Experimental investigation of combustion and heat transfer in a direct-injection spark ignition engine via instantaneous combustion chamber surface temperature measurements

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering

Volumn 222, Issue 11, 2008, Pages 2035-2049

  Cho, K W ^a   Assanis, D ^a   Filipi, Z ^a   Szekely, G ^b   Najt, P ^b   Rask, R ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

Author keywords

Combustion; Direct injection spark ignition engine; Heat transfer; Surface temperature

Indexed keywords

ATMOSPHERIC TEMPERATURE; COMBUSTION; COMBUSTION CHAMBERS; CYLINDER HEADS; HEAT FLUX; HEAT TRANSFER; IGNITION; MIXTURES; PISTONS; SURFACE PROPERTIES; TEMPERATURE MEASUREMENT; THERMOCOUPLES;

COMBUSTION CHARACTERISTICS; DIRECT INJECTION SPARK IGNITION ENGINES; EXPERIMENTAL INVESTIGATIONS; HEAT TRANSFER CHARACTERISTICS; HEAT TRANSFER CORRELATION; STOICHIOMETRIC MIXTURES; SURFACE TEMPERATURE MEASUREMENT; SURFACE TEMPERATURES;

DIRECT INJECTION;

EID: 57049095031     PISSN: 09544070     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544070JAUTO853     Document Type: Article

References (34)

1. Eichelberg, G. Some new investigations on old combustion-engine problems. Engineering, 1939, 148, 463-466, 547-560.
2. Enomoto, Y., Ohya, T., Ishii, M., Enomoto, K., and Kitahara, N. Study on analysis of instantaneous heat flux flowing into the combustion chamber wall of an internal combustion engine (examination in the case of consideration of heat storage term and the temperature dependency of the thermocouple's thermophysical properties). JSME Int. J. Ser. II, 1992, 35(4), 608-615.
3. Assanis, D. N. and Badillo, E. Evaluation of alternative thermocouple designs for transient heat transfer measurements in metal and ceramic engines. SAE paper 890571, 1989.
4. Tree, D. R. Development of a heat flux gauge for a partially insulated internal combustion engine. MS Thesis, Purdue University, Lafayette, Indiana, USA, 1988.
5. Alkidas, A. C. and Myers, J. P. Transient heat-flux measurements in the combustion chamber of a spark-ignition engine. Trans. ASME, J. Heat Transfer, 1982, 104, 62-67.
6. Alkidas, A. C., Puzinauskas, P. V., and Peterson, R. C. Combustion and heat transfer studies in a spark-ignited optical engine. SAE paper 900353, 1990.
7. Enomoto, Y., Furuhama, S., and Minakami, K. Heat loss to combustion chamber wall of 4-stroke gasoline engine (1st report, heat loss to piston and cylinder). Bull. JSME, 1985, 28(238), 647-655.
8. Enomoto, Y. and Furuhama, S. A study of the local heat transfer coefficient on the combustion chamber walls of a four stroke gasoline engine. JSME Int. J. Series II, 1989, 32(1), 107-114.
9. Enomoto, Y., Kitahara, N., and Takenaka, T. Thermal load of four cylinder gasoline engine with carburetor. JSAE Rev., 1990, 11(1).
10. Hayes, T. K., White, R. A., and Peters, J. E. Combustion chamber temperature and instantaneous local heat flux measurements in a spark ignition engine. SAE paper 930217, 1993.
11. Harigaya, Y., Toda, F., and Suzuki, M. Local heat transfer on a combustion chamber wall of a spark-ignition engine. SAE paper 931130, 1993.
12. Myers, J. P. and Alkidas, A. C. Effects of combustion-chamber surface temperature on the exhaust emissions of a single-cylinder spark-ignition engine. SAE paper 780642, 1978.
13. Syrimis, M. Characterization of knocking condition and heat transfer in a spark ignition engine, PhD Thesis, University of Illinois, Urbana, Illinois, USA, 1996.
14. Toda, F., Harigaya, Y., Ohyagi, S., Iwamoto, S., and Yoshida, M. Instantaneous heat flux in a side valve type spark-ignition engine. JASE Rev., 1986, 7(1), 16-25.
15. Wimmer, A., Pivec, R., and Sams, T. Heat transfer to the combustion chamber and port walls of IC engines - measurement and prediction. SAE paper 2000-01-0568, 2000.
16. Assanis, D. N. and Friedmann, F. A telemetry linkage system for piston temperature measurements in a diesel engine. SAE paper 910299, 1991.
17. Ogawa, H., Kimura, S., and Enomoto, Y. A study of heat rejection and combustion characterisitcs of a low-temperature and pre-mixed combustion concept based on measurement of instantaneous heat flux in a direct-injection diesel engine. SAE paper 2000-01-2792, 2000.
18. Uchimi, T., Taya, K., Hagihara, Y., Kimura, S., and Enomoto, Y. Heat loss to the combustion chamber wall in a D.I. diesel engine - first report: tendency of heat loss to piston surface. JSAE Rev., 2000, 21, 133-135.
19. Sihling, K. and Woschni, G. Experimental investigation of the instantaneous heat transfer in the cylinder of a high speed diesel engine. SAE paper 790633, 1979.
20. Steeper, R. R. and Stevens, E. J. Characterization of combustion, piston temperatures, fuel sprays, and fuel-air mixing in a DISI optical engine. SAE paper 2000-01-2900, 2000.
21. Kato, N., Moritsugu, M., Shimura, T., and Matsui, J. Piston temperature measuring technology using electromagnetic induction. SAE paper 2001-01-2027, 2001.
22. Wang, X., Price, P., Stone, C. R., and Richardson, D. Heat release and heat flux in a spray-guided direct-injection gasoline engine. Proc. IMechE, Part D: J. Automobile Engineering, 2007, 221(11), 1441-1465.
23. Woschni, G. A Universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE paper 670931, 1967.
24. Hohenberg, G. F. Advanced approaches for heat transfer calculations. SAE paper 790825, 1979.
25. Coaxial thermocouple probes, Medtherm Corporation Bulletin 500, Huntsville, Alabama, USA, 2000.
26. Furuhama, S. and Enomoto, Y. Heat transfer into ceramic combustion wall of internal combustion engine. SAE paper 870153, 1987.
27. Li, C. H. Piston thermal deformation and friction considerations. SAE paper 820086, 1982.
28. Overbye, V. D., Bennethum, J. E., Uyehara, O. A., and Myers, P. S. Unsteady heat transfer in engines. SAE Trans., 1961, 69, 461-494.
29. Alkidas, A. C. Heat transfer characteristics of a spark-ignition engine. Trans. ASME, J. Heat Transfer, 1980, 102, 189-193.
30. Borman, G. and Mshiwaki, K. Internal-combustion engine heat transfer. Prog. Energy Combust. Sci., 1987, 13, 1-46.
31. Hey wood, J. B. Internal combustion engine fundamentals, 1988 (McGraw-Hill, New York).
32. Cho, K. Characterization of combustion and heat transfer in a direct injection spark ignition engine through measurements of instantaneous combustion chamber surface temperature. PhD Thesis, University of Michigan, Ann Arbor, Michigan, USA, 2003.
33. Gatowski, J. A., Balles, E. N., Chun, K. M., Nelson, F. E., Ekchian, J. A., and Heywood, J. B. Heat release analysis of engine pressure data. SAE paper 841359, 1984.
34. Chang, J., Filipi, Z., Assanis, D., Kuo, T.-W., Najt, P., and Rask, R. New heat transfer correlation for the HCCI engine derived from measurements of instantaneous surface heat flux. J. Engines, 2004, 113(3), 1576-1593; SAE paper 2004-01-2996, 2004.