Structure of high-velocity dense sprays in the near-nozzle region

Atomization and Sprays

Volumn 16, Issue 5, 2006, Pages 579-597

  Tanner, F X ^a   Feigl, K A ^a   Ciatti, S A ^b   Powell, C F ^b   Cheong, S K ^c   Liu, J ^c   Wang, J ^c  

^a MICHIGAN TECHNOLOGICAL UNIVERSITY   (United States)

^b ARGONNE NATIONAL LABORATORY   (United States)

^c ARGONNE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; FLOW PATTERNS; NOZZLES; PRESSURE DISTRIBUTION; SPRAYING;

EXPERIMENTAL CORRELATIONS; FUEL SPRAYS; INJECTION PRESSURE; SPRAY AXIS;

FUEL INJECTION;

COMPUTER SIMULATION; FLOW PATTERNS; FUEL INJECTION; NOZZLES; PRESSURE DISTRIBUTION; SPRAYING;

EID: 33748313285     PISSN: 10445110     EISSN: None     Source Type: Journal    
DOI: 10.1615/AtomizSpr.v16.i5.70     Document Type: Article

References (30)

1. A. A. Amsden, P. J. O'Rourke, and T. D. Butler, KIVA II: A Computer Program for Chemically Reactive Flows with Sprays, Los Alamos National Laboratory Tech. Rep. LA-11560-MS, Los Alamos, NM, May 1989.
2. A. A. Amsden, KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries, Los Alamos National Laboratory Tech. Rep. LA-12503-MS, Los Alamos, NM, March 1993.
3. F. X. Tanner, A Cascade Atomization and Drop Breakup Model for the Simulation of High-Pressure Liquid Jets, SAE Trans, vol. 112, no. 3, pp. 1352-1366, 2004.
4. F. X. Tanner, Development and Validation of a Cascade Atomization and Drop Breakup Model for High-Velocity Dense Sprays, Atomization and Sprays, vol. 14, pp. 211-242, 2004.
5. F. X. Tanner, Liquid Jet Atomization and Droplet Breakup Modeling of Non-evaporating Diesel Fuel Sprays, SAE Trans, vol. 106, no. 3, pp. 127-140, 1998.
6. F. X. Tanner and G. Weisser, Simulation of Liquid Jet Atomization for Fuel Sprays by Means of a Cascade Drop Breakup Model, SAE Paper No. 980808, Warrendale, PA, 1998.
7. H. Chaves, M. Knapp, A. Kubitzek, F. Obermeier, and T. Schneider, Experimental Study of Caviation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles, SAE Paper No. 950290, Warrendale, PA, 1995.
8. N. Tamaki, M. Shimizu, K. Nishida, and H. Hiroyasu, Effects of Cavitation and Internal Flow on Atomization of a Liquid Jet, Atomization and Sprays, vol. 8, pp. 179-197, 1998.
9. A. Yule, A. Dalli, and K. Yeong, Transient Cavitation and Separation in a Scaled-Up Model of a VCO Orifice, Proc. 14th ILASS-Europe Annual Conf, pp. 230-235, 1998.
10. C. Arcoumanis and M. Gavaises, Cavitation in Diesel Injectors: Modelling and Experiments, Proc. 14th ILASS-Europe Annual Conf, pp. 248-255, 1998.
11. H. Hiroyasu, Spray Breakup Mechanism from the Hole-Type Nozzle and Its Applications, Atomization and Sprays, vol. 10, pp. 511-527, 2000.
12. D. Schmidt, C. Rutland, and M. Corradini, A Numerical Study of Cavitating Flow through Various Nozzle Shapes, SAE Paper No. 971597, Warrendale, PA, 1997.
13. C. Arcoumanis and M. Gavaises, Linking Nozzle Flow with Spray Characteristics in a Diesel Fuel Injection System, Atomization and Sprays, vol. 8, pp. 307-347, 1998.
14. D. Schmidt, J. Rutland, and M. Corradini, A Fully Compressible, Two-Dimensional Model of Small, High-Speed, Cavitating Nozzles, Atomization and Sprays, vol. 9, pp. 255-276, 1999.
15. R. Bunnell, S. Heister, C. Yen, and S. Collicott, Cavitating Injector Flows: Validation of Numerical Models and Simulations of Pressure Atomizers, Atomization and Sprays, vol. 9, pp. 445-466, 1999.
16. X. Changhai, R. Bunnell, and S. Heister, On the Influence of Internal Flow Structure on Performance of Plain-Orifice Atomizers, Atomization and Sprays, vol. 11, pp. 335-350, 2001.
17. O. L. Gülder, Temporally and Spatially Resolved Drop Sizing of Dense Diesel Sprays, Proc. 2nd ILASS-Americas Annual Meeting, pp. 78-81, 1988.
18. O. L. Gülder, G. J. Smallwood, and D. R. Snelling, Diesel Spray Structure Investigation by Laser Diffraction and Sheet Illumination, SAE Paper 920577, Warrendale, PA, 1992.
19. Y. Yue, C. F. Powell, R. Poola, J. Wang, and J. K. Schaller, Quantitative Measurements of Diesel Fuel Spray Characteristics in the Near-Nozzle Region Using X-Ray Absorption, Atomization and Sprays, vol. 11, pp. 471-490, 2001.
20. A. B. Liu and R. D. Reitz, Mechanisms of Air-Assisted Liquid Atomization, Atomization and Sprays, vol. 3, pp. 55-75, 1993.
21. G. I. Taylor, The Shape and Acceleration of a Drop in a High Speed Air Stream, in The Scientific Papers of Sir Geoffrey Ingram Taylor, vol. 3, pp. 457-464, Cambridge University Press, New York, 1963.
22. P. J. O'Rourke and A. A. Amsden, The TAB Method for Numerical Calculation of Spray Droplet Breakup, SAE Paper 872089, Warrendale, PA, 1987.
23. V. G. Levich, Physicochemical Hydrodynamics, Prentice-Hall, Englewood Cliffs, NJ, 1962.
24. J Naber and D. Siebers, Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays, SAE Paper No. 960034, Warrendale, PA, 1996.
25. C. F. Powell, Y. Yue, R. Poola, and J. Wang, Time-Resolved Measurements of Supersonic Fuel Sprays Using Synchrotron X-Rays, J. Synchrotron Radiat, vol. 7, pp. 356-360, 2000.
26. Z. Y. Han and R. D. Reitz, Turbulence Modeling of Internal Combustion Engines Using Models, Combust. Sci. Technol, vol. 106, pp. 267-295, 1995.
27. S. A. Ciatti, C. F. Powell, S.-K. Cheong, J. Liu, J. Wang, and F. X. Tanner, Comparison of X-Ray Based Fuel Spray Measurements with Computer Simulation Using the CAB Model, CIMAC Paper No. 264, Kyoto, Japan, 2004.
28. S.-K. Cheong J. Liu, D. Shu, J. Wang, and C. F. Powell, Dynamics of Diesel Fuel Sprays Studied by Ultra-Fast X-Radiography, SAE Paper No. 2004-01-2026, Warrendale, PA, 2004.
29. F. X. Tanner and K. Boulouchos, A Computational Investigation of the Spray-Induced Flow and Its Influence on the Fuel Distribution for Continuous and Intermittent DI-Diesel Sprays, SAE Paper No. 960631, Warrendale, PA, 1996.
30. J. Labs and T. Parker, Multiple Scattering Effects on Infrared Scattering Measurements Used to Characterize Droplet Size and Volume Fraction Distributions in Diesel Sprays, Proc. 17th ILASS-Americas Annual Conf, CD ROM Publication, 2004.