Marginal accuracy of combined tooth-implant-supported fixed dental prostheses after in vitro stress simulation

Clinical Oral Implants Research

Volumn 19, Issue 12, 2008, Pages 1261-1269

  Boeckler, Arne F ^a   Morton, Dean ^b   Kraemer, Stephan ^a   Geiss Gerstdorfer, Juergen ^c   Setz, Juergen M ^a  

^a MARTIN LUTHER UNIVERSITY HALLE WITTENBERG   (Germany)

^b UNIVERSITY OF FLORIDA   (United States)

^c UNIVERSITY HOSPITAL TÜBINGEN   (Germany)

Author keywords

Abutment teeth; Cement; Implant; Marginal gap; Tooth implant supported FDPs

Indexed keywords

GLASS IONOMER; RESIN CEMENT; TOOTH CEMENT; ZINC PHOSPHATE;

ARTICLE; COMPARATIVE STUDY; DENTAL CARE; DENTAL SURGERY; DENTURE; ENDODONTICS; HUMAN; NONPARAMETRIC TEST; PREMOLAR TOOTH; PROSTHESIS; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

BICUSPID; DENTAL ABUTMENTS; DENTAL CEMENTS; DENTAL IMPLANTS; DENTAL MODELS; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTURE RETENTION; DENTURE, PARTIAL, FIXED; GLASS IONOMER CEMENTS; HUMANS; MARGINAL ADAPTATION (DENTISTRY); PROSTHESIS FITTING; RESIN CEMENTS; STATISTICS, NONPARAMETRIC; ZINC PHOSPHATE CEMENT;

EID: 55649101680     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2008.01593.x     Document Type: Article

References (51)

1. Akpinar, I., Demirel, F., Parnas, L. Sahin, S. (1996) A comparison of stress and strain distribution characteristics of two different rigid implant designs for distal-extension fixed prostheses. Quintessence International 27 : 11 17.
2. Assif, D., Marshak, B. Schmidt, A. (1996) Accuracy of implant impression techniques. International Journal of Oral & Maxillofacial Implants 11 : 216 222.
3. Behr, M., Rosentritt, M., Latzel, D. Kreisler, T. (2001) Comparison of three types of fiber-reinforced composite molar crowns on their fracture resistance and marginal adaptation. Journal of Dentistry 29 : 187 196.
4. Behr, M., Rosentritt, M., Mangelkramer, M. Handel, G. (2003) The influence of different cements on the fracture resistance and marginal adaptation of all-ceramic and fiber-reinforced crowns. International Journal of Prosthodontics 16 : 538 542.
5. Belser, U.C., MacEntee, M.I. Richter, W.A. (1985) Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study. Journal of Prosthetic Dentistry 53 : 24 29.
6. Beschnidt, S.M. Strub, J.R. (1999) Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. Journal of Oral Rehabilitation 26 : 582 593.
7. Block, M.S., Lirette, D., Gardiner, D., Li, L., Finger, I.M., Hochstedler, J., Evans, G., Kent, J.N., Misiek, D.J., Mendez, A.J., Guerra, L., Larsen, H., Wood, W. Worthington, P. (2002) Prospective evaluation of implants connected to teeth. International Journal of Oral & Maxillofacial Implants 17 : 473 487.
8. Brägger, U., Aeschlimann, S., Burgin, W., Hammerle, C.H. Lang, N.P. (2001) Biological and technical complications and failures with fixed partial dentures on implants and teeth after four to five years of function. Clinical Oral Implants Research 12 : 26 34.
9. Chee, W.W. Cho, G.C. (1997) A rationale for not connecting implants to natural teeth. Journal of Prosthodontics 6 : 7 10.
10. Christensen, G. (1966) Marginal fit of gold inlay castings. Journal of Prosthetic Dentistry 16 : 297 305.
11. Clayton, G.H., Driscoll, C.F. Hondrum, S.O. (1997) The effect of luting agents on the retention and marginal adaptation of the CeraOne Implant System. International Journal of Oral & Maxillofacial Implants 12 : 660 665.
12. Dreyer-Jørgensen, K. (1960) Factors affecting the film thickness of zinc phosphate cements. Acta Odontologica Scandinavica 18 : 479 490.
13. Ehrenberg, D.S. Weiner, S. (2000) Changes in marginal gap size of provisional resin crowns after occlusal loading and thermal cycling. Journal of Prosthetic Dentistry 84 : 139 148.
14. Felton, D., Kanoy, B., Bayne, S. Wirthman, G. (1991) Effect of in vivo crown margin discrepancies on periodontal health. Journal of Prosthetic Dentistry 65 : 357 364.
15. Fransson, B., Øilo, G. Gjeitanger, R. (1985) The fit of metal-ceramic crowns, a clinical study. Dental Materials 1 : 197 199.
16. Garcia, L.T. Oesterle, L.J. (1998) Natural tooth intrusion phenomenon with implants: a survey. International Journal of Oral & Maxillofacial Implants 13 : 227 231.
17. Groten, M., Axmann, D., Pröbster, L. Weber, H. (2000) Determination of the minimum number of marginal gap measurements required for practical in-vitro testing. Journal of Prosthetic Dentistry 83 : 40 49.
18. Guichet, D.L., Caputo, A.A. Choi, H. (2000) Passivity of fit and marginal opening in screw- or cement-retained implant fixed partial denture designs. International Journal of Oral & Maxillofacial Implants 15 : 239 246.
19. Gunne, J., Astrand, P., Ahlen, K., Borg, K. Olsson, M. (1992) Implants in partially edentulous patients. A longitudinal study of bridges supported by both implants and natural teeth. Clinical Oral Implants Research 3 : 49 56.
20. Gunne, J., Astrand, P., Lindh, T., Borg, K. Olsson, M. (1999) Tooth-implant and implant supported fixed partial dentures: a 10-year report. International Journal of Prosthodontics 12 : 216 221.
21. Hebel, K.S. Gajjar, R.C. (1997) Cement-retained versus screw-retained implant restorations: achieving optimal occlusion and esthetics in implant dentistry. Journal of Prosthetic Dentistry 77 : 28 35.
22. Hosny, M.M., Duyck, J.A., van Steenberghe, D. Naert, I.E. (2000) Within-subject comparison between connected and nonconnected tooth-to-implant fixed partial prostheses: up to 14-year follow up study. International Journal of Prosthodontics 13 : 340 346.
23. Hung, S.H., Hung, K.S., Eick, J.D. Chappell, R.P. (1990) Marginal fit of porcelain-fused-to-metal and two types of ceramic crown. Journal of Prosthetic Dentistry 63 : 26 31.
24. Jacobs, R. van Steenberghe, D. (1993) Comparison between implant-supported prostheses and teeth regarding passive threshold level. International Journal of Oral & Maxillofacial Implants 8 : 549 554.
25. Kayacan, R., Ballarini, R. Mullen, R.L. (1997) Theoretical study of the effects of tooth and implant mobility differences on occlusal force transmission in tooth/implant-supported prostheses. Journal of Prosthetic Dentistry 78 : 677 681.
26. Keith, S.E., Miller, B.H., Woody, R.D. Higginbottom, F.L. (1999) Marginal discrepancy of screw-retained and cemented metal-ceramic crowns on implant abutments. International Journal of Oral & Maxillofacial Implants 14 : 369 378.
27. Keller, D., Hämmerle, C.H.F. Lang, N.P. (1996) Thresholds for tactile sensitivity perceived with dental implants remain unchanged during a healing phase of 3 months. Clinical Oral Implants Research 7 : 48 54.
28. Kern, M., Schaller, H. Strub, J. (1993) Marginal fit of restorations before and after cementation. International Journal of Prosthodontics 6 : 585 591.
29. Kim, W.D., Jacobson, Z. Nathanson, D. (1999) In vitro stress analysis of dental implants supporting screw-retained and cement-retained prostheses. Implant Dentistry 8 : 141 151.
30. Krejci, I., Lutz, F. Reimer, M. (1993) Marginal adaptation and fit of adhesive ceramic inlays. International Journal of Prosthodontics 21 : 39 46.
31. Krejci, I., Mueller, E. Lutz, F. (1994) Effects of thermocycling and occlusal force on adhesive composite crowns. Journal of Dental Research 73 : 1228 1232.
32. Lang, N., Kiel, R. Anderhalden, K. (1983) Clinical and microbiological effects of subgingival restorations with overhanging or clinically perfect margins. Journal of Clinical Periodontology 10 : 563 570.
33. Lang, N.P., Pjetursson, B.E., Tan, K., Brägger, U., Egger, M. Zwahlen, M. (2004) A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. II. Combined tooth-implant-supported FPDs. Clinical Oral Implants Research 15 : 643 653.
34. Li, Z.C. White, S.N. (1999) Mechanical properties of dental luting cements. Journal of Prosthetic Dentistry 81 : 597 609.
35. Lindh, T., Gunne, J., Nystrom, E. Back, T. (2001) Implant versus tooth-implant supported prostheses in the posterior maxilla: a 2-year report. Clinical Oral Implants Research 12 : 441 449.
36. McLean, J.W. von Fraunhofer, J.A. (1971) The estimation of cement film thickness by an in vivo technique. British Dental Journal 131 : 107 111.
37. Misch, C. (1995) Screw-retained versus cement-retained implant-supported prosthesis. Practical Periodontics and Aesthetic Dentistry 9 : 15 18.
38. Naert, I.E., Duyck, J.A., Hosny, M.M. van Steenberghe, D. (2001) Free-standing and tooth-implant connected prostheses in the treatment of partially edentulous patients. Part I: an up to 15-years clinical evaluation. Clinical Oral Implants Research 12 : 237 244.
39. Nishimura, R.D., Ochiai, K.T., Caputo, A.A. Jeong, C.M. (1999) Photoelastic stress analysis of load transfer to implants and natural teeth comparing rigid and semirigid connectors. Journal of Prosthetic Dentistry 81 : 696 703.
40. 4 all-ceramic crowns after chewing simulation. Journal of Oral Rehabilitation 33 : 827 832.
41. Olsson, M., Gunne, J., Astrand, P. Borg, K. (1995) Bridges supported by free-standing implants versus bridges supported by tooth and implant. A five-year prospective study. Clinical Oral Implants Research 6 : 114 121.
42. Pesun, I.J. (1997) Intrusion of teeth in the combination implant-to-natural tooth fixed partial denture: a review of the theories. Journal of Prosthodontics 6 : 268 277.
43. Pjetursson, B.E., Tan, K., Lang, N.P., Brägger, U., Egger, M. Zwahlen, M. (2004) A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. I. Implant-supported FPDs. Clinical Oral Implants Research 15 : 625 642.
44. Rieder, C.E. (1990) Copings on tooth and implants abutments for superstructure prosthesis. The International Journal of Periodontics and Restorative Dentistry 10 : 437 453.
45. Rosenstiel, S.F., Land, M.F. Crispin, B.J. (1998) Dental luting agents: a review of the current literature. Journal of Prosthetic Dentistry 80 : 280 301.
46. Schulte, W. Lukas, D. (1992) The Periotest method. International Dental Journal 42 : 433 440.
47. Sutherland, J.K., Ritsco, R.G. Budd, S.R. (1998) Marginal adaptation of implant-supported metal-ceramic crowns fabricated with gold cylinders. Journal of Prosthodontics 7 : 100 105.
48. Takeshita, F., Matsushita, Y., Ayukawa, Y. Suetsugu, T. (1996) Fractures of hydroxyapaptite-coated blade implants connected with natural teeth. A histological study using SEM, light microscopy and an image processing system. Journal of Periodontology 67 : 86 92.
49. Tan, K., Pjetursson, B.E., Lang, N.P. Chan, E.S.Y. (2004) A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. III. Conventional FPDs. Clinical Oral Implants Research 15 : 654 666.
50. Valderrama, S., van Roekel, N., Andersson, M., Goodacre, C. Munoz, C. (1995) A comparison of the marginal and internal adaptation of titanium and gold-platinum-palladium metal ceramic crowns. International Journal of Prosthodontics 8 : 29 37.
51. Weinberg, L.A. Krüger, B. (1994) Biomechanical considerations when combining tooth-supported and implant-supported prosthesis. Oral Surgery, Oral Medicine, and Oral Pathology 78 : 22 27.