Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting: Effect of the process parameters

Journal of Materials Processing Technology

Volumn 169, Issue 2, 2005, Pages 223-233

  Dour, G ^a   Dargusch, M ^b   Davidson, C ^b,c   Nef, A ^d  

^a ECOLE DES MINES D ALBI CARMAUX   (France)

^b UNIVERSITY OF QUEENSLAND   (Australia)

^c CSIRO   (Australia)

^d Ferra Engineering Pty Ltd   (Australia)

Author keywords

Die casting; Heat flux density; Heat transfer; Heat transfer coefficient; High pressure die casting; Instrumented die

Indexed keywords

DIE CASTING; FIBER OPTICS; HEAT FLUX; HIGH PRESSURE EFFECTS; PISTONS; PYROMETERS; THERMOCOUPLES; VELOCITY MEASUREMENT;

HEAT FLUX DENSITY; HEAT TRANSFER COEFFICIENT; HIGH PRESSURE DIE CASTING; INSTRUMENTED DIE;

HEAT TRANSFER;

EID: 26444602998     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2005.03.026     Document Type: Article

References (26)

1. S. Broucaret, A. Michrafy, and G. Dour Heat Transfer and thermo-mechanical stresses in a gravity die - influence of process parameters J. Mater. Process. Technol. 110 2001 211 217
2. V. Davies Heat transfer in gravity die castings Br. Foundryman 73 12 1980 331 334
3. T. Evans, and L. Strezov Interfacial heat transfer and nucleation of steel on metallic substrates Metall. Mater. Trans. B 31B 2000 1081 1089
4. W.D. Griffiths The heat transfer coefficient during the unidirectional solidification of an Al-Si alloy casting Metall. Mater. Trans. B 30B 1999 473 482
5. R.I.L. Guthrie Measurements, simulations and analyses of instantaneous heat fluxes from solidifying steels to the surfaces of twin roll casters and of aluminium to plasma-coated metal substrates Metall. Mater. Trans. B 31B 2000 1031 1046
6. C.P. Hallam, W.D. Griffiths, and N.D. Butler Interfacial heat transfer between a solidifying aluminium alloy and a coated die steel Mater. Sci. Forum 329 330 2000 467 472
7. Y. Hatamura, Direct measurement of metal pressure and die surface temperature. World of Die Casting: 1989. North American Die Casting Association, 1989.
8. S. Hong, D.G. Backman, and R. Mehrabian Heat transfer coefficient in aluminium alloy die casting Metall. Trans. B 10B 2 1979 299 301
9. J.H. Hu, E.R.G. Eckert, and R.J. Goldstein Numerical simulation of flows, heat transfer and solidification in pressure die casting 28th National Conference and Exhibition San Diego, CA, USA: ASME, NY, USA 1992
10. M.Z. Jahedi, and M. Giannos A new die coat for low pressure and gravity die casting Mater. Aust. 33 2 2000 20 22
11. L.R. Jia Numerical simulation of fluid flow and heat transfer during mold filling for die casting Qinghua Daxue Xuebao J. Tsinghua University 41 2 2001 8 11
12. T. Loulou, Etude expérimentale de l'evolution des conditions thermiques de contact lors de la solidification d'un métal tombant sur une paroi métallique refroidie, in Lab. de Thermocinétique, ISITEM, Université de Nantes (France), Nantes, p. 194, 1995.
13. J. Papai, C. Mobley, Die thermal fields and heat fluxes during die casting of 380 aluminium alloy in H13 steel dies, World of Die Casting: 1991, North American Die Casting Association, 1991.
14. P. Schmidt Heat Transfer in Permanent Mould Casting 1994 Royal Institute of Technology Stockholm
15. G. Sciama, and J.F. Ribou Solidification de barreaux en AlSi7Mg coulés contre refroidisseurs Fondeur et Fonderie d'Aujourd'hui 169 1997 23 61
16. S. Takemoto, H. Takeuchi, and T. Suzuki Measurement of heat transfer coefficient between molten Al-4.5%Cu alloy and chill blocks by melt drop method J. Jpn. Inst. Light Met. 38 1 1988 16 21
17. V. Venkatasamy NADCA sponsored research: die cavity sensors for monitoring die casting processes World of Die Casting: 1997 1997 North American Die Casting Association Minneapolis
18. K.A. Woodbury Effect of thermocouple sensor dynamics on surface heat flux predictions obtained via inverse heat transfer analysis Int. J. Heat Mass Transfer 33 12 1990 2641 2649
19. G. Dour, M. Dargusch, C. Davidson, Theoretical approach for the conception of a heat transfer gauge, application to high pressure die casting, Int. J. Heat Mass Transfer, in press.
20. G. Dour, M. Dargusch, C. Davidson, Developments relating to measurements of temperatures and heat transfer coefficients, Patent application No. 20,029,553,328. 2002: Australia.
21. G. Dour, M. Dargusch, and C. Davidson Non intrusive heat transfer coefficient gauge for aluminium high pressure die casting 2002 CAST for Metals Manufacturing Brisbane
22. S. Krishnan Spectral emissivities and optical properties of liquid silicon, aluminium, titanium and niobium at 632.8 nm High Temp. Sci. 30 1991 137 153
23. A. Antoni-Zdziobeck Incorporation D'éléments Réfractaires Dans Les Alliages À Base de Niobium, in EPM-MADYLAM 1992 Institut Naional Polytectnique de Grenoble Grenoble
24. A. Nahed On the influence of process variables on the thermal conditions and properties of high pressure die-cast magnesium alloys J. Mater. Process. Technol. 73 1998 125 138
25. G.X. Wang, and E.F. Matthys Experimental determination of the interfacial heat transfer during cooling and solidification of molten metal droplets impacting on a metallic substrate: effect of roughness and superheat Int. J. Heat Mass Transfer 45 2002 4967 4981
26. M.N. Özisik Heat Conduction second ed. 1993 John Wiley & Sons