Characterization and modeling of large displacement micro-/nano-lndentation of polymeric solids

Journal of Engineering Materials and Technology

Volumn 130, Issue 4, 2008, Pages 0410011-0410017

  Lu, Y C ^a   Shinozaki, D M ^b  

^a UNIVERSITY OF KENTUCKY   (United States)

^b UNIVERSITY OF WESTERN ONTARIO   (Canada)

Author keywords

Finite element; Micro indentation; Plasticity; Polymer

Indexed keywords

FINITE ELEMENT METHOD; PLASTICITY; STRAIN; STRAIN HARDENING;

FINITE ELEMENT SIMULATIONS; LARGE DISPLACEMENTS; MICRO INDENTATION; MICRO-INDENTATION TESTS; POLYMERIC SOLIDS; STRAIN HARDENING BEHAVIOR; STRESS DISPLACEMENT CURVES; STRESS-DISPLACEMENT;

POLYMERS;

EID: 54949134919     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2969250     Document Type: Article

References (30)

1. Oliver, W. C., and Pharr, G. M., 1992, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., 7, pp. 1564-1583.
2. Oliver, W. C., Hutchings, R., and Pethica, J. B., 1986, Microindentation Techniques in Materials Science and Engineering, B. J. Blau and B. R. Lawn, eds., ASTM, Philadelphia, ASTM 889 47.
3. Pharr, G. M., Harding, D. S., and Oliver, W. C., 1993, "Measurement of Fracture Toughness in Thin Films and Small Volumes Using Nanoindentation Methods," Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, M. Nastasi, D. M. Parkin, and H. Gleiter, eds., Kluwer Academic., pp. 449-461.
4. Pharr, G. M., Oliver, W. C., and Brotzen, F. R., 1992, "On The Generality of the Relationship Among Contact Stiffness, Contact Area, and Elastic Modulus During Indentation," J. Mater. Res., 7, pp. 613-617.
5. Doerner, M. F., and Nix, W. D., 1986, "A Method for Interpreting the Data From Depth-Sensing Indentation Instruments," J. Mater. Res., 1, pp. 601-609.
6. Oliver, W. C., and Pharr, G. M., 2004, "Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology," J. Mater. Res., 19, pp. 3-20.
7. Pethicai, J. B., Hutchings, R., and Oliver, W. C., 1983, "Hardness Measurements at Penetration Depths as Small as 20 nm," Philos. Mag. A, 48, pp. 593-606.
8. Sneddon, I. N., 1965, "The Relation Between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile," Int. J. Eng. Sci., 3, pp. 47-57.
9. Mouginot, R., and Maugis, D., 1985, "Fracture Indentation Beneath Flat and Spherical Punches," J. Mater. Sci., 20, pp. 4354.
10. Swain, M. V., 1998, "Mechanical Property Characterisation of Small Volumes of Brittle Materials With Spherical Tipped Indenters," Mater. Sci. Eng., A, 253, pp. 160-166.
11. Swadener, J. G., Taljat, B., and Pharr, G. M., 2001, "Measurement of Residual Stress by Load and Depth Sensing Indentation With Spherical Indenters," J. Mater. Res., 16, pp. 2091-2102.
12. Anton, R. J., Miskiohlu, I., and Subhash, G., 1999, "Determination of Residual Stress Fields Beneath a Vickers Indentation Using Photoelasticity," Exp. Mech., 39, pp. 227-230.
13. Park, Y. J., and Pharr, G. M., 2004, "Nanoindentation With Spherical Indenters: Finite Element Studies of Deformation in the Elastic-Plastic Transition Regime," Thin Solid Films, 447-448, pp. 246-250.
14. Herbert, E. G., Pharr, G. M., Oliver, W. C., Lucas, B. N., and Hay, J. L., 2001, "On the Measurement of Stress-Strain Curves by Spherical Indentation," Thin Solid Films, 398-399, pp. 331-335.
15. Johnson, K. L., 1994, Contact Mechanics, Cambridge University Press, Cambridge.
16. Chu, S. N. G., and Li, J. C. M., 1977, "Impression Creep: A New Creep Test," J. Mater. Sci., 12, pp. 2200-2208.
17. Li, J. C. M., 2002, "Impression Creep and Other Localized Tests," Mater. Sci. Eng., A, 322(1-2), pp. 23-42.
18. Wright, S. C., Huang, Y., and Fleck, N. A., 1992, "Deep Penetration of Polycarbonate by a Cylindrical Punch," Mech. Mater., 13, pp. 277-284.
19. Lu, Y., and Shinozaki, D. M., 1998, "Deep Penetration Micro-Indentation Testing of High Density Polyethylene," Mater. Sci. Eng., A, 249, pp. 134-144.
20. Lu, Y., and Shinozaki, D. M., 2005, "Substrate Constraint on Micro- Indentation Testing of Polymer Coatings," Mater. Sci. Eng., A, 396, pp. 77-86.
21. Lo, J. C. W., Lu, Y., and Shinozaki, D. M., 2005, "Kink Band Formation During Microindentation of Oriented Polyethylene," Mater. Sci. Eng., A, 396(15), pp. 77-86.
22. Gao, X. L., Jing, X. N., and Subhash, G., 2006, "Two New Expanding Cavity Models for Indentation Deformation of Elastic Strain-Hardening Materials," Int. J. Solids Struct., 43, pp. 2193-2208.
23. Feng, G., Qu, S., Huang, Y, and Nix, W. D., 2007, "An Analytical Expression for the Stress Field Around an Elastoplastic Indentation/Contact, " Acta Mater., 55, pp. 2929-2938.
24. Hill, R., 1950, The Mathematical Theory of Plasticity, Oxford University Press, Clarendon, Oxford.
25. ABAQUS, 2006, ABAQUS Users' Manual, Hibbit, Karlson and Sorenson, Pawtucket, RI.
26. Mesarovic, S. D. and Fleck, N. A., 1987, "Spherical Indentation of Elastic-Plastic Solids," Proc. R. Soc. London, 455, pp. 2707-2728.
27. Liu, W. K., Chen, J. S., Belytschko, T. and Zhang, Y. F., 1991, "Adaptive ALE Finite Elements With Particular Reference to External Work Rate on Frictional Interface," Comput. Methods Appl. Mech. Eng., 93(2), pp. 189-216.
28. Voyiadjis, G. Z. and Foroozesh, M., 1991, "A Finite Strain, Total Lagrangian Finite Element Solution for Metal Extrusion Problems," Comput. Methods Appl. Mech, Eng., 86(3), pp. 337-370.
29. Perić., D., Vaz, M., and Owen, D. R. J., 1999, "On Adaptive Strategies for Large Deformations of Elasto-Plastic Solids at Finite Strains: Computational Issues and Industrial Applications," Comput. Methods Appl. Mech. Eng., 176(1-4), pp. 279-312.
30. Coupez, T., and Chenot, J. T., 1992, "Large Deformations and Automatic Remeshing," Computational Plasticity (COMPLASIII), E. Hinton, D. J. R. Owen, and E. Onate, eds., Pineridge, Swansea, pp. 1077-1088.