On the problem of the fatigue limit of metallic materials

Metal Science and Heat Treatment

Volumn 46, Issue 5-6, 2004, Pages 244-249

  Terent'ev, V F ^a,b  

^a BAIKOV INSTITUTE OF METALLURGY AND MATERIALS SCIENCE   (Russian Federation)

^b BAUMAN MOSCOW STATE TECHNICAL UNIVERSITY   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

CHROMIUM; CRACKS; FATIGUE OF MATERIALS; SILICON; STEEL; STRENGTH OF MATERIALS; SURFACE PROPERTIES;

CYCLIC TESTS; FATIGUE LIMIT; GIGACYLE FATIGUE; LIGHT ALLOYS;

MATERIALS SCIENCE;

EID: 5444231902     PISSN: 00260673     EISSN: None     Source Type: Journal    
DOI: 10.1023/B:MSAT.0000043111.07884.3b     Document Type: Article

References (33)

1. W.-W. Maenning and H.-J. Taferner, "Ursachen der Ausbildung einer Dauerschwingfestigkeisgrenze bei kubischraumzentrierten, kubischflachenzentrierter und hexagonal dichtest gepackten metallen," VDI Foschungsheft, No. 611, 1-39 (1982).
2. A. Ferro and G. Montalenti, "Fatigue of pure iron containing a small quantity of carbon after strain aging," Philosoph. Mag., 8(85), 105-119 (1963).
3. V. F. Terent'ev, Fatigue Strength of Metals and Alloys [in Russian], Intermet Engineering, Moscow (2002).
4. V. F. Terent'ev, Fatigue of Metallic Materials [in Russian], Nauka, Moscow (2002).
5. T. Ekobori, The Physics and Mechanics of Fracture and Strength of Solids [Russian translation], Metallurgiya, Moscow (1971).
6. V. T. Troshchenko and L. A. Sosnovskii, Fatigue Resistance of Metals and Alloys, Part I [in Russian], Naukova Dumka, Kiev (1987).
7. GOST 25.502-79, Methods of Mechanical Tests. Methods of Fatigue Tests [in Russian], Izd. Standartov, Moscow (1986).
8. T. Nakamura, M. Kaneko, T. Noguchi, and K. Jinbo, "Relation between high cycle fatigue characteristics and fracture origins in low temperature tempered Cr - Mo steel," Trans. Jap. Mech. Eng. A, 64(623), 68-73 (1998).
9. I. E. Kolosov and T. A. Lebedev, "Cyclic strength of hardened tool steels," Metalloved. Term. Obrab. Met., No. 10, 15-19 (1962).
10. Q. Y. Wang, G. Baudry, C. Bathias, and J. Y. Berard, "Sub-surface crack initiation due to ultra-high cycle fatigue," in: Advances in Mechanical Behavior, Plasticity and Damage, Proc. EUROMAT 2000, Amsterdam-Lausanne, Vol.2. Elsevier, New York (2000), pp. 1083-1087.
11. K. Shiozawa, L. Lu, and S. Ishihara, "S-N curve characteristics and subsurface crack initiation behavior in ultra-long life fatigue of high carbon-chromium bearing steel," Fatigue Fract. Eng. Mater. Struct., 24(12),781-790 (2001).
12. K. Shiozawa, L. Lu, and S. Ishihara, "Duplex S - N characteristics and subsurface fatigue crack initiation behavior in high carbon-chromium bearing steel," in: Proc. 13th Europ. Conf. of Fracture 2000, San Sebastian, Spain, Elsevier Science (2000), pp. 103-111.
13. Y. Furuya, S. Matsuoka, T. Abe, et al., "Effect of frequency on giga-cycle fatigue properties for low temperature tempered SNSM 439 steel," Trans. Jap. Soc. Mech. Eng. A, 68(667), 477-483 (2002).
14. L. V. Konovalov and I. M. Petrova, "Special features of cyclic strength of structural steels in the domain of long-term endurance," Vestn. Mashinostr., No. 9, 3-11 (1998).
15. H. Mughrabi, "On "multi-stage" fatigue life diagrams and the relevant life-controlling mechanisms," in: Proc. Int. Conf. on "Fatigue in the Very High Cycle Regime" 2-4 July, 2001, Vienna, Austria, Inst. of Meteorol. and Physics Austria (2001), pp. 35-49.
16. H. Zhang and J. Sun, "Change in density of α-Fe during healing of internal fatigue microcracks under annealing," Acta Met., 39(4), 351-354 (2003).
17. Y. Furuja and S. Matsuoka, "Improvement of gigacycle fatigue properties by modified ausforming in 1600 and 2000 MPa-class low-alloy steels," Metallurg. Mater. Trans. A, 33A, November, 3421-3431(2002).
18. Y. Murakami, M. Takada, and T. Toriyama, "Super-long life tension-compression fatigue properties of quenched and tempered 0.46% carbon steel," Int. J. Fatigue, 16, 661-667 (1998).
19. S. Nishijiama and K. Kanasawa, "Stepwise S-N curve and fish-eye failure in gigacycle regime," Fatigue Fract. Eng. Mater. Struct., 22, 601-607 (1999).
20. C. Bathias, "There is no infinite fatigue life in metals," Fatigue Fract. Eng. Mater. Struct., 22, 559-565 (1999).
21. T. Sakai, M. Takeda, K. Shiazawa, et al., "Experimental evidence of duplex S - N characteristics in wide life region for high strength steels," in: FATIGUE 99, Proc. 7th Int. Fatigue Congr., Higher Education Press, Beijing and FMAS, West Midlands, Vol. I (1999), pp. 573-578.
22. Q. Y. Wang, C. Bathias, S. Rathery, and J. Y. Board, "Comportement en fatigue gigacyclique d'une fonte GS," Rev. Met. (Fr.), 96(2), 221-226 (1999).
23. P. Lucas and L. Kunz, "Specific features of high cycle and ultra-high cycle fatigue," in: Proc. Int. Conf. on "Fatigue in the Very High Cycle Regime," 2-4 July, 2001, Vienna, Austria, Inst. Meteorol. and Physics Austria (2001). pp. 23-32.
24. V. F. Terent'ev, "Processes of micro- and macroscopic deformation of metallic materials below the fatigue limit," Metally, No. 5, 1-8 (2003).
25. Y. Murakami, "Mechanism of fatigue failure in ultralong life regime," in: Proc. Int. Conf. on "Fatigue in the Very High Cycle Regime," 2-4 July, 2001, Vienna, Austria, Inst. Meteorol. Physics Austria (2001), pp. 12-21.
26. R. Murakami, D. Yonekura, and Z. Ni, "Fatigue fracture behavior of high strength steel in super long life range," JSME Int. J., Ser. A, 45(4), 517-522 (2002).
27. O. Umezawa and K. Nagai, "Subsurface crack generation in high cycle fatigue for high strength alloys," ISIJ Int., 37(12), 1170-1179 (1997).
28. H.-J. Spies and P. Trubitz, "Ermüdungsverhalten nitrierter Stähle," Härter - Techn. Mitt., 51(6), 378-384 (1996).
29. V. S. Ivanova, V. A. Kobzev, and V. F. Terenfev, "A study of cyclic fracture toughness of steel 45 and choice of optimum surface hardening treatment," in: Cyclic Fracture Toughness of Metals and Alloys [in Russian], Nauka, Moscow (1981), pp. 107-126.
30. V. S. Ivanova, V. F. Terent'ev, V. A. Kobzev, and T. Yokobori, "Investigation on the cycle fatigue toughness of surface-strengthened structural steel," in: Rep. Res. Inst. Strength and Fracture of Materials, Tohoku Univ., Vol. 15, No. 1, May (1980), pp. 1-8.
31. M. Nakajima, K. Tokaji, H. Itoga, and H.-N. Ko, "Morphology of stepwise S - N curves depending on work-hardened layer and humidity in a high strength steel," Fatigue Fract. Eng. Mater. Struct., 26(12), 1113-1118 (2003).
32. N. Limodin, Y. Verreman, and. T. N. Tarfa, "Axial fatigue of gas-nitrided quenched and tempered AISI 4140 steel: effect of nitriding depth," Fatigue Fract. Eng. Mater. Struct., 26(9), 811-820 (2003).
33. T. Abe, Y. Furuya, and S. Matsuoka, "Gigacycle fatigue properties of 1800 MPa class spring steels," Fatigue Fract. Eng. Mater. Struct., 27(2), 159-167 (2004).