On adaptive strategies for large deformations of elasto-plastic solids at finite strains: Computational issues and industrial applications

Computer Methods in Applied Mechanics and Engineering

Volumn 176, Issue 1-4, 1999, Pages 279-312

  Peric D ^a   Vaz Jr , M ^b   Owen, D R J ^a  

^a SWANSEA UNIVERSITY   (United Kingdom)

^b SANTA CATARINA STATE UNIVERSITY   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; ELASTOPLASTICITY; MATHEMATICAL MODELS; PROBLEM SOLVING;

ERROR INDICATORS;

FINITE ELEMENT METHOD;

EID: 0032662998     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0045-7825(98)00342-9     Document Type: Article

References (74)

1. [1] I. Babuška, O.C. Zienkiewicz, J. Gago and E.R. de Oliveira, eds., Accuracy Estimates and Adaptive Refinements in Finite Element Computations (John Wiley, New York, 1986).
2. [2] P. Ladevèze, G. Cofignal and J.P. Pelle, Accuracy of elastoplatic and dynamic analysis, in: I. Babuška, O.C. Zienkiewicz, J. Gago and E.R. de Oliveira, eds., Accuracy Estimates and Adaptive Refinements in Finite Element Computations (John Wiley, New York, 1986) 181-203.
3. [3] H. Jin, L. Bernspang, R. Larsson and N.E. Wiberg, Mesh generation and mesh refinement procedures for computational plasticity, in: D.R.J. Owen, E. Oñate and E. Hinton, eds., Proc. Second Int. Conf. on Computational Plasticity: Models, Software and Applications -Barcelona, September 1989 (Pineridge Press, Swansea, 1989) 347-357.
4. [4] T. Belytschko, B.L. Wong and E.J. Plakacz, Fission-fusion adaptivity in finite elements for nonlinear dynamics of shells, Comput. Struct. 33 (1989) 1307-1323.
5. [5] M. Ortiz and J.J. Quigley IV, Adaptive mesh refinement in strain localization problems, Comput. Methods Appl. Mech. Engrg. 90 (1991) 781-804.
6. [6] C. Johnson and P. Hansbo, Adaptive finite element methods in computational mechanics, Comput. Methods Appl. Mech. Engrg. 101 (1992) 143-181.
7. [7] N.-S. Lee and K.-J. Bathe, Error indicators and adaptive remeshing in large deformation finite element analysis, Finite Elem. Anal. Des. 16 (1994) 99-139.
8. [8] D. Perić, J. Yu and D.R.J. Owen, On error estimates and adaptivity in elastoplastic solids: application to the numerical simulation of strain localization in classical and Cosserat continua, Int. J. Numer. Methods Engrg. 37 (1994) 1351-1379.
9. [9] D. Perić, Ch. Hochard, M. Dutko and D.R.J. Owen, Transfer operators for evolving meshes in small strain elasto-plasticity, Comput. Methods Appl. Mech. Engrg. 137 (1996) 331-344.
10. [10] L. Gallimard, P. Ladevèze and J.-P. Pelle, Error estimation and adaptivity in elastoplasticity, Int. J. Num. Methods Engrg 39 (1996) 189-217.
11. [11] A. Deb, J.H. Prevost and B. Loret, Adaptive meshing for dynamic strain localization, Comput. Methods Appl. Mech. Engrg. 137 (1996) 285-306.
12. [12] F.-J. Barthold, M. Schmidt and E. Stein, Error estimation mesh adaptivity for elasto-plastic deformations, in: D.R.J. Owen, E. Oñate and E. Hinton, Computational Plasticity V: Fundamentals and Applications (CIMNE, 1997) 597-602.
13. [13] M. Vaz Jr., M. Dutko and D.R.J. Owen, Adaptive strategy for ductile fracture analysis in damaged elastoplastic solids, 4th World Congress on Computational Mechanics, 1998.
14. [14] M. Vaz Jr., Computational approaches to metal cutting processes, Ph.D. Thesis, University of Wales, Swansea, Swansea, 1998.
15. [15] D.R.J. Owen and M. Vaz Jr., Computational techniques applied to high-speed machining under adiabatic strain localization conditions, Comput. Methods Appl. Mech. Engrg. 171 (1999) 445-461.
16. [16] E.H. Lee, Elastic-plastic deformation at finite strains, J. Appl. Mech. 36 (1969) 1-6.
17. [17] J.C. Simo, On the computational significance of the intermediate configuration and hyperelastic stress relations in finite deformation elastoplasticity, Mech. Mater. 4 (1985) 439-451.
18. [18] A.L. Eterovic and K.-J. Bathe, A hyperelastic based large strain elasto-plastic constitutive formulation with combined isotropic-kinematic hardening using the logarithmic stress and strain measures, Int. J. Numer. Methods Engrg. 30 (1990) 1099-1114.
19. [19] J.C. Simo, Algorithms for static and dynamic multiplicative plasticity that preserve the classical return mapping scheme of the infinitesimal theory, Comput. Methods Appl. Mech. Engrg. 99 (1992) 61-112.
20. [20] A. Cuitiño and M. Ortiz, A material-independent method for extending stress update algorithms from small-strain plasticity to finite plasticity with multiplicative kinematics, Engrg. Comput. 9 (1992) 437-451.
21. [21] D. Perić, D.R.J. Owen and M.E. Honnor, A model for finite strain elasto-plasticity based on logarithmic strains: computational issues, Comput. Methods Appl. Mech. Engrg. 94 (1992) 35-61.
22. [22] S. Nemat-Nasser, On finite deformation elasto-plasticity, Int. J. Solids Struct. 18(10) (1982) 857-872.
23. [23] G. Weber and L. Anand, Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids, Comput. Methods Appl. Mech. Engrg. 79 (1990) 173-202.
24. [24] J.C. Simo and C. Miehe, Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation, Comput. Methods Appl. Mech. Engrg. 98 (1992) 41-104.
25. [25] J.C. Simo and T.R.J. Hughes, General return mapping algorithms for rate-independent plasticity, in: C.S. Desai et al., ed., Constitutive Laws for Engineering Materials: Theory and Applications (Elsevier, Amsterdam, 1987) 221-231.
26. [26] G.P. Mitchell and D.R.J. Owen, Numerical solution for elasto-plastic problems, Engrg. Comput. 5 (1988) 274-284.
27. [27] D.E. Carlson and A. Hoger, The derivative of a tensor-valued function of a tensor, Quart. Appl. Math. 44(3) (1986) 409-423.
28. [28] E.A. de Souza Neto and D. Perić, A computational framework for a class of fully coupled models for elastoplastic damage at finite strains with reference to the linearization aspects, Comput. Methods Appl. Mech. Engrg. 130 (1996) 179-193.
29. [29] C. Miehe, Computation of isotropic tensor functions, Comm. Numer. Methods Engrg. 9 (1993) 889-896.
30. [30] C. Miehe, Aspects of the formulation and finite element implementation of large strain isotropic elasticity, Int. J. Numer. Methods Engrg. 37 (1994) 1981-2004.
31. [31] T. Belytschko, An overview of semidiscretization and time integration procedures, in: T. Belytschko and T.J.R. Hughes, eds., Computational Methods for Transient Analysis (North-Holland, Amsterdam, 1983) 1-65.
32. [32] T.J.R. Hughes, The Finite Element Method. Linear Static and Dynamic Finite Element Analysis (Prentice-Hall, Englewood Cliffs, NJ, 1987).
33. [33] K.J. Bathe, Finite Element Procedures, 2nd edition (Prentice-Hall, Englewood Cliffs, NJ, 1986).
34. [34] J. Simo and S. Rifai, A class of mixed assumed strain methods and the method of incompatible modes, Int. J. Numer. Methods Engrg. 29 (1990) 1595-1638.
35. [35] R.L. Taylor, P.J. Beresford and E.L. Wilson, A non-conforming element for stress analysis. Int. J. Numer. Methods Engrg. 10 (1976) 1211-1219.
36. [36] T.J.R. Hughes, Generalization of selective integration procedures to anisotropic and nonlinear media, Int. J. Numer. Methods Engrg. 15 (1980) 1413-1418.
37. [37] J.C. Simo, R.L. Taylor and K.S. Pister, Variational and projection methods for the volume constraint in finite deformation elasto-plasticity, Comput. Methods Appl. Mech. Engrg. 51 (1985) 177-208.
38. [38] T. Sussman and K.-K. Bathe, A finite element formulation for nonlinear incompressible elastic and inelastic analysis, Comput. Struct. 26 (1987) 357-409.
39. [39] B. Moran, M. Ortiz and F. Shin, Formulation of implicit finite element methods for multiplicative finite deformation plasticity, Int. J. Numer. Methods Engrg. 29 (1990) 483-514.
40. [40] J.C. Simo and F. Armero, Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes, Int. J. Numer. Methods Engrg. 33 (1992) 1413-1449.
41. [41] E.A. de Souza Neto, D. Perić, G.C. Huang and D.R.J. Owen, Remarks on the stability of enhanced strain elements in finite elasticity and elastoplasticity, Comm. Numer. Methods Engrg. 11 (1995) 951-961.
42. [42] E.A. de Souza Neto, D. Perić, M. Dutko and D.R.J. Owen, Design of simple low order finite elements for large strain analysis of nearly incompressible solids, Int. J. Solids Struct. 33 (1996) 3277-3296.
43. [43] T. Belytschko, J.S.-J. Ong, W.K. Liu and J.M. Kennedy, Hourglass control in linear and nonlinear problems, Comput. Methods Appl. Mech. Engrg. 43 (1984) 251-276.
44. [44] T. Belytschko and L.P. Bindeman, Assumed strain stabilization of the 4-node quadrilateral with 1-point quadrature for nonlinear problems, Comput. Methods Appl. Mech. Engrg. 88 (1991) 311-340.
45. [45] O.C. Zienkiewicz, Y.C. Liu and G.C. Huang, Error estimation and adaptivity in flow simulations for forming problems, Int. J. Numer. Methods Engrg. 25 (1988) 23-42.
46. [46] O.C. Zienkiewicz and G.C. Huang, A note on localization phenomena and adaptive finite element analysis in forming processes, Comm. Appl. Numer. Methods 6 (1990) 71-76.
47. [47] O.C. Zienkiewicz, G.C. Huang and Y.C. Liu, Adaptive FEM computation of forming process - application to porous and non-porous materials, Int. J. Numer. Methods Engrg. 30 (1990) 1527-1553.
48. [48] L. Fourment and J.-L. Chenot, Error estimators for viscoplastic materials: application to forming processes, Engrg. Comput. 12 (1995) 469-490.
49. [49] A. Moal and E. Massoni, Finite element simulation of the inertia welding of two similar parts, Engrg. Comput. 12 (1995) 497-512.
50. [50] D.R.J. Owen, D. Perić, A.J.L. Crook, E.A. de Souza Neto, Jianguo Yu and M. Dutko, Advanced computational strategies for 3-D large scale metal forming simulations, in: S.-F. Shen and P. Dawson, eds., Proc. Fifth Int. Conf. on Numerical Methods in Industrial Forming Processes - NUMI-FORM 95 - Ithaca, New York, 18-21 June 1995 - Simulation of Materials processing: Theory, Methods and Applications (Balkema, Rotterdam, 1995) 7-22.
51. [51] T.D. Marusich and M. Ortiz, Modelling and simulation of high-speed machining. Int. J. Numer. Methods 38 (1995) 3675-3694.
52. [52] O.C. Zienkiewicz and J.Z. Zhu, A simple error estimator and adaptive procedure for practical engineering analysis. Int. J. Numer. Methods Engrg. 24 (1987) 337-357.
53. [53] O.C. Zienkiewicz and R.L. Taylor, The Finite Element Method-Vol. 1: Basic Formulation and Linear Problems (McGraw-Hill, 1989).
54. [54] A.M. Freudenthal, The Inelastic Behaviour of Engineering Materials and Structures (John Wiley, New York, 1950).
55. [55] L.M. Kachanov, Time of the rupture process under creep condition, Izv. Akad. Nauk. SSSR, Otd. Tekhn. Nauk. 8 (1958) 26-31.
56. [56] M.G Cockcroft and D.J. Latham, Ductility and workability of metals, J. Inst. Metals 96 (1968) 33-39.
57. [57] D.M. Norris, J.E. Reaugh, B. Moran and D.F. Quiñones, A plastic-strain, mean-stress criterion for ductile fracture, J. Engrg. Mat. Tech., Trans. ASME 100 (1978) 279-286.
58. [58] A.G. Atkins, Possible explanation for unexpected departures in hydrostatic tension-fracture strain relations, Metal Sci. 15 (1981) 81-83.
59. [59] A.G. Atkins and Y-W. Mai, Elastic and Plastic Fracture (Ellis Horwood Ltd., Chichester, 1985).
60. [60] S.E. Clift, P. Hartley, C.E.N. Sturgess and G.W. Rowe, Fracture prediction in plastic deformation process, Int. J. Mech. Sci. 32 (1990) 1-17.
61. [61] S. Cescotto and Y.Y. Zhu, Modelling of ductile fracture initiation during bulk forming, in: D.R.J. Owen, E. Oñate and E. Hinton, eds., Computational Plasticity - Fundamentals and Applications (Pineridge Press, Swansea, 1995) 987-998.
62. [62] B.P.P.A. Gouveia, J.M.C. Rodrigues and P.A.F. Martins, Fracture predicting in bulk metal forming, Int. J. Mech. Sci. 38 (1996) 361-372.
63. [63] S. Murakami, Role of continuum damage mechanics in fracture analysis, in: M. Kleiber and J.A. König, eds., Inelastic Solids and Structures (Pineridge Press, Swansea, 1990) 67-80.
64. [64] D. François, Fracture and damage, in: L.H. Larsson, ed., Elasto-Plastic Fracture Mechanics (D. Reidel Publishing Co., Brussels, 1985) 1-11.
65. [65] L.F. Gillemot, Criterion of crack initiation and spreading, Engrg. Fract. Mech. 8 (1976) 239-253.
66. [66] W. Tai and B.X. Yang, A new damage mechanics criterion for ductile fracture, Engrg. Fract. Mech. 27 (1987) 371-378.
67. [67] M. Dutko, D. Perić, D.R.J. Owen, Z. Wei and J. Yu, Bulk forming simulation by adaptive explicit FEM, in: D.R.J. Owen, E. Oñate and E. Hinton, eds., Computational Plasticity: Theory and Applications, Vol. 2 (CIMNE, Barcelona, 1997) 1305-1312.
68. [68] R.F. Recht, Catastrophic thermoplastic shear, J. Appl. Mech., Trans. ASME 31 (1964) 189-193.
69. [69] D. Brokken, A.M. Goijaerts, W.A.M. Brekelmans and C.W.J. Oomens, Modeling of the blanking process, in: D.R.J. Owen, E. Oñate and E. Hinton, eds., Computational Plasticity: Theory and Applications, Vol. 2 (CIMNE, Barcelona, 1997) 1417-1424.
70. [70] J.R. Rice and D.M. Tracey, On the ductile enlargement of voids in triaxial stress fields, J. Mech. Phys. Solids 17 (1969) 201-217.
71. [71] L. Morançay, H. Homsi and J.M. Roelandt, Application of remeshing techniques to the simulation of metal cutting by punching, in: D.R.J. owen, E. Oñate and E. Hinton, eds., Computational Plasticity: Theory and Applications, Vol. 1 (CIMNE, Barcelona, 1997) 611-618.
72. [72] A.L. Gurson, Continuum theory of ductile rupture by void nucleation and growth - Part I: Yield criteria and flow rule for porous media, J. Engrg. Mat. Techn. 99 (1977) 2-15.
73. [73] N. Yukawa, Y. Inukai, Y. Yoshida, T. Ishikawa and T. Jimma, Finite element analysis for blanking problems, in: S. Basri, A.A.A. Samad and A.M. Hamouda, eds., Application of Numerical Methods in Engineering (UPM Press, Serdang, Malaysia, 1997) 479-487.
74. [74] J.A. Schey, Introduction to Manufacturing Processes (McGraw-Hill, New York, 1987).