Subsurface crack generation in high-cycle fatigue for high strength alloys

ISIJ International

Volumn 37, Issue 12, 1997, Pages 1170-1179

  Umezawa, Osamu ^a   Nagai, Kotobu ^a  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

Author keywords

Austenitic steel; Defect; Fatigue crack initiation; Fish eye; High strength steel; High cycle fatigue; Low temperature; Stage I (Mode II) crack; Threshold stress intensity factor range; Titanium alloy

Indexed keywords

AUSTENITE; CRACK PROPAGATION; FATIGUE OF MATERIALS; METALLOGRAPHIC MICROSTRUCTURE; STEEL; STRAIN; STRENGTH OF MATERIALS; STRESS INTENSITY FACTORS; TITANIUM ALLOYS;

CYCLIC STRESS;

CRACK INITIATION;

EID: 0031375372     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.37.1170     Document Type: Review

References (61)

1. For example; P. Neumann: Acta Metall., 17 (1969), 1219.
2. For example; M. Klesnil and P. Lukas: Fatigue of Metallic Materials, Elsevier, Amsterdam, (1980).
3. W. E. Duckworth and E. Ineson: Clean Steel, Iron Steel Inst., Sp. Rep., 77 (1963), 87.
4. J. Lankford and F. N. Kusenberger: Metall. Trans., 4 (1973), 553.
5. T. Kunio, M. Shimizu, K. Yamada, K. Sakura and T. Yamamoto: Int. J. Fract., 17 (1981), 111.
6. J. Inada, H. Yaguchi, H. Inoue, Y. Kuroshima, J. Komotori and M. Shimizu: CAMP-ISIJ, 4 (1993), 1762, in Japanese.
7. C. Masuda, S. Nishijima, H. Sumiyoshi, Y. Tanaka and A. Ishii: J. Soc. Mater. Sci., Jpn. (Zairyo), 34 (1985), 664, in Japanese.
8. C. Masuda, S. Nishijima and Y. Tanaka: J. Jap. Mech. A, 52 (1986), No. 476, 847, in Japanese.
9. T. Abe and K. Kanazawa: J. Soc. Mater. Sci., Jpn. (Zairyo), 40 (1991), 1447, in Japanese.
10. K. Kanazawa, T. Abe and S. Nishijima: NRIM Mater. Strength Data Sheet, Technical Document, No. 9, (1995), in Japanese.
11. K. Kanazawa, M. Kimura and S. Nishijima: NRIM Mater. Strength Data Sheet, Technical Document, No. 14, (1996), in Japanese.
12. Y. Murakami: Tetsu-to-Hagané, 75 (1989), 1267, in Japanese.
13. NRIM Fatigue Data Sheet, No. 59, NRIM, (1988).
14. NRIM Fatigue Data Sheet, No. 60, NRIM, (1989).
15. NRIM Fatigue Data Sheet, No. 63, NRIM, (1990).
16. NRIM Fatigue Data Sheet, No. 69, NRIM, (1992).
17. NRIM Fatigue Data Sheet, No. 73, NRIM, (1993).
18. NRIM Fatigue Data Sheet, No. 66, NRIM, (1990).
19. NRIM Fatigue Data Sheet, No. 67, NRIM, (1991).
20. NRIM Fatigue Data Sheet, No. 72, NRIM, (1992).
21. NRIM Fatigue Data Sheet, No. 67, NRIM, (1993).
22. A. Atrens, W. Hoffelner, T. W. Duerig and J. E. Allison: Scr. Metall., 17 (1983), 601.
23. D. F. Neal and P. A. Blenkinsop: Acta Metall., 24 (1976), 59.
24. J. Ruppen, P. Bhowal, D. Eylon and A. J. McEvily: Fatigue Mechanisms, ASTM STP 675, Philadelphia, (1979), 47.
25. J. A. Ruppen, D. Eylon and A. J. McEvily: Metall. Trans., 11A (1980), 1072.
26. S. Adachi, L. Wagner and G. Lutjering: Titanium Science and Technology, Vol. 4, ed. by G. Lutjering, U. Zwicher and E. Bunk, DGM, (1985), 2139.
27. D. Eylon and B. Strope: J. Mater. Sci., 14 (1979), 345.
28. D. Eylon: J. Mater. Sci., 14 (1979), 1914.
29. M. Hagiwara, Y. Kaieda, Y. Kawabe and S. Miura: Tetsu-to-Hagané, 76 (1990), 2182, in Japanese.
30. M. Hagiwara, Y. Kaieda, Y. Kawabe, S. Miura, T. Hirano and S. Nagasaki: Tetsu-to-Hagané, 77 (1991), 139, in Japanese.
31. R. Chait and T. S. DeSisto: Metall. Trans., 8A (1977), 1017.
32. H. Yokoyama, O. Umezawa, K. Nagai and T. Suzuki: ISIJ Int., 37 (1997), 1237.
33. K. Nagai, T. Ogata, T. Yuri, K. Ishikawa, T. Nishimura, T. Mizoguchi and Y. Ito: Trans. Iron Steel Inst. Jpn., 27 (1987), 376.
34. O. Umezawa, K. Nagai and K. Ishikawa: Mater. Sci. Eng., A129 (1990), 217.
35. K. Nagai, T. Yuri and O. Umezawa: Titanium '95, Vol. 2, ed. by P. A. Blenkinsop, W. J. Evans and H. M. Flower, IOM, London, (1996), 1139.
36. K. Nagai, T. Yuri, T. Ogata, O. Umezawa, K. Ishikawa, T. Nishimura, T. Mizoguchi and Y. Ito: ISIJ Int., 31 (1991), 882.
37. O. Umezawa, K. Nagai and K. Ishikawa: Fatigue 90, Vol. 1, ed. by H. Kitagawa and T. Tanaka, MCEP, Birmingham, (1990), 267.
38. O. Umezawa, K. Nagai, H. Yokoyama and T. Suzuki: unpublished data.
39. Y. Minagawa: Tetsu-to-Hagané, 75 (1989), 1104, in Japanese.
40. K. Nagai, T. Yuri, O. Umezawa, T. Ogata and K. Ishikawa: Proc. Stainless Steels 1991, Vol. 1, ISIJ, Tokyo, (1991), 465.
41. O. Umezawa and K. Nagai: Metall. Mater. Trans. A, in printing.
42. O. Umezawa and K. Nagai: Metall. Mater. Trans. A, to be submitted.
43. T. Yuri, K. Nagai, O. Umezawa and T. Ogata: Proc. Cryogenic Eng. Conf., Vol. 54, Cryo. Eng. Soc. Jap., Tokyo, (1995), 125, in Japanese.
44. K. Nagai, O. Umezawa and K. Ishikawa: Bull. Jpn. Inst. Met., 30 (1991), 669, in Japanese.
45. O. Umezawa, K. Nagai and K. Ishikawa: Tetsu-to-Hagané, 75 (1989), 159, in Japanese.
46. A. W. Bowen: Titanium Science and Technology, ed. by R. I. Jaffee and H. M. Burte, Plenum, (1973), 1271.
47. C. A. Stubbington and A. W. Bowen: J. Mater. Sci., 9 (1974), 941.
48. M. Peters, A. Gysler and G. Luetjering: Titanium '80, Vol. 3, ed. by H. Kimura and O. Izumi, AIME, NY, (1980), 1777.
49. D. Eylon and C. M. Pierce: Metall. Trans., 7A (1976), 111.
50. R. K. Steele and A. J. McEvily: Eng. Fract. Mech., 8 (1976), 31.
51. R. K. Steele and A. J. McEvily: Titanium and Titanium Alloys, Vol. 1, ed. by J.C. Williams and A. F. Belov, Plenum Press, (1982), 589.
52. N. E. Paton, J. C. Williams, J. C. Chesnutt and A. W. Thompson: AGARD spring meeting, Brussels, (1975).
53. J. T. Fourie: Philos. Mag., 17 (1968), 735.
54. I. R. Kramer, C. R. Fong and B. Wu: Mater. Sci. Eng., 80 (1986), 37.
55. M. McClinton and J. B. Cohen: ONR TR-3 contract N 000 14-80-C-116, (1981).
56. O. Umezawa and K. Ishikawa: Mater. Sci. Eng., A176 (1994), 397.
57. O. Umezawa, K. Nagai and K. Ishikawa: Tetsu-to-Hagané, 76 (1990), 924, in Japanese.
58. H. Kitagawa, S. Takahashi, C. M. Suh and S. Miyashita: Fatigue Mechanisms, ASTMSTP 675, Philadelphia, (1978), 420.
59. O. Umezawa, K. Nagai and K. Ishikawa: Mater. Sci. Eng., A129 (1990), 223.
60. H. M. Kim, H. G. Paris and J. C. Williams: Titanium '80, Vol. 3, ed. by H. Kimura and O. Izumi, AIME, NY, (1980), 1825.
61. J. C. Williams and G. Luetjering: Titanium '80 Science and Technology, Vol. 1, ed. by H. Kimura and O. Izumi, AIME, NY, (1980), 671.