Three-dimensional discrete element models for asphalt mixtures

Journal of Engineering Mechanics

Volumn 134, Issue 12, 2008, Pages 1053-1063

  You, Zhanping ^a   Adhikari, Sanjeev ^a   Dai, Qingli ^a  

^a Michigan Technological University   (United States)

Author keywords

Aggregates; Asphalts; Discrete elements; Micromechanics; Mixtures; Three dimensional models; Two dimensional models; Voids

Indexed keywords

AGGLOMERATION; AGGREGATES; ASPHALT; BITUMINOUS MATERIALS; CONCRETES; CONTENT BASED RETRIEVAL; DRAG; DYNAMIC RESPONSE; IMAGE ENHANCEMENT; LARGE SCALE SYSTEMS; MICROSTRUCTURE; MIXTURES; STIFFNESS; TWO DIMENSIONAL;

2D MODELS; 3D MICROSTRUCTURES; 3D MODELS; AGGREGATE MODULUS; AIR VOIDS; ASPHALT MIXTURES; COMPRESSIVE LOADS; DISCRETE ELEMENT MODELS; DISCRETE ELEMENTS; DYNAMIC MODULUS; EXPERIMENTAL MEASUREMENTS; LOADING CYCLES; LOADING FREQUENCIES; STRESS STRAINS; THREE-DIMENSIONAL MODELS; TWO-DIMENSIONAL MODELS; VOIDS;

THREE DIMENSIONAL;

AGGREGATE; ASPHALT; DISCRETE ELEMENT METHOD; LOADING; MICROMECHANICS; MICROSTRUCTURE; NUMERICAL MODEL; STRESS-STRAIN RELATIONSHIP; THREE-DIMENSIONAL MODELING; TWO-DIMENSIONAL MODELING; VOID;

EID: 56549087103     PISSN: 07339399     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9399(2008)134:12(1053)     Document Type: Article

References (51)

1. Abbas, A., Masad, E., Papagiannakis, T., and Shenoy, A. (2005). "Modelling asphalt mastic stiffness using discrete element analysis and micromechanics-based models." Int. J. Pavement Eng. ZZZZZZ1029-8436, 6(2), 137-146.
2. Airey, G. D., Rahimzadeh, B., and Collop, A. C. (2004). "Linear rheological behavior of bituminous paving materials." J. Mater. Civ. Eng. JMCEE70899-156110.1061/(ASCE)0899-1561(2004)16:3(212), 16(3), 212-220.
3. Buttlar, W. G., Bozkurt, D., Al-Khateeb, G. G., and Waldhoff, A. S. (1999). "Understanding asphalt mastic behavior through micromechanics." Transportation Research Record. 1681, Transportation Research Board, Washington, D.C., 157-169.
4. Buttlar, W. G., and Dave, E. V. (2005). "A micromechanics-based approach for determining presence and amount of recycled asphalt pavement material in asphalt concrete (with discussion)." Asphalt Paving Technol. ZZZZZZ0066-9466, 74, 829-884.
5. Buttlar, W. G., and You, Z. (2001). "Discrete element modeling of asphalt concrete: Microfabric approach." Transportation Research Record. 1757, Transportation Research Board, Washington, D.C., 111-118.
6. Chang, C. S., and Chao, S.-J. (1991). "Discrete element method for bearing capacity analysis." Comput. Geotech. ZZZZZZ0266-3524, 12(4), 273-288.
7. Chang, C. S., and Chao, S.-J. (1994). "Discrete element analysis for active and passive pressure distribution on retaining wall." Comput. Geotech. ZZZZZZ0266-3524, 16(4), 291-310.
8. Chang, G. K., and Meegoda, J. N. (1999). "Micro-mechanic model for temperature effects of hot mixture asphalt concrete." J. Trans. Res. Record. 1687, Transportation Research Board, Washington, D.C., 95-103.
9. Chang, K. G., and Meegoda, J. (1997). "Micromechanical simulation of hot mix asphalt." J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(1997)123:5(495), 123(5), 495-503.
10. Christensen, D. W., Pellien, T., and Bonaquist, R. F. (2003). "Hirsch models for estimating the modulus of asphalt concrete." Asphalt Paving Technol. ZZZZZZ0066-9466, 72, 97-121.
11. Christensen, R. M., and Lo, K. H. (1979). "Solutions for effective shear properties in three phase sphere and cylinder models." J. Mech. Phys. Solids JMPSA80022-509610.1016/0022-5096(79)90032-2, 27, 315-330.
12. Collop, A. C., McDowell, G. R., and Lee, Y. (2004). "Use of the distinct element method to model the deformation behavior of an idealized asphalt mixture." Int. J. Pavement Eng. ZZZZZZ1029-8436, 5, 1-7.
13. Counto, V. J. (1964). "The effect of the elastic modulus of the aggregate on the elastic modulud, creep, and creep recovery of concrete." Mag. Concrete Res. MCORAV0024-9831, 62(48), 129-138.
14. Cundall, P. A. (1971). "A computer model for simulating progressive large scale movements in blocky rock systems." Proc., Int. Symp. Rock Fracture, ISRM, Vol. II-8, Nancy, France, 129-136.
15. Cundall, P. A. (1987). Distinct element models of rock and soil structure, E. T. Brown, ed., George Allen and Unwin, London.
16. Cundall, P. A. (1990). "Numerical modelling of jointed and faulted rock." Proc., Int. Conf. on Mechanics of Jointed and Faulted Rock, Mechanics of jointed and faulted rock, Balkema, Rotterdam, The Netherlands, 11-18.
17. Cundall, P. A. (2000). "A discontinuous future for numerical modelling in geomechanics?" Geotech. Eng. GTEGB20046-5828, 149(1), 41-47.
18. Dai, Q., and Sadd, M. H. (2004). "Parametric model study of microstructure effects on damage behavior of asphalt samples." Int. J. Pavement Eng. ZZZZZZ1029-8436, 5(1), 19-30.
19. Dai, Q., Sadd, M. H., Parameswaran, V., and Shukla, A. (2005). "Prediction of damage behaviors in asphalt materials using a micromechanical finite-element model and image analysis." J. Eng. Mech. JENMDT0733-939910.1061/(ASCE)0733-9399(2005)131:7(668), 131(7), 668-677.
20. Dai, Q., Sadd, M. H., and You, Z. (2006). "A micromechanical finite element model for viscoelastic creep and viscoelastic damage behavior of asphalt mixture." Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-906110.1002/nag.520, 30, 1135-1158.
21. Dai, Q., and You, Z. (2007). "Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models." J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(2007)133:2(163), 133(2), 163-173.
22. Guddati, M. N., Feng, Z., and Kim, R. (2002). "Toward a micromechanics-based procedure to characterize fatigue performance of asphalt concrete." Transportation Research Record. 1789, Transportation Research Board, Washington, D.C., 121-128.
23. Hart, R., Cundall, P. A., and Lemos, J. (1988). "Formulation of a three-dimensional distinct element model-part II. Mechanical calculations for motion and interaction of a system composed of many polyhedral blocks." Int. J. Rock Mech. Min. Sci. Geomech. Abstr. IJRMA20148-906210.1016/0148-9062(88)92294-2, 25(3), 117-125.
24. Hashin, Z. (1962). "The elastic moduli of heterogeneous materials." J. Appl. Mech. JAMCAV0021-8936, 29, 143-150.
25. Hashin, Z. (1965). "Viscoelastic behaviour of heterogeneous media." J. Appl. Mech. JAMCAV0021-8936, 32(9), 630-636.
26. Hashin, Z., and Shtrikman, S. (1963). "A variational approach to the theory of the elastic behaviour of multiphase materials." J. Mech. Phys. Solids JMPSA80022-509610.1016/0022-5096(63)90060-7, 11, 127-140.
27. Hirsch, T. J. (1962). "Modulus of elasticity of concrete affected by elastic moduli of cement paste matrix and aggregate." J. Am. Concr. Inst. JACIAX0002-8061, 59(3), 427-452.
28. Itasca Consulting Group. (2004a). PFC 2D Version 3.1, Minneapolis.
29. Itasca Consulting Group. (2004b). PFC 3D Version 3.1, Minneapolis.
30. Kerner, E. H. (1956). "The elastic and thermo-elastic properties of composite media." Proc. Phys. Soc. London, Sect. B PPSBAP0370-130110.1088/0370-1301/69/8/305, 69, 808-813.
31. Kim, H., and Buttlar, W. G. (2005). "Micro mechanical fracture modeling of asphalt mixture using the discrete element method." Electron. J. Assoc. Asph. Paving Technol. ZZZZZZ1553-5576(AAPT), Vol. 74E 209-223.
32. Kose, S., Guler, M., Bahia, H. U., and Masad, E. (2000). "Distribution of strains within asphalt binders in HMA using image and finite element techniques." Transportation Research Record. 1728, Transportation Research Board, Washington, D.C., 21-27.
33. Li, G., Li, Y., Metcalf, J. B., and Pang, S.-S. (1999). "Elastic modulus prediction of asphalt concrete." J. Mater. Civ. Eng. JMCEE70899-156110.1061/(ASCE)0899-1561(1999)11:3(236), 11(3), 236-241.
34. Li, Y., and Metcalf, J. B. (2005). "Two-step approach to prediction of asphalt concrete modulus from two-phase micromechanical models." J. Mater. Civ. Eng. JMCEE70899-156110.1061/ (ASCE)0899-1561(2005)17:4(407), 17(4), 407-415.
35. Masad, E., Jandhyala, V. K., Dasgupta, N., Somadevan, N., and Shashidhar, N. (2002). "Characterization of air void distribution in asphalt mixes using x-ray computed tomography." J. Mater. Civ. Eng. JMCEE70899-156110.1061/(ASCE)0899-1561(2002)14:2(122), 14(2), 122-129.
36. Mori, T., and Tanaka, K. (1973). "Average stress in matrix and average elastic energy of materials with misfitting inclusions." Acta Metall. AMETAR0001-616010.1016/0001-6160(73)90064-3, 21, 571-574.
37. Ng, T.-T. (2006). "Input parameters of discrete element methods." J. Eng. Mech. JENMDT0733-939910.1061/ (ASCE)0733-9399(2006)132:7(723), 132(7), 723-729.
38. Ng, T. T., and Changming, W. (2001). "Comparison of a 3-D DEM simulation with MRI data." Int. J. Numer. Analyt. Meth. Geomech. IJNGDZ0363-9061, 25(5), 497-507.
39. Papagiannakis, A. T., Abbas, A., and Masad, E. (2002). "Micromechanical analysis of viscoelastic properties of asphalt concretes." Transportation Research Record. 1789, Transportation Research Board, Washington, D.C., 113-120.
40. Park, S. W., Kim, Y. R., and Lee, H. J. (1999). "Fracture toughness for microcracking in a viscoelastic particulate composite." J. Eng. Mech. JENMDT0733-9399, 125(6), 722-725.
41. Rothenburg, L., Bogobowicz, A., Hass, R., Jung, F. W., and Kennepohl, G. (1992). "Micromechanical modelling of asphalt concrete in connection with pavement rutting problems." Proc., 7th Int. Conf. on the Struct. Des. of Asphalt Pavements, Rd. Res. Lab, Univ. of Michigan, Ann Arbor, Mich., 476-498.
42. Sadd, M. H., Dai, Q., and Parameswaran, V. (2003). "Simulation of asphalt materials using finite element micromechanical model with damage mechanics." Transportation Research Record. 1832, Transportation Research Board, Washington, D.C., 86-95.
43. Sadd, M. H., Dai, Q., and Parameswaran, V. (2004). "Microstructural simulation of asphalt materials: Modeling and experimental studies." J. Mater. Civ. Eng. JMCEE70899-156110.1061/ (ASCE)0899-1561(2004)16:2(107), 16(2), 107-115.
44. Shimizu, Y., and Cundall, P. A. (2001). "Three-dimensional DEM simulations of bulk handling by screw conveyors." J. Eng. Mech. JENMDT0733-939910.1061/(ASCE)0733-9399(2001)127:9(864), 127(9), 864-872.
45. Thornton, C. (1979). "Conditions for failure of a face-centered cubic array of uniform rigid spheres." Geotechnique GTNQA80016-8505, 29(4), 441-459.
46. Wang, L. B., Myers, L. A., Mohammad, L. N., and Fu, Y. R. (2003). "Micromechanics study on top-down cracking." Transportation Research Record. 1853, Transportation Research Board Washington, D.C., 121-133.
47. You, Z., and Buttlar, W. G. (2004). "Discrete element modeling to predict the modulus of asphalt concrete mixtures." J. Mater. Civ. Eng. JMCEE70899-156110.1061/(ASCE)0899-1561(2004)16:2(140), 16(2), 140-146.
48. You, Z., and Buttlar, W. G. (2005). "Application of discrete element modeling techniques to predict the complex modulus of asphalt-aggregate hollow cylinders subjected to internal pressure." Transportation Research Record. 1929, Transportation Research Board, Washington, D.C., 218-226.
49. You, Z., and Buttlar, W. G. (2006). "Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixture using the distinct element method." Transportation Research Record. 1970, Transportation, Research Board, Washington, D.C., 73-83.
50. You, Z., Buttlar, W. G., and Dai, Q. (2006). "Aggregate effect on asphalt mixture properties by modeling particle-to-particle interaction." Proc., Sessions of the 15th U.S. National Congress of Theoretical and Applied Mechanics, American Society of Civil Engineers, L. Wang and E. Masad, eds., Boulder, Colo., 14-21.
51. You, Z., and Dai, Q. (2007). "A review of advances in micromechanical modeling of aggregate-aggregate interaction in asphalt mixture." Can. J. Civ. Eng. CJCEB80315-1468, 34(2), 239-252.