A numerical study on pile-up in nanoindentation creep

International Journal of Surface Science and Engineering

Volumn 2, Issue 1-2, 2008, Pages 41-51

  Mandal, S ^a,b   Kose, S ^a,b   Frank, A ^a,b   Elmustafa, A A ^a,b  

^a Old Dominion University   (United States)

^b OLD DOMINION UNIVERSITY   (United States)

Author keywords

ABAQUS; Creep; Hardness measurement; Nanoindentation; Pile up

Indexed keywords

ABAQUS; CREEP; HARDNESS; NANOINDENTATION; STRAIN HARDENING; STRAIN RATE;

HARDNESS MEASUREMENT; HERTZIAN CONTACT MECHANICS; INDENTATION CREEP; NANOINDENTATION CREEPS; PILE-UPS; STRAIN RATE SENSITIVITY; VON MISES STRESS; WORK HARDENING EXPONENT;

PILES;

EID: 54449095042     PISSN: 1749785X     EISSN: 17497868     Source Type: Journal    
DOI: 10.1504/IJSURFSE.2008.018967     Document Type: Article

References (25)

1. Aghaie-Khafri, M. and Mahmudi, R. (1998) 'Flow localization and plastic instability during the tensile deformation of Al alloy sheet', JOM Vol. 50, No. 11. pp.50-52.
2. Biwa, S. and Storakers, B. (1995) 'Analysis of fully plastic brinell indentation', Journal of the Mechanics and Physics of Solids, Vol. 43, No. 8, p.1303.
3. Bolshakov, A., Oliver, W.C. and Pharr, G.M. (1996) 'Influences of stress on the measurement of mechanical properties using nanoindentation. II. Finite element simulations', Journal of Materials Research, Vol. 11, No. 3, pp.760-768.
4. Bower, A.F., Fleck, N.A., Needleman, A. and Ogbonna, N. (1993) 'Indentation of a power law creeping solid', Proceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences), Vol. 441, No. 1911, pp.97-124.
5. Cheng, Y-T. and Cheng, C-M. (1998) 'Effects of 'sinking in' and 'piling up' on estimating the contact area under load in indentation', Philosophical Magazine Letters, Vol. 78, No. 2, pp.115-120.
6. Doerner, M.F. and Nix, W.D. (1986) 'A method for interpreting the data from depth-sensing indentation instruments', Journal of Materials Research, Vol. 1, No. 4, pp.601-609.
7. Doerner, M.F. and Nix, W.D. (1988) 'Stresses and deformation processes in thin films on substrates', CRC Critical Reviews in Solid State and Materials Sciences, Vol. 14, No. 3, pp.225-268.
8. Doerner, M.F., Gardner, D.S. and Nix, W.D. (1986) 'Plastic properties of thin films on substrates as measured by submicron indentation hardness and substrate curvature techniques', Journal of Materials Research Vol. 1, No. 6, pp.845-851.
9. Elmustafa, A.A., Kose, S. and Stone, D.S. (2007) 'The strain-rate sensitivity of the hardness in indentation creep', Journal of Materials Research, Vol. 22, No. 4, pp.926-936.
10. Feng, G. and Ngan, A.H.W. (2001a) 'Creep and strain burst in indium and aluminium during nanoindentation', Scripta Materialia, Vol. 45, No. 8, pp.971-976.
11. Feng, G. and Ngan, A.H.W. (2001b) The Effects of Creep on Elastic Modulus Measurement using Nanoindentation, Materials Research Society, Boston, MA.
12. Feng, G. and Ngan, A.H.W. (2002) 'Effects of creep and thermal drift on modulus measurement using depth-sensing indentation', Journal of Materials Research, Vol. 17, No. 3, pp.660-668.
13. Fischer-Cripps, A.C. (2004) 'A simple phenomenological approach to nanoindentation creep', Materials Science and Engineering A (Structural Materials: Properties, Microstructure and Processing), Vol. A385, Nos. 1-2, pp.74-82.
14. Hannula, S.P., Stone, D. and Li, C-Y. (1985a) 'Determination of time-dependent plastic properties of metals by indentation load relaxation techniques', Mater. Res. Soc., Boston, MA, USA.
15. Hannula, S.P., Stone, D. and Li, C-Y. (1985b) The Use of Indentation Techniques in Evaluating Mechanical Properties of Thin Film Metallization, IEEE, Washington DC, USA.
16. Hay, J.L., Oliver, W.C., Bolshakov, A. and Pharr, G.M. (1998) 'Using the ratio of loading slope and elastic stiffness to predict pile-up and constraint factor during indentation', Mater. Res. Soc., San Francisco, CA, USA.
17. Hertz, H. (1896) Miscellaneous Papers by H. Hertz, Macmillan.
18. Hill, R., Storakers, B. and Zdunek, A.B. (1989) 'A theoretical study of the Brinell hardness test', Proceedings of the Royal Society of London, Series A (Mathematical and Physical Sciences), Vol. 423, No. 1865, p.301-330.
19. Mesarovic, S.D. and Fleck, N.A. (1999) 'Spherical indentation of elastic-plastic solids', Proceedings of the Royal Society of London, Series A (Mathematical, Physical and Engineering Sciences), Vol. 455, No. 1987, pp.2707-2728.
20. Ngan, A.H.W., Wang, H.T., Tang, B. and Sze, K.Y. (2005) 'Correcting power-law viscoelastic effects in elastic modulus measurement using depth-sensing indentation', International Journal of Solids and Structures, Vol. 42, Nos. 5-6, pp.831-1846.
21. Pelletier, H., Krier, J., Cornet, A. and Mille, P. (2000) 'Limits of using bilinear stress-strain curve for finite element modeling of nanoindentation response on bulk materials'. Thin Solid Films, Vol. 379, Nos. 1-2, pp.147-155.
22. Rar, A., Sohn, S., Oliver, W.C., Goldsby, D.L., Tullis, T.E. and Pharr, G.M. (2005) On the measurement of Creep by Nanoindentation with Continuous Stiffness Techniques, Materials Research Society, Boston, MA, USA.
23. Stone, D.S. and Yoder, K.B. (1994) 'Division of the hardness of molybdenum into rate-dependent and rate-independent components', Journal of Malerials Research, Vol. 9, No. 10, pp.2524-2533.
24. Taljat, B. and Pharr, G.M. (2004) 'Development of pile-up during spherical indentation of elastic-plastic solids'. International Journal of Solids and Structures, Vol. 41, No. 14, pp.3891-3904.
25. Tang, B. and Ngan, A.H.W. (2003) 'Accurate measurement of tip - sample contact size during nanoindentation of viscoelastic materials', Journal of Materials Research, Vol. 18, No. 5, pp.1141-1148.