Interface correlation and toughness matching of phosphoric acid functionalized Kevlar fiber and epoxy matrix for filament winding composites

Composites Science and Technology

Volumn 68, Issue 15-16, 2008, Pages 3208-3214

  Li, Gang ^a   Zhang, Chen ^a   Wang, Yang ^a   Li, Peng ^a   Yu, Yunhua ^a   Jia, Xiaolong ^a   Liu, Haiyang ^a   Yang, Xiaoping ^a   Xue, Zhongmin ^b   Ryu, Seungkon ^c  

^a BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY   (China)

^b Beijing FRP Research and Design Institute   (China)

^c Chungnam National University   (South Korea)

Author keywords

A. Aramid fibre; A. Polymer matrix composites (PMCS); B. Interface; B. Interfacial strength; D. Photoelectron spectroscopy (XPS)

Indexed keywords

ABS RESINS; ACIDS; ADHESION; CARBON FIBER REINFORCED PLASTICS; EPOXY RESINS; FIBERS; FILAMENT WINDING; FUNCTIONAL GROUPS; FUNCTIONAL POLYMERS; MECHANICAL PROPERTIES; METALLIC MATRIX COMPOSITES; MILITARY EQUIPMENT; ORDNANCE; OXYGEN; PHOSPHORIC ACID; PHOTOELECTRON SPECTROSCOPY; POLYMER MATRIX COMPOSITES; RESINS; STRENGTH OF MATERIALS; SURFACE ROUGHNESS; TOUGHNESS;

A. ARAMID FIBRE; A. POLYMER-MATRIX COMPOSITES (PMCS); B. INTERFACE; B. INTERFACIAL STRENGTH; D. PHOTOELECTRON SPECTROSCOPY (XPS);

SHEAR STRENGTH;

FIBER REINFORCED COMPOSITE; FILAMENT; MECHANICAL PROPERTY; SHEAR PROPERTY; STRENGTH; TENSILE PROPERTY; TOUGHNESS; WINDING;

EID: 55649106783     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2008.08.006     Document Type: Article

References (30)

1. Yue C.Y., and Padmanabhan K. Interfacial studies on surface modified Kevlar fibre/epoxy matrix composites. Composites Part B 30 (1999) 205-217
2. Yue C.Y., Sui G.X., and Looi H.C. Effects of heat treatment on the mechanical properties of Kevlar-29 fiber. Compos Sci Technol 60 (2000) 421-427
3. Anton J.J.S., Pradas M.M., and Ribelles J.L.G. The effect of Kevlar fiber reinforcement on the curing, thermal, and dynamic-mechanical properties of epoxy/anhydride system. Polym Eng Sci 40 (2000) 1725-1735
4. Lee S.P., Chian K.S., and Mullarky R.H. Effects of bromination and hydrolysis treatments on the morphology and tensile properties of Kevlar-29 fibers. J Mater Sci Lett 13 (1994) 305-309
5. Wu S.R., Sheu C.S., and Shyu S.S. Kevlar fiber-epoxy adhesion and its effect on composite mechanical and fracture properties by plasma and chemical treatment. J Appl Polym Sci 62 (1996) 1347-1360
6. Rebouillat S., Peng J.C.M., and Dommet J.B. Surface structure of Kevlar fiber studied by atomic force microscopy and inverse gas chromatography. Polymer 40 (1999) 7341-7350
7. Lin T.K., Wu S.J., Lai J.G., and Shyu S.S. The Effect of chemical treatment on reinforcement/matrix interaction in Kevlar-fiber/bismaleimide composites. Compos Sci Technol 60 (2000) 1873-1878
8. Park J.M., Kim D.S., and Kim S.R. Improvement of interfacial adhesion and nondestructive damage evaluation for plasma-treated PBO and Kevlar fibers/epoxy composites using micromechanical techniques and surface wettability. J Colloid Interface Sci 264 (2003) 431-445
9. Kim E.Y., An S.K., and Kim H.D. Graft copolymerization of ε-caprolactam onto Kevlar-49 fiber surface and properties of grafted Kevlar fiber reinforced composite. J Appl Polym Sci 65 (1997) 99-107
10. Inagaki N., Tasaka S., Kawai H., and Yamada Y. Surface modification of aromatic polyamide film by remote oxygen plasma. J Appl Polym Sci 64 (1997) 831-840
11. Breznick M., Banbaji J., and Baklagina Y.G. Surface treatment technique for aramid fibres. Polym Commun 28 (1987) 55-60
12. Ramazan B., and Tesoro C.G. Effect of surface-limited reaction on the properties of Kevlar fibers. Text Res J 7 (1990) 334-344
13. Wu Z., Pittman Jr. C.U., and Gardner S.D. Nitric acid oxidation of carbon fibers and the effects of subsequent treatment in refluxing aqueous NaOH. Carbon 33 (1995) 597-605
14. Pamula E., and Rouxhet P.G. Bulk and surface chemical functionalities of type III PAN-based carbon fibres. Carbon 41 (2003) 1905-1915
15. Park S.J., Seo M.K., Ma T.J., and Lee D.R. Effect of chemical treatment of Kevlar fibers on mechanical interfacial properties of composites. J Colloid Interface Sci 252 (2002) 249-255
16. Saikrasun S., Amornsakchai T., Sirisinha C., Meesiri W., and Bualek-limcharoen S. Kevlar reinforcement of polyolefin-based thermoplastic elastomer. Polymer 40 (1999) 6437-6442
17. Urbaczewski-Espuche E., and Gerard J.F. Toughness improvement of an epoxy/anhydride matrix: influence on processing and fatigue properties of unidirectional glass-fiber composites. J Appl Polym Sci 47 (1993) 991-1002
18. Chen W., Yu Y., Li P., Wang C., Zhou T., and Yang X. Effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites. Compos Sci Technol 67 (2007) 2261-2270
19. Morgan R.J. Structure-property relations of epoxies used as composite matrices. Epoxy resins and composites I vol. 72 (1985), Springer, Berlin/Heidelberg
20. Morgan R.J., and Walkup C.M. Epoxy matrices for filament-wound carbon fiber composites. J Appl Polym Sci 34 (1987) 37-46
21. Park S., Kim M., Lee J., and Choi S. Effect of fiber-polymer interactions on fracture toughness behavior of carbon fiber-reinforced epoxy matrix composite. J Colloid Interface Sci 228 (2000) 287-291
22. DeCarli M., Kozielski K., Tian W., and Varley R. Toughening of a carbon fiber reinforced epoxy anhydride composite using an epoxy terminated hyperbranched modifier. Compos Sci Technol 65 (2005) 2156-2166
23. Zhang J.S., Karbhari V.M., Wu L., and Reynaud D. Field exposure based durability assessment of FRP column wrap systems. Composites Part B 34 (2003) 41-50
24. 2 activation of Kevlar flocks. Carbon 35 (1997) 967-976
25. Montes-Moran M.A., Paredes J.I., Martinez-Alosno A., and Tascon J.M.D. Surface characterization of PPTA fibers using inverse gas chromatography. Macromolecules 35 (2002) 5085-5096
26. Ren Y., Wang C., and Qiu Y. Influence of aramid fiber moisture regain during atmospheric plasma treatment on aging of treatment effects on surface wettability and bonding strength to epoxy. Appl Surf Sci 253 (2007) 9283-9289
27. Mosquera M.E.G., Jamond M., Martinez-Alosno A., and Tascon J.M.D. Thermal transformation of Kevlar aramid fiber during pyrolysis: infrared and thermal analysis studies. Chem Mater 6 (1994) 1918-1924
28. Wang C., Li P., Yu Y., and Yang X. UHMWPE fibers with surface treatment and its composites properties. Acta Mater Compos Sinica 2 (2006) 30-34
29. Varelidis P.C., Papakostopoulos D.G., Pandazis C.I., and Papaspyrides C.D. Polyamide coated Kevlar fiber in epoxy resin: mechanical properties and moisture absorption studies. Composites Part A 31 (2000) 549-558
30. Kalantar J., and Drzal L.T. The bonding mechanism of aramid fibers to epoxy matrices. J Mater Sci 25 (1990) 4186-4202