Determination of the heat transfer coefficient at metal-die interface of high pressure die casting process of AM50 alloy

International Journal of Heat and Mass Transfer

Volumn 51, Issue 25-26, 2008, Pages 6032-6038

  Zhi peng, Guo ^a   Shou mei, Xiong ^a   Bai cheng, Liu ^a   Li, Mei ^b   Allison, John ^b  

^a TSINGHUA UNIVERSITY   (China)

^b FORD MOTOR COMPANY   (United States)

Author keywords

AM50 alloy; High pressure die casting; Interfacial heat transfer coefficient; Process parameters

Indexed keywords

ALLOYS; CERIUM ALLOYS; DIE CASTINGS; DIES; HEAT EXCHANGERS; HEAT TRANSFER; HEAT TRANSFER COEFFICIENTS; HEATING EQUIPMENT; MAGNESIUM; MAGNESIUM ALLOYS; MAGNESIUM CASTINGS; MAGNESIUM PRINTING PLATES; METAL CASTING; METAL CASTINGS; TEMPERATURE MEASUREMENT; THERMOANALYSIS;

AM50 ALLOY; AM50 ALLOYS; CASTING PRESSURES; DIE SURFACES; H13 STEELS; HIGH PRESSURE DIE CASTING; HIGH PRESSURE DIE CASTING PROCESSES; HIGH PRESSURE DIE CASTINGS; INTERFACIAL HEAT TRANSFER COEFFICIENT; INTERFACIAL HEAT TRANSFER COEFFICIENTS; INVERSE APPROACHES; MAGNESIUM ALLOY AM50; PEAK VALUES; PROCESS PARAMETERS;

DIE CASTING;

EID: 55749103922     PISSN: 00179310     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatmasstransfer.2008.04.029     Document Type: Article

References (33)

1. Hu H., and Yu A. Numerical simulation of squeeze cast magnesium alloy AZ91D. Modell. Simul. Mater. Sci. Eng. 10 1 (2002) 1-11
2. Ho K., and Pehlke R.D. Metal-mold interfacial heat transfer. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 16B 3 (1985) 585-594
3. Ho K., and Pehlke R.D. In: AFS (Ed). Transactions of the American Foundrymen's Society, Proceedings of the Eighty-Seventh Annual Meeting (1983), AFS, Des Plaines, Rosemont, IL 689-698
4. Nishida Y., Droste W., and Engler S. Air-gap formation process at the casting-mold interface and the heat transfer mechanism through the gap. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 17B 4 (1986) 833-844
5. Sharma D.G.R., and Krishnan M. In: AFS (Ed). Proceedings of the 95th Annual Meeting of the Transactions of the American Foundrymen's Society (1991), American Foundrymen's Society, Des Plaines, Chicago, IL 429-433
6. Krishnan M., and Sharma D.G.R. Determination of the interfacial heat transfer coefficient h in unidirectional heat flow by Beck's non linear estimation procedure. Int. Commun. Heat Mass Transfer 23 2 (1996) 203-214
7. Lewis R.W., and Ransing R.S. Correlation to describe interfacial heat transfer during solidification simulation and its use in the optimal feeding design of castings. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 29 2 (1998) 437-448
8. Lau F., Lee W.B., Xiong S.M., and Liu B.C. Study of the interfacial heat transfer between an iron casting and a metallic mould. J. Mater. Process. Technol. 79 1-3 (1998) 25-29
9. Griffiths W.D. Heat-transfer coefficient during the unidirectional solidification of an Al-Si alloy casting. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 30 3 (1999) 473-482
10. Griffiths W.D. Model of the interfacial heat-transfer coefficient during unidirectional solidification of an aluminum alloy. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 31 2 (2000) 285-295
11. Broucaret S., Michrafy A., and Dour G. Heat transfer and thermo-mechanical stresses in a gravity casting die Influence of process parameters. J. Mater. Process. Technol. 110 2 (2001) 211-217
12. Santos C.A., Quaresma J.M.V., and Garcia A. Determination of transient interfacial heat transfer coefficients in chill mold castings. J. Alloys Compd. 319 1-2 (2001) 174-186
13. Guthrie R.I.L., Isac M., Kim J.S., and Tavares R.P. Measurements, simulations, and analyses of instantaneous heat fluxes from solidifying steels to the surfaces of twin roll casters and of aluminum to plasma-coated metal substrates. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 31 5 (2000) 1031-1047
14. Wang G.X., and Matthys E.F. Experimental determination of the interfacial heat transfer during cooling and solidification of molten metal droplets impacting on a metallic substrate: Effect of roughness and superheat. Int. J. Heat Mass Transfer 45 25 (2002) 4967-4981
15. Hallam C.P., and Griffiths W.D. A model of the interfacial heat-transfer coefficient for the aluminum gravity die-casting process. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 35 4 (2004) 721-733
16. Jayanti S., and Valette M. Prediction of dryout and post-dryout heat transfer at high pressures using a one-dimensional three-fluid model. Int. J. Heat Mass Transfer 47 22 (2004) 4895-4910
17. Hines J.A. Determination of interfacial heat-transfer boundary conditions in an aluminum low-pressure permanent mold test casting. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 35 2 (2004) 299-311
18. Sabau A.S. In: TMS (Ed). TMS Light Metals (2006), Minerals, Metals and Materials Society, San Antonio, TX 827-832
19. Kumar G., Hegde S., and Prabhu K.N. Heat transfer and solidification behaviour of modified A357 alloy. J. Mater. Process. Technol. 182 1-3 (2007) 152-156
20. Kumar T.S.P., and Prabhu K.N. Heat flux transients at the casting/chill interface during solidification of aluminum base alloys. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 22 5 (1991) 717-727
21. Coates B., and Argyropoulos S.A. The effects of surface roughness and metal temperature on the heat-transfer coefficient at the metal mold interface. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 38 2 (2007) 243-255
22. Dour G., Dargusch M., and Davidson C. Recommendations and guidelines for the performance of accurate heat transfer measurements in rapid forming processes. Int. J. Heat Mass Transfer 49 11-12 (2006) 1773-1789
23. Dour G., Dargusch M., Davidson C., and Nef A. Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting: Effect of the process parameters. J. Mater. Process. Technol. 169 2 (2005) 223-233
24. Nelson C.W. In: SDCE (Ed). Transactions of 6th International Die Casting Congress & Exhibition (1970), SDCE, Cleveland, OH 1-8
25. Hong S., Backman D.G., and Mehrabian R. Heat transfer coefficient in aluminum alloy die casting. Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci. 10B 2 (1979) 299-301
26. Papai J., and Mobley C. In: NADCA (Ed). Transactions of the NADCA Congress (1991), NADCA, Detroit, MI 377-384
27. Beck J.V. Sequential estimation of thermal parameters. J. Heat Transfer 99 2 (1977) 314-321
28. Hamasaiid A., Dour G., Dargusch M., Loulou T., Davidson C., and Savage G. In: Gandin C.-A., and Bellet M. (Eds). Modeling of Casting, Welding and Advanced Solidification Processes - XI (2006), Minerals, Metals and Materials Society, Opio, France 1205-1212
29. Guo Z., Xiong S., Cho S.-H., and Choi J.-K. Development of an inverse heat transfer model and its application in the prediction of the interfacial heat flux. Jinshu Xuebao/Acta Metall. Sin. 43 6 (2007) 607-611
30. Michalski L., Echersdort K., and McGhee J. Temperature Measurement (1991), Wiley, New York pp. 279-290
31. Beck J.V., Blackwell B., and Clair C.R.S. Inverse Heat Conduction: Ill-Posed Problems (1985), Wiley, New York pp. 125-134
32. Beck J.V., Blackwell B., and Haji-Sheikh A. Comparison of some inverse heat conduction methods using experimental data. Int. J. Heat Mass Transfer 39 17 (1996) 3649-3657
33. Helenius R., Lohne O., Arnberg L., and Laukli H.I. The heat transfer during filling of a high-pressure die-casting shot sleeve. Mater. Sci. Eng. A 413 SI (2005) 52-55