Effects of in Situ YAG on Properties of the Pressurless Annealed SiC-TiB2 Electroconductive Ceramic Composites

Transactions of the Korean Institute of Electrical Engineers

Volumn 57, Issue 5, 2008, Pages 808-815

  Shin, Yong Deok ^a   Ju, Jin Young ^a   Ko, Tae Hun ^a  

^a NONE

Author keywords

Electroconductive ceramic composite; Liquid phase sintered(LPS); PTCR; Transition metal TiB2; YAG(Al5Y3O12); ZrB2

Indexed keywords

ADDITIVES; ALUMINUM; ANNEALING; CARBON FIBER REINFORCED PLASTICS; CERAMIC MATERIALS; ELECTRIC PROPERTIES; ELECTRIC RESISTANCE; GRAIN GROWTH; LASERS; MECHANICAL PROPERTIES; METAL ANALYSIS; MICROSTRUCTURE; POWDER METALLURGY; SINTERING; TRANSITION METALS; YTTRIUM ALLOYS;

AB NORMAL GRAIN GROWTHS; ANNEALED TEMPERATURES; APPLIED PRESSURES; DURING PHASE; ELECTRICAL PROPERTIES; ELECTRICAL RESISTIVITIES; ELECTROCONDUCTIVE CERAMIC COMPOSITE; ELECTROCONDUCTIVE CERAMIC COMPOSITES; FLEXURAL STRENGTHS; GASEOUS PRODUCTS; IN-SITU; NEGATIVE TEMPERATURES; PHASE ANALYSES; PRESSURELESS; PTCR; RELATIVE DENSITIES; RESISTANCE TEMPERATURES; ROOM TEMPERATURES; SIC AND AL; SINTERING ADDITIVES; SINTERING AIDS; SINTERING TEMPERATURES; TEMPERATURE RANGES; VICKER'S HARDNESSES; YAG(AL5Y3O12); YOUNG'S MODULUS; ZRB2;

SILICON CARBIDE;

EID: 56649088265     PISSN: 19758359     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (51)

1. 3 Ratio on Inter-Granualar Phases and Films in Tape-Casting a-SiC with High Toughness", Acta Materialia, 53[8], pp. 2521-2529, 2005.
2. 2 Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering(II)", Trans. KIEE, Vol. 50C[6], pp. 263-270, 2001.
3. S. G. Lee and Y. W. Kim, "Relationship between Microstructure and Fracture Toughness of Toughened Silicon Carbide Ceramics", J. Am. Ceram. Soc., 84[6], pp. 1347-1353, 2001
4. Joe J. Cao, Warren J. Moberlychan, Lutgard C. Dejonghe, Christopher J. Gilbert and Robert O. Ritchie "In Situ Toughened Silicon Carbide Al-B-C Additions", J. Am. Ceram. Soc., 79[2], pp. 461-469, 1996.
5. S. K. Lee, Dy. K. Kim and Ch. H. Kim "Raw-Tolerance and R-Curve Behavior of Liquid-Phase-Sintered Silicon Carbides with Different Microstructures", J. Am Ceram. Soc., 78[1], pp. 65-70, 1995.
6. 2 Electrocondutive Ceramic Composites by Spray Dry", Trans, KIEE, Vol. 52C[8], pp. 335-341, 2003.
7. L. K. L. Falk, "Microstructural Development during Liquid Phase Sintering of Silicon Carbide Ceramics", Journal of the European Ceramic Society, 17. pp. 983-994, 1997.
8. 2-Reinforced Tenary Composites", Adanced Engineering Materials, 6[9], pp. 775-781, 2004.
9. 2", Journal of the European Ceramic Society, 25. pp. 1771-1780, 2005.
10. Jingxian Zhang, Rong Huang, Hui Gu, Dongliang Jiang, Qingling Lin and Zhengren Huang, "High Toughness in Laminated SiC Ceramics from Aqueous tape Casting" Scripta Materialia., 52[5], pp. 381-385, 2005.
11. 2", Advanced Engineering Materials, 5[7], pp. 508-512, 2003.
12. 2 Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering", Trans. KIEE, Vol. 49[9], pp. 510-515, 2000.
13. Guo-Dong Zhan, Rong-Jun Xie and Mamoru Mitomo, "Effect of β-to-α Phase Transformation on the Microstructural Development and Mechanical Properties of Fine-Grained Silicon Carbide Ceramics", J. Am Ceram. Soc., 84[5]. pp. 945-950, 2001.
14. J. H. She and K. Ueno., "Densification Behavior and Mechanical Properties of Pressureless-Sintered Silicon Carbide Ceramics with Alumina and Yttria Additions", Materials Chemistry and Physics., 59, pp. 139-142, 1999.
15. R. W. Carpenter , W. Braue and Raymond A. Cutler, "Transmission Electron Microscopy of Liquid Phase Densified SiC" J. Mater Res., 6[9] pp. 1937-1944, 1991.
16. Da Chen, Xiao-Feng Zhang and Robert O. Ritchie, "Effects of Grain-Boundary Structure on the Strength, Toughness, and Cyclic-Fatigue Properties of a Monolithic Silicon Carbide", J. Am. Ceram. Soc., 83[8]. pp. 2079-2081, 2000.
17. Xiao Feng Zhang, Mark E. Sixta and Lutgard C. De Jonghe "Grain Boundary Evolution in Hot-Pressed ABC-SiC", J. Am Ceram Soc., 83[11]. pp. 2813-2820, 2000.
18. Xiao Feng Zhang, Qing Yang and Lutgard C. De Jonghe "Microstucture Development in Hot-Pressed Silicon Carbide: Effects of Aluminum, Boron, and Carbon Additives", Acta Materialia, 51 [13], pp. 3849-3860, 2003.
19. Cathleen Mroz, "Titanium Diboride" J. Am. Ceram. Soc., Bull., 74[6], pp. 158-159, 1995.
20. 2 Composites" J. Mater. Sci. Korea, 5[1], pp. 19-24, 1999.
21. 2 Composite" Journal of Materials Science, 28, pp. 649-653, 1993
22. Y. H. Koh, S. Y. Lee and H. E. Kim, "Oxidation Behavior of Titanium Boride at Elevated Temperatures" J. Am Ceram Soc., 84[1], pp. 239-241, 2001.
23. Alina Kulpa and Tom Troczynski, "Oxidation of TiB2 Powders below 900°C" J. Am Ceram Soc., 79[2], pp. 518-520, 1996.
24. 2 Composite" J. Am Ceram Soc., Bull, 66[2], pp. 322-324, 1987
25. Mark M. Opeka, Inna G. Talmy, Eric J. Wuchina, James A. Zaykoski and Samuel J. Causey, "Mechanical Thermal, and Oxidation Properties of Refractory Hafnium and Zirconium Compounds", Journal of the European Ceramic Society, 19. pp. 2405-2414, 1999..
26. D. Sciti and A. Bellosi, "Effects of Additives on Densification, Microstructure and Properties of Liquid-Phase Sintered Silicon Carbide", J. Mat Sci. Lett., 35, pp. 3849-3855, 2000.
27. D. Sciti, S. Guicciardi and A Bellosi, "Effect of Annealing Treatments on Mcrostmcture and Mechanical Properties of Liquid-Phase-Sintered Silicon Carbide", Journal of the European Ceramic Society, 21. pp. 621-632, 2001.
28. M. Nader, F. Aldinger and M. J. Hoffmann, "Influence of the a/β Phase Transformation on Microstructural Development and Mechanical Properties of Liquid Phase Sintered Silicon Carbide", J. Mat. Sci., 34. pp. 1197-1204, 1999.
29. J. Y. Kim, Y. W. Kim, Mitomo, M., Zhan, G. D. and Lee, J. G., "Microstructure and Mechanical Properties of α-Silicon Carbide Sintered with Yttrium-Aluminum Garnet and Silica", J. Am Ceram Soc., 82[2], pp. 441-444, 1999.
30. 3 Determined by Optical Differential Thermal Analysis", J. Mater Sci., 15, pp. 1709-1718, 1980.
31. S. S. Shinozaki S, Robert M. Williams, B. N. Juterbock ,William T. Donlon, Jon Hangas and C. R. Peters, "Microstructural Developments in Pressureless -Sintered β-SiC Materials with Al, B, and C Additions", J. Am Ceram Soc., Bull, 64[10], pp. 1389-1393, 1985.
32. Robert M. Williams, B. N. Juterbock, S. S. Shinozaki, C. R. Peters and Thomas J. Whalen, "Effects of Sintering Temperatures on the Physical and Crystallographic Properties of β-SiC", J. Am Ceram. Soc., Bull, 64[10], pp. 1385-1389, 1985.
33. Nitin P. Padture and Brian R. Lawn, "Toughness Properties of a silicon Carbide with an in Situ Induced Heterogeneous Grain Structure" J. Am. Ceram Soc., 77[10], pp. 2518-2522, 1994.
34. Y. W. Kim, M. Mitomo, H. Emoto, J. G. Lee, "Effect of Initial a-Phase Content on Microstructure and Mechanical Properties of Sintered Silicon Carbidea", J. Am Ceram Soc., 81[12], pp. 3136-3140, 1998.
35. Y. W. Kim, M. Mitomo and H. Hirotsuru, "Microstructure Development of Silicon Carbide Containing Large Seed Grains", J. Am Ceram Soc., 80[1], pp. 99-105, 1997.
36. Carl H. Mcmurtry, Wolfgang D. G. Boecker. Srinivasa G. Seshadri, Joseph S. Zanghi and John E. Garnier "Microstructure and Material Properties of SiC-TiB2 Particulate Composites", Am. Ceram Soc. Bull., 66[2], pp. 325-329, 1987.
37. J. B. Hurst and S. Dutta, " Simple Processing Method for High-strength Silicon Carbide", J. Am. Ceram Soc., 70[11]. pp. C303-C308, 1987.
38. Lee, J. K., Tanaka, H. and Kim, H., "Movement of Liquid Phase and the Formation of Surface Reaction Layer on the Sintering of β-SiC with an Additive of Yttrium Aluminium Garnet", J. Mat. Sci., 15. pp. 409-411, 1996.
39. Y. W. Kim, W. J. Kim and D. H. Cho, "Effect of Additive Amount on Microstructure and Mechanical Properties of Self-reinforced Silicon Carbide", J. Mater. Sci. Lett., 16. pp.1384-1386, 1997.
40. J. Y. Kim, Y. W. Kim, J. G. Lee, and K. S. Cho, "Effect of Annealing on Mechanical Properties of Self-reinforced alpha-Silicon Carbide", J. Mat. Sci., 34. pp. 2325-2330, 1999.
41. Hui Gu, Takayuki Nagano, Guo-Dong Zhan, Mamoru Mitomo and Fumihiro Wakai, "Dynamic Evolution of Grain Boundary Films in Liquid-Phase-Sintered Ultrafine Silicon Carbide Material", J. Am. Ceram. Soc., 86[10], pp. 1753-1760, 2003.
42. 2 Ceramics", Journal of the European Ceramic Society, 22. pp. 1045-1049, 2002.
43. 3 and SiC", Journal of the European Ceramic Society, 25, pp. 1005-1013, 2005.
44. Peterson, I. M. and Tien, T. Y., "Effect of the Grain Boundary Thermal Expansion Coefficient on the Fracture Toughness of Silicon Nitride", J. Am. Ceram. Soc., 78[9], pp. 2345-2352, 1995.
45. Oyelayo O. ajayi, Ali Erdemir, Richard H. Lee and Fred A. Nichols, "Sliding Wear of Silicon Carbide-Titanium Boride Ceramic-Matrix Composite" J. Am Ceram. Soc., 76[2], pp. 511-517, 1993.
46. Ming-Jen Pan, Patrica A. Hoffman, David J. Green and John R. Hellmann, "Elastic Properties and Microcracking Behavior of Particulate Titanium Diboride-Silicon Carbide Composites" J. Am Ceram. Soc., 80[3], pp. 692-698, 1997.
47. L. J. Gibson and M. F. Ashby, "The Mechanics of Three-Dimensional Cellular Materials" Proc. R. Soc London. A382, pp. 43-59, 1982.
48. Frederic Monteverde, Stefano Guicciardi and Alida Bellosi, "Advances in Microstucture and Mechanical Properties of Zirconium Diboride based Ceramics", Materials Science and Engineering A, 346. pp. 310-319, 2003.
49. Jow-Lay Huang and Jyh-Ming Jih, "Investigation of SiC-AlN: Partii, Mechanical Properties" J. Am Ceram. Soc., 79[5], pp. 1262-1264, 1996.
50. 2" J. Am. Ceram. Soc., 78[6], pp. 1606-1610, 1995.
51. 2 Electroconductive Ceramic Composites by Pressureless Annealing" Trans. KIEE, Vol. 52C, No. 2, pp. 80-84, 2003.