Correlation between phase evolution, mechanical properties and instrumented indentation response of TiB2-based ceramics

Journal of the European Ceramic Society

Volumn 29, Issue 3, 2009, Pages 505-516

  Mukhopadhyay, Amartya ^a   Raju, G B ^a   Basu, Bikramjit ^a   Suri, A K ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

^b BHABHA ATOMIC RESEARCH CENTRE   (India)

Author keywords

Hot pressing; Mechanical properties; MoSi2; Phase evolution; TiB2

Indexed keywords

BENDING STRENGTH; BORIDES; BUILDING MATERIALS; CERAMIC MATERIALS; CHEMICAL ANALYSIS; FRACTURE; FRACTURE TOUGHNESS; HARDNESS; HOT PRESSING; MOLYBDENUM; SILICON; SINTERING; STRENGTH OF MATERIALS; TITANIUM; TITANIUM OXIDES; TOUGHNESS; UNLOADING; VICKERS HARDNESS; VICKERS HARDNESS TESTING;

DENSIFICATION BEHAVIOURS; DEPTH SENSING; FLEXURAL STRENGTHS; HIGH HARDNESSES; HIGH TEMPERATURE CERAMICS; INSTRUMENTED INDENTATIONS; MATERIAL PROPERTIES; MAXIMUM VALUES; MECHANICAL RESPONSES; MICROSTRUCTURAL DEVELOPMENTS; MOSI2; PHASE EVOLUTION; PHASE EVOLUTIONS; SECONDARY PHASES; SIZE EFFECTS; TIB2; UNLOADING CURVES; VICKERS HARDNESS MEASUREMENTS; VICKERS INDENTATIONS; VICKERS INDENTER;

MECHANICAL PROPERTIES;

EID: 56249138244     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2008.06.030     Document Type: Article

References (41)

1. Cutler, R. A., Engineering properties of borides. In Engineered Materials Handbook. Vol. 4. Ceramics and Glasses. ASM International. The Materials Information Society, USA; 1991.
2. 2-based materials. Int. Mater. Rev. 51 (2006) 352-374
3. Munro R.G. Material properties of titanium diboride. J. Res. Nat. Inst. Stand. Tech. 105 5 (2000) 709-720
4. 2 composite at 850 °C. J. Eur. Ceram. Soc. 26 1-2 (2006) 187-192
5. 2 ceramics. J. Am. Ceram. Soc. 66 1 (1983) C2-C4
6. Telle, R., Boride and carbide ceramics. In Materials Science and Technology. Vol. 11. Structure and Properties of Ceramics, ed. R. W. Cahn, P. Haasen, and E. J. Kramer. Swain VCH, Weinheim, Germany, 1994, p. 175.
7. 2. J. Am. Ceram. Soc. 70 8 (1987) 527-530
8. 2 ceramics. J. Eur. Ceram. Soc. 22 (2002) 1045-1049
9. 2 sinter-additive: a first report. J. Am. Ceram. Soc. 89 1 (2006) 131-138
10. Petzow, G., Telle, R., New development in the field of refractory hard metals based on cemented borides. In Advanced Ceramics, ed. S. Somiya. Tokyo, 1987, p. 131-43.
11. Einarsrud M., Hagen E., Petterson G., and Grande T. Pressureless sintering of titanium diboride with nickel, nickel boride, and iron additives. J. Am. Ceram. Soc. 80 12 (1997) 3013-3020
12. Kang S.H., Kim D.J., Kang E.S., and Baek S.S. Pressureless sintering and properties of titanium diboride ceramics containing chromium and iron. J. Am. Ceram. Soc. 84 4 (2001) 893-895
13. Baumgartner H.R., and Steiger R.A. Sintering and properties of titanium diboride made from powder synthesized in a plasma-arc heater. J. Am. Ceram. Soc. 67 3 (1984) 207-212
14. Li L.H., Kim H.E., and Kang E.S. Sintering and mechanical properties of titanium diboride with aluminum nitride as a sintering aid. J. Eur. Ceram. Soc. 22 (2002) 973-977
15. Park J.H., Koh Y.H., Kim H.E., Hwang C.S., and Kong E. Densification and mechanical properties of titanium diboride with silicon nitride as a sintering aid. J. Am. Ceram. Soc. 82 11 (1999) 3037-3042
16. 4C based composites. Int. J. Ref. Met. Hard. Mater. 14 (1996) 305-310
17. 2-AlN composites. J. Am. Ceram. Soc. 85 4 (2002) 1022-1024
18. 2-based materials against bearing steel under water and oil lubrication. Wear 250 (2001) 631-641
19. Murata Y., Julien H.P., and Whitney E.D. Densification and wear resistance of ceramic systems. I. Titanium diboride. Ceram. Bull. 46 7 (1967) 643-648s
20. 2 with different silica contents. Metal. Mater. Trans. A 34 (2003) 1069-1088
21. Anstis G.R., Chantukul P., Lawn B.R., and Marshall D.B. A critical evaluation of indentation techniques for measuring fracture toughness. I. Direct crack measurements. J. Am. Ceram. Soc. 64 (1981) 533-538
22. Evans A.G., and Charles E.A. Fracture toughness determinations by indentation. J. Am. Ceram. Soc. 59 7-8 (1976) 371-372
23. Ic of brittle solids by the indentation method with low crack-to-indent ratios. J. Mater. Sci. Lett. 1 (1982) 13-16
24. Jones S.L., Norman C.J., and Shahani R. Crack-profile shapes formed under a Vickers indent pyramid. J. Mater. Sci. Lett. 6 (1987) 721-723
25. Mukhopadhyay A., Basu B., Bakshi S.D., and Mishra S.K. Int. J. Ref. Met. Hard. Mater. 25 (2007) 179-188
26. 2 additives. Mater. Sci. Eng. A 105/106 (1998) 125-129
27. 2 ceramics. Int. J. Ref. Met. Hard. Mater. 23 (2005) 350-357
28. Riedel, R., Handbook of Ceramic Hard Materials. Vol. 2. Wiley-VCH Verlag GmbH, Weinheim (Federal Republic of Germany), 2000, p. 968-90.
29. Chollacoop N., Dao M., and Suresh S. Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51 (2003) 3713-3729
30. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7 6 (1992) 1564-1583
31. Pharr G.M., Oliver W.C., and Brotzen F.R. On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation. J. Mater. Res. 7 3 (1992) 613-617
32. Oliver W.C., and Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements in methodology. J. Mater. Res. 19 1 (2004) 3-20
33. Venkatesh T.A., Vliet K.J.V., Giannakopoulos A.E., and Suresh S. Determination of elasto-plastic properties by instrumented sharp indentation: guidelines for property extraction. Scripta Mater. 42 (2000) 833-839
34. Zeng K., and Chiu C.H. An analysis of load-penetration curves from instrumented indentation. Acta Mater. 49 (2001) 3539-3551
35. 4-matrix composites. J. Am. Ceram. Soc. 85 4 (2002) 954-960
36. Raju G.B., and Basu B. Densification, sintering reactions and properties of titanium diboride with titanium disilicide as a sintering aid. J. Am. Ceram. Soc. 90 11 (2007) 3415-3423
37. Davidge R.W. Mechanical behaviour of ceramics. In: Cahn R.W., Thompson M.W., and Ward I.M. (Eds). Cambridge Solid State Science Series (1979), University Press, Cambridge
38. Clarke F.J.P. Residual strain and the fracture stress-grain size relationship in brittle solids. Acta Metall. 12 (1964) 139-143
39. Krell A. A new look at grain size and load effects in the hardness of ceramics. Mater. Sci. Eng. A 245 (1998) 277-284
40. Carpinetri A., and Puzzi S. A fractal approach to indentation size effect. Eng. Fract. Mech. 73 15 (2006) 2110-2122
41. Ritcher V., and Ruthendorf M.V. On hardness and toughness of ultrafine and nanocrystalline hard materials. Int. J. Ref. Met. Hard. Mater. 17 (1999) 141-152