Processing and properties of monolithic TiB2 based materials

International Materials Reviews

Volumn 51, Issue 6, 2006, Pages 352-374

  Basu, B ^a   Raju, G B ^a   Suri, A K ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

^b BHABHA ATOMIC RESEARCH CENTRE   (India)

Author keywords

Mechanical properties; Microstructure; Oxidation; Sintering; TiB2; Tribology

Indexed keywords

ELASTIC MODULI; GRAIN GROWTH; MICROSTRUCTURE; OXIDATION; SINTERING; SMELTING; THERMODYNAMIC STABILITY; TRIBOLOGY; WEAR RESISTANCE;

SINTER ADDITIVES; TITANIUM DIBORIDE;

TITANIUM COMPOUNDS;

EID: 33845526814     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/174328006X102529     Document Type: Review

References (111)

1. R. A. Cutler: 'Engineering properties of borides', in 'Engineered materials handbook', Vol. 4, 'Ceramics and glasses', 787-801; 1991, Materials Park, OH, ASM International.
2. Y. M. Chiang, D. Birnie and W. D. Kingery: 'Physical ceramics: principles for ceramic science and engineering', 398-404; 1997, New York, John Wiley & Sons.
3. R. Telle: 'Boride and carbide ceramics', in 'Materials science and technology', (ed. R.W. Cahn et al.), Vol. 11, 175; 1994, Weinheim, VCH.
4. G. V. D. Goor, P. Sägesser and K. Berroth: Solid State Ionics, 1997, 1163, 101-103.
5. P. Ettmayer, H. Kolaska, W. Lengauer and K. dreyer: Int. J. Refract. Met. Hard Mater., 1995, 13, 343-351.
6. G. E. D'Errico, S. Bugliosi and E. Gugliemi: J. Mater. Process. Technol., 1998, 77, 337-343.
7. D. Moskowitz and M. Humenik, Jr: Mod. Dev. Powder Metall., 1966, 3, 83-94.
8. S. Put, J. Vleugels and O. Vanderbiest: P/M Sci. Technol. Briefs, 2001, 3, (3), 14-17.
9. 2-coated cathode reduction cells', in 'Light metals', (ed. E. Cutshall), 427-429; 1991, Warrendale, PA, TMS.
10. F. De Mestral and F. Thevenot: J. Mater. Sci., 1991, 26, 5547-5560.
11. B. Basu, J. Vleugels and O. Van Der Biest: Mater. Sci. Eng. A, 2004, 380A, 215-221.
12. B. Basu, J. H. Lee and D. Y. Kim: J. Am. Ceram. Soc., 2004, 87, (9), 1771-1774.
13. B. Basu: Int. Mater. Rev., 2005, 50, (4), 239-256.
14. B. Basu, J. Vleugels and O. Van Der Biest: J. Eur. Ceram. Soc., 2005, 25, 3629-3637.
15. S. Zang: Mater. Sci. Eng. A, 1993, 163A, 141-148.
16. W. D. Schubert, A. Bock and B. Lux: Int. J. Refract. Met. Hard Mater., 1995, 13, 281-296.
17. T. Yamamoto, A. Jaroenworaluck, Y. Ikuhara and T. Sakuma: J. Mater. Res., 1999, 14, (11), 4129-4131.
18. L. S. Siegl and K. A. Schwetz: Powder Metall. Int., 1991, 23, 221.
19. A. Bellosi, G. De Portu and S. Guicciardi: J. Eur. Ceram. Soc., 1992, 10, 307-315.
20. A. H. Jones, C. Trueman, R. S. Dobedoe, J. Huddleston and M. H. Lewis: Br. Ceram. Trans., 2001, 100, (2), 49-54.
21. J. L. Murray, P. K. Liao and K. E. Spear: 'The B-Ti (borontitanium) system', Bull. Alloy Phase Diag., 1986, 7, (6), 550-554.
22. R. G. Munro: J. Res. Natl. Inst. Stand. Technol., 2000, 105. (5), 709-720.
23. M. Berger, M. Larsson and S. Hogmark: Surf. Coat. Technol., 2000, 124, 253-261.
24. R. Riedel: 'Handbook of ceramic hard materials', Vol. 2, 968-990; 2000, Weinheim, WILEY-VCH Verlag GmbH.
25. M. Bengisu: 'Engineering ceramics', 469-472; 2001, Berlin, Heidelberg, Springer-Verlag.
26. L. Rao, E. G. Gillan and R. B. Kaner: J. Mater. Res., 1995, 10, 333.
27. L. Chen, Y. Gu, Y. Qian, L. Shi, Z. Yang and J. Ma: Mater. Res. Bull., 2004, 39, 609-613.
28. T. S. R. Ch. Murthy, B. Basu, R. Balasubramaniam, A. K. Suri, C. Subramonian and R. K. Fotedar: J. Am. Ceram. Soc., 2006, 89, (1), 131-138.
29. K. Biswas, B. Basu, A. K. Suri and K. Chattopadhyay: Scr. Mater., 2006, 54, 1363-1368.
30. S. E. Bates, W. E. Buhro, C. A. Frey, S. M. L. Sastry and K. F. Kelton: J. Mater. Res., 1995, 10, 2599.
31. R. L. Axelbaum, D. P. DuFaux, C. A. Frey, K. F. Kelton, S. A. Lawton, L. J. Rosen and S. M. L. Sastry: J. Mater. Res., 1996, 11. 948-954.
32. A. Y. Hwang and J. K. Lee: Mater. Lett., 2002, 54, 1-7.
33. A. K. Khanra, L. C. Pathak, S. K. Mishra and M. M. Godkhindi: Mater. Lett., 2004, 58, 733-738.
34. Y. Gu, Y. Qian, L. Chen and F. Zhou: J. Alloy. Compd, 2003, 352, 325-327.
35. S. Baik and P. F. Becher: J. Am. Ceram. Soc., 1987, 70, (8), 527-530.
36. W. Wang, Z. Fu, H. Wang and R. Yuan: J. Eur. Ceram. Soc., 2002, 22, 1045-1049.
37. S. Torizuka, J. Harada and H. Nishio: Ceram. Eng. Sci. Proceed., 1990, 11, (9-10), 1454-1460.
38. Y. Muraoka, M. Yoshinaka, K. Hirota and O. Yamaguchi: Mater. Res. Bull., 1996, 31, (7), 787-792.
39. S. K. Bhaumik, C. Diwakar, A. K. Singh and G. S. Upadhyaya: Mater. Sci. Eng. A, 2000, 279A, 275-281.
40. R. Telle, S. Meyer, G. Petzow and E. D. Franz: Mater. Sci. Eng. A, 1988, 105/106A, 125-129.
41. C. E. Holcombe and N. L. Dykes: J. Mater. Sci., 1991, 26, 3730-3738.
42. Z. S. Rak and J. Czechowski: J. Eur. Ceram. Soc., 1998, 18, 373-380.
43. J. Deng, J. Zhou, Y. Feng and Z. Ding: Ceram. Int., 2002, 28, 425-430.
44. D. H. Kuo and W. M. Kriven: J. Eur. Ceram. So., 1998, 18, 51-57.
45. A. H. Jones, R. S. Dobedoe and M. H. Lewis: J. Eur. Ceram. Soc., 2001, 21, 969-980.
46. M. H. Satia, I. J. Torres, C. Castillo, T. S. Sudarshan, J. Lesage and D. Chicot: Int. J. Refract. Met. Hard Mater., 2005, 24, (1-2), 183-188.
47. A. L. Chamberlain, W. G. Fahrenholtz and G. E. Hilmas: J. Am. Ceram. Soc., 2006, 89, (2), 452-456.
48. M. K. Ferber, P. F. Becher and C. B. Finch: Commun. Am. Ceram. Soc., Jan. 1983, C-2, C-3.
49. H. R. Baumgartner and R. A. Steiger: J. Am. Ceram. Soc., 1984, 67, (3), 207-212.
50. S. H. Kang and D. J. Kim, E. S. Kang and S. S. Baek: J. Am. Ceram. Soc., 2001, 84, (4), 893-895.
51. E. S. Kang, C. W. Jang, C. H. Lee, C. H. Kim and D. K. Kim: J. Am. Ceram. Soc., 1989, 72, (10), 1868-1872.
52. M. Einarsrud, E. Hagen, G. Pettersen and T. Grande: J. Am. Ceram. Soc., 1997, 80, (12), 3013-3020.
53. T. Graziani and A. Bellosi: Mater. Manufact. Process., 1994, 9, (4), 767-780.
54. A. Bellosi and F. Monteverde: Proc. Euro PM99, Turin, Italy, November 1999, European Powder Metallurgy Association, 261-268.
55. H. Itoh, S. Naka, T. Matsudaira and H. Hamamoto: J. Mater. Sci., 1990, 25, 533-536.
56. A. S. Nakane, Y. Takano, M. Yoshinaka, K. Hirota and O. Yamaguchi: J. Am. Ceram. Soc., 1999, 82, (6), 1627-1628.
57. J. M. Sanchez, M. G. Barandika, J. G. Sevillano and F. Castro: Scr. Metall. Mater., 1992, 26, 957-962.
58. F. Monteverde, A. Bellosi and S. Guicciardi: J. Eur. Ceram. Soc., 2002, 22, 279-288.
59. J. Russias, S. Cardinast, Y. Aguni, G. Fantozzi, K. Bienvenu and J. Fontaine: Int. J. Refract. Met. Hard Mater., 2005, 23, 358-362.
60. L. H. Li, H. E. Kim and E. S. Kang: J. Eur. Ceram. Soc., 2002, 22, 973-977.
61. S. Torizuka and T. Kishi: Mater. Trans. JIM, 1996, 37, (4), 782-787.
62. S. Torizuka, K. Sato, J. Harada, H. Vamamot and H. Nishio: J. Ceram. Soc. Jpn. 1992, 100, (4), 392-397.
63. Y. Murata, H. P. Julien and E. D. Whitney: Ceram. Bull., 1967, 46, (7), 643-648.
64. J. H. Park, Y. H. Koh, H. E. Kim, C. S. Hwang and E. Kong: J. Am. Ceram. Soc., 1999, 82, (11), 3037-3042.
65. J. H. Park, Y. H. Lee, Y. H. Koh, H. E. Kim and S. S. Baek: J. Am. Ceram. Soc., 2000, 83, (6), 1542-1544.
66. S. Torizuka, K. Sato, H. Nishio and T. Kishi: J. Am. Ceram. Soc., 1995, 78, (6), 1606-1610.
67. E. S. Kang and C. H. Kim: J. Mater. Sci., 1990, 25, 580-584.
68. H. J. Kim, H. J. Choi and J. G. Lee: J. Am. Ceram. Soc., 2002, 85, (4), 1022-1024.
69. S. Tuffe, J. Dubois, G. Fantozzi and G. Barbier: Int. J. Refract. Met. Hard Mater., 1996, 14, 305-310.
70. B. Bhusan and B. K. Gupta: 'Handbook of tribology', 'Materials, coatings, and surface treatments': 1991, New York, McCraw-Hill.
71. B. Basu, R. G. Vitchev, J. Vleugels, J. P. Celis and O. Vanderbiest: Acta Mater., 2000, 48, 2461-2471.
72. B. Basu, J. Vleugels, M. Kalin and O.Vanderbiest: Mater. Sci. Eng. A. 2003, 359A. 228-236.
73. R. Wasche, D. Klaffke and T. Troczynski: Wear, 2004, 256, 695-704.
74. Q. Yang, T. Senda, N. Kotani and A. Hirose: Surf. Coat. Technol., 2004, 184, 270-277.
75. H. Czichos, D. Klaffke, E. Santner and M. Woydt: Wear, 1995, 190, 155-161.
76. H. Engqvist, N. Axen and S. Hogmark: Wear. 1999, 232, 157-162.
77. P. Larsson, N. Axen and S. Hogmark: Wear, 1999, 236, 73-80.
78. A. Blomberg, M. Olsson and S. Hogmark: Wear. 1994, 171, 77-89.
79. Z. Xingzhong, L. Jiajun, Z. Baoliang, O. Jinlin and X. Qunji: Ceram. Int., 1998, 24, 13-18.
80. R. B. Bhagat, J. C. Conway, Jr. M. F. Amateau, R. A. Brezler, III: Wear, 1996, 201, 233-243.
81. T. Venkateswaran, D. Sarkar and B. Basu: J. Am. Ceram. Soc., 2005, 88, (3), 691-697.
82. B. Basu, J. Vleugels and O. Vanderbiest: J. Mater. Res., 2003, 18, (6), 1314-1324.
83. J. Vleugels, B. Basu, K. C. H. Kumar, R. G. Vitchev and O. Vanderbiest: Metall. Mater. Trans. A, 2002, 33A, 3847-3859.
84. B. Basu, J. Vleugels and O. Vanderbiest: Wear, 2001, 250, 631-641.
85. T. S. R. Ch. Murthy, B. Basu, A. Srivastava, R. Balasubramaniam and A. K. Suri: J. Eur. Ceram. Soc., 2006, 26, 1293-1300.
86. Y. H. Koh, H. W. Kim and H. E. Kim: J. Mater. Res., 2001, 16, (1), 132-137.
87. A. Kulpa and T. Troczynski: J. Am. Ceram. Soc, 1996, 79, (2), 518-520.
88. M. G. Barandika, J. J. Echeberria and F. Castro: Mater. Res. Bull. 1999, 34, (7), 1001-1011.
89. A. Tampieri and A. Bellosi: J. Mater. Sci., 1993, 28, 649-653.
90. A. Tampieri, E. Landi and A. Bellosi: J. Therm. Anal., 1992, 38, 2657-2668.
91. Y. H. Koh, S. Y. Lee and H. E. Kim: J. Am. Ceram. Soc., 2001, 84, (1), 139-141.
92. T. Graziani, E. Landi and A. Bellosi: J. Mater. Sci. Lett., 1993, 12, 691-694.
93. V. A. Lavrenko, S. S. Chuprov, A. P. Umanskii, T. G. Protsenko, and E. S. Lugovskaya: Sov. Powder Metall. Met. Ceram., 1987, 26, 761-762.
94. T. S. R. Ch. Murthy, R. Balasubramaniam, B. Basu, A. K. Suri and M. N. Mungole, J. Eur. Ceram. Soc., 2006, 26, (1-2), 187-192.
95. F. Monteverde and A. Bellosi: J. Eur. Ceram. Soc., 2005, 25, 1025-1031.
96. H. J. Choi, J. G. Lee and Y. W. Kim: J. Am. Ceram. Soc., 2002, 85, (9), 2281-2286.
97. B. Casas, X. Ramis, M. Anglada, J. M. Salla and L. Lianes: Int. J. Refract. Met. Hard Mater., 2001, 19, 303-309.
98. V. A. Lavrenko, J. Desmaison, A. D. Panasyuk and M. Desmaison-Brut: J. Eur. Ceram. Soc., 2003, 23, 357-369.
99. R. Mitra: Int. Mater. Rev., 2006, 51, 13-64.
100. G. Kennedy, L. Ferranti, M. Zhou and N. Thadhani: J. Appl. Phys., 2002, 91, (4). 1921-1927.
101. D. P. Dandekar and D. C. Benfanti: J. Appl. Phys., 1993, 73, (2), 673-679.
102. A. R. Keller and M. Zhou: J. Am. Ceram. Soc., 2003, 86, (3), 449-457.
103. E. Medvedovski (ed.): 'Ceramic transactions', Vol. 151, 'Ceramic armor materials by design', 20-32: 2003, Nashville, TN, The American Ceramic Society.
104. W. McCauley, A. Crowson, W. A. Gooch, Jr, A. M. Rajendra, S. J. Bless, K. V. Logan, M. Normandia and S. Wax (eds.): 'Ceramic transactions', Vol. 134, 'Ceramic armor materials by design', 385-395; 2002, Nashville, TN. The American Ceramic Society.
105. M. Dionne, G. L'esperance and A. Mirchi: Metall. Mater. Trans. A, 2001, 32A, 2649-2656.
106. E. W. Dewing: Metall. Muter. Trans. A, 1989, 20A, 2185-2187.
107. A. A. Abdel-Hamid and F. Durand: Metall Mater. Trans. A. 1986, 17A, 349-351.
108. K. D. Watson and J. M. Toguri: Metall. Mater. Trans. B. 1991, 22B, 617-621.
109. Q. Fang and R. Knodler: J. Mater. Sci., 1992, 27, 6725-6729.
110. C. S. Choi, Q. Wang, C. M. Osburn, G. A. Ruggles and A. S. Shah: IEEE Trans. Electron Dev., 1992, 39, (10), 2341-2345.
111. T. Venkateswaran, B. Basu, G. B. Raju and Doh-Yeon Kim: J. Eur. Ceram. Soc., 2006, 26, 2431-2440.