Citrate-nitrate auto-combustion synthesis of perovskite-type nanopowders: A systematic approach

Journal of the European Ceramic Society

Volumn 29, Issue 3, 2009, Pages 439-450

  Deganello, F ^a   Marci G ^b   Deganello, G ^a,b  

^a CNR   (Italy)

^b UNIVERSITY OF PALERMO   (Italy)

Author keywords

Citrate nitrate auto combustion synthesis; Fuel cells; Microstructure final; Perovskites; Powders chemical preparation

Indexed keywords

ACIDS; ADSORPTION; CERIUM; COBALT; COMBUSTION; ELECTRIC BATTERIES; FUEL CELLS; GAS ADSORPTION; MICROSCOPIC EXAMINATION; NITRATES; NITROGEN COMPOUNDS; OXIDE MINERALS; PEROVSKITE; PH; PH EFFECTS; PHASE COMPOSITION; SEGREGATION (METALLOGRAPHY); SMOKE; STRONTIUM COMPOUNDS; SYNTHESIS (CHEMICAL); THERMOCHEMISTRY; TRANSITION METALS;

CITRATE-NITRATE AUTO-COMBUSTION SYNTHESIS; COMBUSTION PROCESSES; DOPANT SEGREGATIONS; FINAL PRODUCTS; FORMATION TEMPERATURES; HEAT DISPERSIONS; HIGH PH VALUES; INSOLUBLE COMPOUNDS; MORPHOLOGICAL PROPERTIES; NANO POWDERS; NITROGEN ADSORPTIONS; PH VALUES; SCANNING ELECTRONS; SYNTHESIS CONDITIONS; SYSTEMATIC APPROACHES; TYPE STRUCTURES; X-RAY DIFFRACTIONS;

COMBUSTION SYNTHESIS;

EID: 56249104750     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2008.06.012     Document Type: Article

References (63)

1. Patil K.C., Aruna S.T., and Mimani T. Combustion synthesis: an update. Curr. Opin. Solid State Mater. Sci. 6 (2002) 507-512
2. Jain S.R., Adiga K.C., and Pai Verneker V.R. A new approach to thermochemical calculations of condensed fuel-oxidizer mixtures. Combust. Flame 40 (1981) 71-79
3. 2) powders by a dry route. Mater. Sci. Eng. B 132 (2006) 229-238
4. Mukasyan A.S., Epstein P., and Dinka P. Solution combustion synthesis of nanomaterials. Proc. Combust. Inst. 31 (2007) 1789-1795
5. Tyagi A.K., Chavan S.V., and Purohit R.D. A visit to the fascinating world of nano-ceramics powders via solution-combustion. Ind. J. Pure Appl. Phys. 44 (2006) 113-118
6. Chen W., Li F., and Yu J. A facile and novel route to high surface area ceria-based nanopowders by salt-assisted solution combustion synthesis. Mater. Lett. 60 (2006) 57-62
7. Bedekar V., Grover V., Nair S., Purohit R.D., and Tyagi A.K. Nanocrystalline electroceramics by combustion method. Synth. React. Inorg. Met.-Org. Nano-Met. Chem. 37 (2007) 321-326
8. 3 perovskite-type complex oxides. Scr. Mater. 50 (2004) 165-170
9. 2.85 perovskite using a citric acid assisted Pechini-type method. J. Alloys Compd. 398 (2005) 48-54
10. Palmisano P., Russo N., Fino P., Fino D., and Badini C. High catalytic activity of SCS-synthesized ceria towards diesel soot combustion. Appl. Catal. B: Environ. 69 (2006) 85-92
11. 3n+1-δ (n = 2, 3). J. Mater. Chem. 7 (1997) 2107-2111
12. Marinsek M., Zupan K., and Maèek J. Ni-YSZ cermet anodes prepared by citrate/nitrate combustion synthesis. J. Power Sources 106 (2002) 178-188
13. 3 powder by autoignition technique. Mater. Lett. 57 (2002) 862-867
14. Mali A., and Ataie A. Influence of the metal nitrates to citric acid molar ratio on the combustion process and phase constitution of barium hexaferrite particles prepared by sol-gel combustion method. Ceram. Int. 30 (2004) 1979-1983
15. 2-doped alumina ceramics. J. Eur. Ceram. Soc. 25 (2005) 663-672
16. Pechini, M., US Patent, 3,330,697; 1967.
17. Epifani M., Melissano E., Pace G., and Schioppa M. Precursors for the combustion synthesis of metal oxides from the sol-gel processing of metal complexes. J. Eur. Ceram. Soc. 27 (2007) 115-123
18. Erri P., Pranda P., and Varma A. Oxidizer-fuel interactions in aqueous combustion synthesis. 1. Iron(III) nitrate-model fuels. Ind. Eng. Chem. Res. 43 (2004) 3092-3096
19. Hwang C.-C., Wu T.-Y., Wan J., and Tsai J.S. Development of a novel combustion synthesis method for synthesizing of ceramic oxide powders. Mater. Sci. Eng. B 111 (2004) 49-56
20. Li F., Hu K., Li J., Zhang D., and Chen G. Combustion synthesis of γ-lithium aluminate by using various fuels. J. Nucl. Mater. 300 (2002) 82-88
21. 2-doped Ni-Zn ferrite. Mater. Sci. Eng. B 123 (2005) 227-233
22. Mukasyan A.S., Costello C., Sherlok K.P., Lafarga D., and Varma A. Perovskite membranes by aqueous combustion synthesis: synthesis and properties. Sep. Purif. Technol. 25 (2001) 117-126
23. Hosseini Vajargah S., Madaah Hosseini H.R., and Nemati Z.A. Preparation and characterization of yttrium iron garnet (YIG) nanocrystalline powders by auto-combustion of nitrate-citrate gel. J. Alloys Compd. 430 (2007) 339-343
24. 4 spinel synthesized by a sol-gel method at low temperature. J. Power Sources 101 (2001) 86-89
25. Wu Z., Zhou W., Jin W., and Xu N. Effect of pH on synthesis and properties of perovskite oxide via a citrate process. AlChE J. 52 (2006) 769-776
26. Yue Z., Guo W., Zhou J., and Li L. Synthesis of nanocrystalline ferrites by sol-gel combustion process: the influence of pH value of solution. J. Magn. Magn. Mater. 270 (2004) 216-223
27. 4 nanocrystalline powders prepared by citrate-gel methods: synthesis, structure and magnetic properties. J. Nanopartic. Res. 8 (2006) 255-267
28. 19 powder prepared by sol-gel auto-combustion. J. Magn. Magn. Mater. 301 (2006) 383-388
29. Peng T., Liu X., Dai K., Xiao J., and Song H. Effect of acidity on the glycine-nitrate combustion synthesis of nanocrystalline alumina powder. Mater. Res. Bull. 41 (2006) 1638-1645
30. Civera A., Pavese M., Saracco G., and Specchia V. Combustion synthesis of perovskite-type catalysts for natural gas combustion. Catal. Today 83 (2003) 199-211
31. Burgos-Montes O., Moreno R., Colomer M.T., and Fariñas J.C. Influence of combustion aids on suspension combustion synthesis of mullite powders. J. Eur. Ceram. Soc. 26 (2006) 3365-3372
32. Biamino S., and Badini C. Combustion synthesis of lanthanum chromite starting from water solutions: investigation of process mechanism by DTA-TGA-MS. J. Eur. Ceram. Soc. 24 (2004) 3021-3024
33. Chen W., Li F., Yu J., and Liu L. A facile and novel route to high surface area ceria-based nanopowders by salt-assisted solution combustion synthesis. Mater. Sci. Eng. B 133 (2006) 151-156
34. Chandramouli V., Anthonysamy S., and Vasudeva Rao P.R. Combustion synthesis of thoria-a feasibility study. J. Nucl. Mater 265 (1999) 255-261
35. 3. Part I. Synthesis and properties of the ignition products. J. Eur. Ceram. Soc. 20 (2000) 707-713
36. 2 electrolyte prepared by citrate-nitrate autocombustion. J. Electrochem. Soc. 154 (2007) A89-A96
37. Deganello F., Liotta L.F., Longo A., Casaletto M.P., and Scopelliti M. Cerium effect on the phase structure, phase stability and redox properties of Ce-doped strontium ferrates. J. Solid State Chem. 179 (2006) 3406-3419
38. Longo A., Giannici F., Balerna A., Ingrao C., Deganello F., and Martorana A. Local environment of yttrium in Y-doped barium cerate compounds. Chem. Mater. 18 (2006) 5782-5788
39. 3-δ ceramic protonic conductors. Solid State Ionics 178 (2007) 587-591
40. 3: their dependence on Y concentration and hydrogen doping. Solid State Ionics 138 (2000) 63-77
41. 3 SOFC. Solid State Ionics 178 (2007) 627-634
42. McCusker L.B., Von Dreele R.B., Coxd D.E., Louer D., and Scardi P. Rietveld refinement guidelines. J. Appl. Cryst. 32 (1999) 36-50
43. Larson A.C., and Von Dreele R.B. GSAS General Structure Analysis System, LANSCE, MS-H 805 (1998), Los Alamos National Laboratory, Los Alamos, NM 87545, USA
44. Brunauer S., Emmett P.H., and Teller E. Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 60 (1938) 309-319
45. Barret E.P., Joyner L.G., and Halenda P.P. The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms. J. Am. Chem. Soc. 73 (1951) 373-380
46. Hwang C.-C., and Wu T.-Y. Synthesis and characterization of nanocrystalline ZnO powders by a novel combustion synthesis method. Mater. Sci. Eng. B 111 (2004) 197-206
47. 3 cathode by gel combustion. Mater. Lett. 60 (2006) 261-265
48. Smith R.M., and Martell A.E. Critical Stability Constants 2 (1975), Plenum Press, New York
49. Chick L.A., Maupin G.D., and Pederson L.R. Glycine-nitrate synthesis of a ceramic-metal composite. Nanostruct. Mater. 4 (1994) 603-615
50. 3. Nanostruct. Mater. 7 (1996) 487-496
51. Jung C.-H., Jalota S., and Bhaduri S.B. Quantitative effects of fuel on the synthesis of Ni/NiO particles using a microwave-induced solution combustion synthesis in air atmosphere. Mater. Lett. 59 (2005) 2426-2432
52. Petrov A.N., Kononchuk O.F., Andreev A.V., Cherepanov V.A., and Kofstad P. Solid State Ionics 80 (1995) 189-199
53. Singh K.A., Pathak L.C., and Roy S.K. Effect of citric acid on the synthesis of nano-crystalline yttria stabilized zirconia powders by nitrate-citrate process. Ceram. Int. 33 (2007) 1463-1468
54. Li J., Pan Y., Qiu F., Wu Y., and Guo J. Nanostructured Nd:YAG powders via gel combustion: the influence of citrate-to-nitrate ratio. Ceram. Int. 34 (2008) 141-149
55. 4 powder synthesized by a sol-gel autocombustion method. Phys. Met. Metallogr. 102 (2006) S21-S23
56. 1.9 powders prepared by citric acid-nitrate low-temperature combustion process. J. Power Sources 163 (2006) 409-414
57. Zhang J., and Gao L. Antimony-doped tin oxide nanocrystallites prepared by a combustion process. Mater. Lett. 58 (2004) 2730-2734
58. 2 compound powders through combustion of citrate/nitrate gel. Mater. Lett. 58 (2004) 1183-1188
59. 3 produced by solution combustion synthesis. J. Eur. Ceram. Soc. 26 (2006) 1213-1220
60. Purohit R.D., Saha S., and Tyagi A.K. Nanocrystalline ceria powders through citrate-nitrate combustion. J. Nanosci. Nanotechnol. 6 (2006) 209-214
61. Chen F., Sørensen O.T., Meng G., and Peng D. Preparation of Nd-doped barium cerate through different routes. Solid State Ionics 100 (1997) 63-72
62. 3 powders by combustion of poly(ethylene glycol)-metal nitrate gel precursors. J. Mater. Sci. 32 (1997) 57-65
63. Gostovic D., Smith J.R., Kundinger D.P., Jones K.S., and Wachsman E.D. Three-dimensional reconstruction of porous LSCF cathodes. Electrochem. Solid State Lett. 10 (2007) B214-B217