A., 1983, "Some Useful Results in the Tangentially Loaded Hertzian Contact Problem," J. Strain Anal., 18, pp. 107-110.
18. Hamilton, G. M., 1983, "Explicit Equations for the Stresses Beneath a Sliding Spherical Contact," Proc. Inst. Mech. Eng., Part C: Mech. Eng. Sci., 197C, pp. 53-59.
19. Hamilton, G. M., and Goodman, L. E., 1966, "The Stress Field Created by a Sliding Circular Contact," ASME J. Appl. Mech., 33, pp. 371-376.
20. Johnson, K. L., 1961, "Energy Dissipation at Spherical Surfaces in Contact Transmitting Oscillating Forces," J. Mech. Eng. Sci., 3, pp. 362-368.
21. Chang, W. R., Etsion, I., and Bogy, D. B., 1988, "Static Friction Coefficient Model for Metallic Rough Surfaces," ASME J. Tribol., 110, pp. 57-63.
22. Roy Chowdhury, S. K., and Ghosh, P., 1994, "Adhesion and Adhesional Friction at the Contact Between Solids," Wear, 174, pp. 9-19.
23. Students, E., and Rudzitis, J., 1996, "Contact of Surface Asperities in Wear," Tribol. Int., 29, pp. 275-279.
24. Mijar, A. R., and Arora, J. S., 2000, "Review of Formulations for Elastostatic Frictional Contact Problems," Structural and Multidisciplinary Optimization, 20, pp. 167-189.
25. Owen, D. R. J., and Hinton, E., 1980, Finite Elements in Plasticity: Theory and Practice, Pineridge Press LTD., Swansea.
26. Tian, H., and Saka, N., 1991, "Finite Element Analysis of an Elastic-Plastic Two-Layer Half-Space: Sliding Contact," Wear, 148, pp. 261-285.
27. Anderson, I. A., and Collins, I. F., 1995, "Plane Strain Stress Distribution in Discrete and Blended Coated Solids Under Normal and Sliding Contact," Wear, 185, pp. 23-33.
28. Kral, E. R., and Komvopoulos, K., 1996, "Three-Dimensional Finite Element Analysis of Surface Deformation and Stresses in an Elastic-Plastic Layered Medium Subjected to Indentation and Sliding Contact Loading," ASME J. Appl. Mech., 63, pp. 365-375.
29. Kral, E. R., and Komvopoulos, K., 1997, "Three-Dimensional Finite Element Analysis of Subsurface Stress and Strain Fields Due to Sliding Contact on an Elastic-Plastic Layered Medium," ASME J. Tribol., 119, pp. 332-341.
30. Tworzydlo, W. W., Cecot, W., Oden, J. T., and Yew, C. H., 1998, "Computational Micro-and Macroscopic Models of Contact and Friction: Formulation, Approach and Applications," Wear, 220, pp. 113-140.
31. Stephens, L. S., Liu, Y., and Meletis, E. I., 2000, "Finite Element Analysis of the Initial Yielding Behavior of a Hard Coating/Substrate System With Functionally Graded Interface Under Indentation and Friction," ASME J. Tribol., 122, pp. 381-387.
32. Faulkner, A., and Arnell, R. D., 2000, "The Development of a Finite Element Model to Simulate the Sliding Interaction Between Two, Three-Dimensional, Elastoplastic, Hemispherical Asperities," Wear, 242, pp. 114-122.
33. Blau, P. J., 2001, "The Significance and Use of the Friction Coefficient," Tribol. Int., 34, pp. 585-591.
34. Giannakopoulos, A. E., Lindley, T. C., and Suresh, S., 1998, "Aspects of Equivalence Between Contact Mechanics and Fracture Mechanics: Theoretical Connections and a Life-Prediction Methodology for Fretting-Fatigue," Acta Mater., 46, pp. 2955-2968.
35. Johnson, K. L., 1996, "Continuum Mechanics Modeling of Adhesion and Friction," Langmuir, 12, pp. 4510-4513.
36. Johnson, K. L., 1997, "Adhesion and Friction Between a Smooth Elastic Spherical Asperity and a Plane Surface," Proc. R. Soc. London, Ser. A, 453, pp. 163-179.
37. Kogut, L., and Etsion, I., 2002, "Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat," ASME J. Appl. Mech., 69, pp. 657-662.
38. Tabor, D., 1951, The Hardness of Metals, Clarendon Press, Oxford.
39. Hodge, P. G., 1959, Plastic Analysis of Structures, McGraw-Hill Book Company, New York.
40. Kogut, L., 2002, "An Elastic-Plastic Model for the Contact and Friction of Rough Surfaces," Ph.D. thesis, Technion-Israel Institute of Technology.