HVOF-sprayed WC-Co as hard interlayer for DLC films

Surface and Coatings Technology

Volumn 203, Issue 5-7, 2008, Pages 699-703

  Bolelli, G ^a   Lusvarghi, L ^a   Montecchi, M ^a   Mantini, F Pighetti ^a   Pitacco, F ^b   Volz, H ^b   Barletta, M ^c  

^a UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

^b Protec Surface Technologies Srl   (Italy)

^c UNIVERSITY OF ROME TOR VERGATA   (Italy)

Author keywords

Ball on disk test; Electron Cyclotron Resonance Chemical Vapour Deposition (ECR CVD); High Velocity Oxygen Fuel Spraying (HVOF); Nano indentation; Scratch test

Indexed keywords

CHEMICAL VAPOR DEPOSITION; CYCLOTRONS; DELAMINATION; DISKS (STRUCTURAL COMPONENTS); ELECTRIC LOAD MANAGEMENT; ELECTRON CYCLOTRON RESONANCE; HARDNESS; NANOINDENTATION; OXYGEN; PESTICIDES; STEEL; STEEL SHEET; SUBSTRATES; TESTING; THICK FILMS; TRIBOLOGY;

BALL-ON-DISK TEST; CHEMICAL COMPOSITIONS; CONTACT PRESSURES; CRITICAL LOADS; DLC FILMS; DLC THIN FILMS; DRY SLIDING; HIGH VELOCITY OXYGEN-FUEL SPRAYING (HVOF); INTER-LAYERS; LOW HARDNESSES; NANO INDENTATIONS; ROOM TEMPERATURES; SCRATCH TEST; SLIDING DISTANCES; STEEL SUBSTRATES; TECHNICAL IMPROVEMENTS; TRIBOLOGICAL PERFORMANCES; TRIBOLOGICAL TESTS; XPS ANALYSES;

COBALT;

EID: 55749093967     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.surfcoat.2008.08.014     Document Type: Article

References (28)

1. Wheeler D.W. In: Mellor B.G. (Ed). Surface Coatings for Protection against Wear (2006), Woodhead Publishing Limited, Abington Hall, Cambridge, England 129-132
2. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S., and Koskinen J. Surf. Coat. Technol. 200 (2006) 3810
3. Podgornik B., and Vižintin J. Diamond Relat. Mater. 10 (2001) 2232
4. Liu Y., and Meletis E.I. Surf. Coat. Technol. 153 (2002) 178
5. Gadow R., and Scherer D. Surf. Coat. Technol. 151-152 (2002) 471
6. Casadei F., Pileggi R., Valle R., and Matthews A. Surf. Coat. Technol. 201 (2006) 1200
7. Bemporad E., Sebastiani M., De Felicis D., Carassiti F., Valle R., and Casadei F. Thin Solid Films 515 (2006) 186
8. Liu X., Chu P.K., and Ding C. Mater. Sci. Eng. R 47 (2004) 49
9. Vetter J., Barbezat G., Crummenauer J., and Avissar J. Surf. Coat. Technol. 200 (2005) 1962
10. Henne R. J. Therm. Spray Technol. 16 (2007) 381
11. DeMasi-Marcin J.T., and Gupta D.K. Surf. Coat. Technol. 68-69 (1994) 1
12. Heimann R.B. Key Eng. Mater. 122-124 (1996) 399
13. Longo F.N. In: Davis J.R. (Ed). Handbook of Thermal Spray Technology (2004), ASM International, Materials Park, OH, USA 105-107
14. Chivavibul P., Watanabe M., Kuroda S., and Shinoda K. Surf. Coat. Technol. 202 (2007) 509
15. Bolelli G., Cannillo V., Lusvarghi L., and Riccò S. Surf. Coat. Technol. 200 (2006) 2995
16. Oliver W.C., and Pharr G.M. J. Mater. Res. 7 (1992) 1564
17. Bull S.J. Surf. Coat. Technol. 50 (1991) 25
18. Lascovich J.C., Giorgi R., and Scaglione S. Appl. Surf. Sci. 47 (1991) 17
19. Burnett P.J., and Rickerby D.S. Thin Solid Films 148 (1987) 41
20. Lesage J., Pertuz A., Puchi-Cabrera E.S., and Chicot D. Thin Solid Films 497 (2006) 232
21. Korsunsky A.M., McGurk M.R., Bull S.J., and Page T.F. Surf. Coat. Technol. 99 (1998) 171
22. Lau K.H., Li K.Y., and Mai Y.-W. Int. J. Surf. Sci. Eng. 1 (2007) 3
23. Chai H., and Lawn B.R. J. Mater. Res. 19 (2004) 1752
24. Westbrook J.H. ASM Trans. 45 (1953) 221
25. Milman Yu.V., Luyckx S., and Northrop I.T. Int. J. Refract. Met. Hard Mater. 17 (1999) 39
26. Robertson J. Mater. Sci. Eng. R 37 (2002) 129
27. Voevodin A.A., Phelps A.W., Zabinski J.S., and Donley M.S. Diamond Relat. Mater. 5 (1996) 1264
28. Grill A. Surf. Coat. Technol. 94-95 (1997) 507