Studies on tribology

Proceedings of the Japan Academy Series B: Physical and Biological Sciences

Volumn 84, Issue 8, 2008, Pages 287-320

  Hori, Yukio ^a   Kato, Koji ^b  

^a KANAZAWA INSTITUTE OF TECHNOLOGY   (Japan)

^b NIHON UNIVERSITY   (Japan)

Author keywords

Heat generation; Hydrodynamic lubrication; Journal bearing; K model; Nitrogen lubrication; Oil whip; Static friction; Temperature rise; Tribo coated indium lubrication; Tribo layer; Water lubrication; Wear

Indexed keywords

REVIEW; THEORETICAL MODEL; VIBRATION;

MODELS, THEORETICAL; VIBRATION;

EID: 54349115728     PISSN: 03862208     EISSN: 13492896     Source Type: Journal    
DOI: 10.2183/pjab.84.287     Document Type: Review

References (85)

1. Hori, Y. (1959) A theory of oil whip. Trans. ASME, Ser. E, J. Appl. Mech. 26, 189-198.
2. Hori, Y. (1958) Oil whip. J. JSME 61, 1348-1356 (in Japanese).
3. Hori, Y., Hasuike, A., Higashi, T. and Nagase, Y. (1975) A study on foil bearings - An application to tape memory devices-. Proc. of 1975 Joint ASME-JSME Applied Mechanics Western Conference, Honolulu, Hawaii, March 24-27, pp. 121-125. #D-5. Bull. JSME 20-141 (1977-3) pp. 381-387.
4. Hori, Y., Kato, T. and Narumiya, H. (1981) Rubber surface squeeze film. Trans. ASME, J. Lubrication Tech. 103, 398-405.
5. Kim, K.W., Tanaka, M. and Hori, Y. (1983) A three-dimensional analysis of thermohydrodynamic performance of sector-shaped, tilting-pad thrust bearings. Trans. ASME, J. Lubrication Tech. 105, 406-413.
6. Mitsui, J., Hori, Y. and Tanaka, M. (1986) An experimental investigation on the temperature distribution in circular journal bearings. Trans. ASME, J. Lubrication Tech. 108, 621-627.
7. Kato, T. and Hori, Y. (1983) Turbulent lubrication theory using k-" Model for journal bearings. J. Japan Soc. Lubrication Eng. 28, 907-914 (in Japanese).
8. Hori, Y. (2006) Hydrodynamic Lubrication. Springer-Verlag.
9. Newkirk, B.L. and Taylor, H.D. (1925) Shaft whipping due to oil action in journal bearings. General Electric Review, 559-568.
10. Newkirk, B.L. and Lewis, J.F. (1956) Oil film whirl - An investigation of disturbances due to oil films in journal bearings. Trans. ASME 78, 21-27.
11. Newkirk, B.L. (1956) Varieties of shaft disturbances due to fluid films in journal bearings. Trans. ASME 78, 985-988.
12. Pinkus, O. (1956) Experimental investigation of resonant whip. Trans. ASME 78, 975-983.
13. Robertson, D. (1933) Whirling of a journal in a sleeve bearing. Phil. Mag. Ser. 7 15, 113-130.
14. Poritsky, H. (1953) A contribution to the theory of oil whip. Trans. ASME 75, 1153-1161.
15. Hori, Y. (1955) A theory of oil-whip in journal bearings. Proc. of the 5th Japan National Congress for Applied Mechanics, Sept. 1955, pp. 395-398.
16. Hori, Y. (1959) Study on oil whip. Dissertation, University of Tokyo (in Japanese).
17. Someya, T. (1963) Stabilität einer in zylindrischen Gleitlagern laufenden, unwuchtfreien Welle. Ingenieur-Archiv 33. Band, 2. Heft, 85-108.
18. Someya, T. (1964) Stability of a balanced shaft running in cylindrical journal bearings. Proc. Lubrication and Wear Second Convention, IMechE, London, paper 21, pp. 1-21.
19. Someya, T. (1965) Schwingungs- und Stabilitätsverhalten einer in zylindrischen Gleitlagern laufenden Welle mit Unwucht. VDI-Forschungsheft 510, 1-36.
20. Gotoda, H. (1963) Research on the vibration of a rotating shaft supported by journal bearings. Report of the Research Subcommittee on Radial Gasturbines, no. 4, JSME, pp. 114-206, Appendix pp. 207-244 (in Japanese).
21. Gotoda, H. (1964) On the vibration of a rotating shaft supported by journal bearings (first report, unbalance vibration. Trans. JSME 30, 887-900 (in Japanese).
22. Funakawa, M. and Tatara, A. (1964) Stability criterion of an elastic rotor in journal bearings. Trans. JSME 30, 1238-1244 (in Japanese).
23. Nakagawa, E. and Aoki, H. (1965) Approximate solution for elastic and damping properties of oil film in journal bearings. Trans. JSME 31, 1398-1408 (in Japanese).
24. Harada, M. and Aoki, H. (1971) The dynamic characteristics of fully circular journal bearings in the turbulent region. J. Japan Soc. Lubrication Eng. 16, 429-436 (in Japanese).
25. Hori, Y. (2003) Compilation of Manufacturers' Data.
26. Holmes, A.G., Ettles, C.M.McC. and Mayes, I.W. (1978) The dynamics of multi-rotor systems supported on oil film bearings. Trans. ASME, Ser. L, 100, 156-164.
27. Kikuchi, K., Takagi, M. and Kobayashi, S. (1979) Effect of alignment on vibration of multi-bearing rotor system (First report, vibration characteristics of three-bearing, one-rotor system). Trans. JSME 45, 1349-1356 (in Japanese).
28. Uematsu, R. and Hori, Y. (1980) Influence of misalignment of support journal bearings on stability of a multi-rotor system. Tribology International. 13, 249-252.
29. Nasuda, T. and Hori, Y. (1982) Influence of misalignment of support journal bearings on stability of multi-rotor systems. Proc. IFToMM Int. Conf. on Rotordynamic Problem in Power Plants, Rome, Sept. 1982, pp. 389-395.
30. Falkenhagen, G.L., Gunter, E.J. and Schuller, F.T. (1972) Stability and transient motion of a vertical three-lobe bearing system. J. Eng. Industry, Trans. ASME 94, 665-667.
31. Allaire, P.E. and Flack, R.D. (1980) Journal bearing design for high speed turbomachinery. In Bearing Design - Historical Aspects, Present Technology and Future Problems (ed. Anderson, W.J.). ASME Publication.
32. Li, D.F., Choy, K.C. and Allaire, P.E. (1980) Stability and transient characteristics of four multilobe journal bearing configurations. J. Luburication Tech., Trans. ASME 102, 291-299.
33. Hashimoto, H., Wada, S. and Tsunoda, H. (1984) Performance characteristics of elliptical journal bearings in turbulent flow regime. Bull. Japan Soc. Mech. Eng. 27-232, 2265-2271.
34. Tatara, A. (1969) An experimental study on the stabilizing effect of floating bush journal bearings. J. JSME 72, 1564-1569 (in Japanese).
35. Tanaka, M. and Hori, Y. (1972) Stability characteristics of floating bush bearings. Trans. ASME, Ser. F 94, 248-259.
36. Lund, J.W. (1964) Spring and damping coefficients for the tilting pad journal bearing. ASLE Trans. 7, 342-352.
37. Orcutt, F.K. (1967) The steady-state and dynamic characteristics of the tilting-pad journal bearing in laminar and turbulent flow regimes. Trans. ASME, J. Lub. Tech. 89, 392-404.
38. Iida, S. (1974) A study on the vibration characteristics of tilting pad journal bearings. Trans. JSME 40, 875-884 (in Japanese).
39. Hashimoto, H., Wada, S. and Marukawa, T. (1985) Performance characteristics of large scale tiltingpad journal bearings. Bull. Japan Soc. Mech. Eng. 28-242, 1761-1768.
40. Hori, Y. (1988) Anti-earthquake considerations in rotordynamics. Proc. 4th IMechE International Conference on Vibrations in Rotating Machinery, Edinburgh, Sept. 1988, pp. 1-8.
41. Hori, Y. and Kato, T. (1989) Seismic effect on the stability of a rotor supported by oil film bearings. Trans. JSME, C 55, 611-617 (in Japanese).
42. Hori, Y. and Kato, T. (1990) Earthquake-induced instability of a rotor supported by oil film bearings. Trans. ASME, J. Vibration and Acoustics. 112, 160-165.
43. Adams, M.L., Adams, M.L. and Guo, J.-S. (1996) Simulations and experiments of the non-linear hysteresis loop for rotor-bearing instability. Proc. IMechE International Conference on Vibrations in Rotating Machinery. Oxford, pp. 309-319.
44. Kato, T., Koguchi, K. and Hori, Y. (1991) Seismic response of a multirotor system supported by oil film bearings. Trans. JSME, C 57, 3761-3768 (in Japanese).
45. Kato, T., Matsuoka, H. and Hori, Y. (1992) Seismic response of a multirotor system supported by oil film bearing (Effect of misalignment). Trans. JSME, C 58, 1572-1578 (in Japanese).
46. Kato, T., Koguchi, K. and Hori, Y. (1992) Seismic response of a linearly stable multirotor system. Proc. IMechE International Conference on Vibrations in Rotating Machinery, Bath, June, 1992, pp. 7-11.
47. Kato, T., Matsuoka, H. and Hori, Y. (1993) Seismic response of a linearly stable, misaligned multi-rotor system. Tribology Transaction, S.T.L.E. 36, 311-315.
48. Dowson, D. (1962) A generalized Reynolds equation for fluid film lubrication. Int. J. Mech. Sci. 4, 159-170.
49. Wilcock, D.F. (1950) Turbulence in high-speed journal bearings. Trans. ASME 72, 825-834.
50. Constantinescu, V.N. (1959) On turbulent lubrication. Proc. Inst. Mech. Eng. 173, 881-900.
51. Ng, C.-W. and Pan, C.H.T. (1965) A linearized turbulent lubrication theory. J. Basic Eng., Trans. ASME, Ser. D 87, 675-688.
52. Orcut, F.K. and Arwas, E.B. (1967) The steady-state and dynamic characteristics of a full circular bearing and a partial arc bearing in the laminar and turbulent flow regimes. J. Lubrication Tech., Trans. ASME, Ser. F 89, 143-153.
53. Elrod, H.G. Jr. and Ng, C.W. (1967) A theory of turbulent fluid films and its application to bearings. J. Lubrication Tech., Trans. ASME, Ser. F 89, 346-362.
54. Jones, W.P. and Launder, B.E. (1973) The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence. Int. J. Heat Mass Transfer 16, 1119-1130.
55. Hassid, S. and Poreh, M. (1978) A turbulent energy dissipation model for flows with drag reduction. J. Fluids Eng., Trans. ASME 100, 107-112.
56. Kato, K. (2001) Water lubrication of ceramics. Proc. of 2nd World Achievements Tribology Conference, Scientific Industrial Applications Future Challenges, Vienna, pp. 51-58.
57. Lebeck, A.O. (1987) Parallel sliding load support in the mixed friction regime Part1 - The experimental data. J. Tribology, ASME 109-1, 189-195.
58. Wang, X., Kato, K., Adachi, K. and Aizawa, K. (2003) Loads carrying map for the surface texture design of SiC thrust bearing sliding in water. Tribology International 36, 189-197.
59. Adachi, K., Otsuka, K., Wang, X. and Kato, K. (2006) Effects of surface texture on water lubrication properties of advanced ceramics. J. Japan Soc. Abrasive Tech. 50, 107-110.
60. 4 and SiC under water lubrication. Tribology Letters 11, 23-28.
61. 4 sliding in water. Wear 250, 246-255.
62. Xu, J. and Kato, K. (2000) Formation of tribochemical layer of ceramics sliding in water and its role for low friction. Wear 245, 61-75.
63. Umehara, N., Endo, H. and Kato, K. (2001) Water lubrication mechanism in sliding of SiC on itself. Proc. of the International Tribology Conference Nagasaki, 2000 2, pp. 863-868.
64. Umehara, N., Tatsuno, M. and Kato, K. (2001) Nitrogen lubricated sliding between CNx coatings and ceramic balls. Proc. of the International Tribology Conference Nagasaki, 2000 2, pp. 1007-1012.
65. 2 - lubrication of carbon nitride coatings: A review. Wear 254, 1062-1069.
66. 2 lubrication. Proc. of the 31st Leeds-Lyon Symposium on Tribology, 2004, Leeds, UK, Tribology and Interface Engineering Series, 48 (eds. Dowson, D. et al.), Elsevier, pp. 673-677.
67. Ito, K., Martin, J.M., Minfray, C. and Kato, K. (2007) Formation mechanism of a low friction ZDDP tribofilm on iron oxide. STLE Transactions 50, 1-6.
68. Ito, K., Martin, J.M., Minfray, C. and Kato, K. (2006) Low friction tribofilm formed by the reaction of ZDDP on iron oxide. Tribology International 39, 1538-1544.
69. Kato, K., Furuyama, H. and Mizumoto, M. (1990) The fundamental properties of tribo-coating films in ultra high vacuum. Proc. of the Japan International Tribology Conference Nagoya, 1990 1, pp. 261-266.
70. Adachi, K. and Kato, K. (2000) Reliable design of space system in tribology viewpoint. Proc. of the 22nd International Symposium on Space Technology and Science 1, 593-598.
71. Adachi, K. and Kato, K. (2008) In-situ and On-demand Lubrication by Tribo-coating for Space Applications. J. Eng. Tribology, IMechE (to be published).
72. Kato, K. (2002) Classification of wear mechanisms/ models. Proc. Inst. Mech. Eng. Part J, J. Eng. Tribology 216, 349-355.
73. Kato, K. and Hokkirigawa, K. (1985) Abrasive wear diagram. Proc. of Eurotrib '85 - International Congress on Tribology 4, 1-5.
74. Hokkirigawa, K. and Kato, K. (1989) Theoretical estimation of abrasive wear resistance based on microscopic wear mechanism. Wear of Materials, ASME, 1-8.
75. Akagaki, T. and Kato, K. (1988) Simulation of flow wear in boundary lubrication using a Vickers indentation method. STLE Tribology Transactions 31, 311-316.
76. Akagaki, T. and Kato, K. (1987) Plastic flow process of surface layers in flow wear under boundary lubricated conditions. Wear 117, 179-196.
77. Adachi, K., Kato, K. and Chen, N. (1997) Wear map of ceramics. Wear 203-204, 291-301.
78. Diao, D.F., Kato, K. and Hayashi, K. (1992) The local yield map of hard coating under sliding contact. Thin films in tribology. Proc. of the 19th Leeds-Lyon Symposium on Tribology, Leeds, UK, 1991, Tribology Series 25 (eds. Dowson, D. et al.), Elsevier, pp. 419-427.
79. Kato, K. (1995) Microwear mechanisms of coatings. Surface and Coating Technology 76-77, 469-474.
80. Kato, K., Koide, H. and Umehara, N. (1998) Microwear mechanisms of thin hard coatings sliding against diamond tip of AFM. Adv. Info. Storage Sys., 289-302.
81. Wang, D. F. and Kato, K. (2003) Nano-scale fatigue wear of carbon nitride coating: Part II - Wear Properties. Trans. ASME, J. Tribology 125, 430-436.
82. Kayaba, T. and Kato, K. (1978) Experimental analysis of junction growth with a junction model. Wear 51, 105-116.
83. Kayaba, T. and Kato, K. (1978) Theoretical analysis of junction growth. The Technology Reports of the Tohoku University 43-1, 1-10.
84. Liu, J., Oba, K., Kato, K. and Inooka, H. (1995) Partial slip visualization at contact surface with the correlation method. J. Visual. Soc. Japan 15, 47-53 (in Japanese).
85. Adachi, K., Kato, K., Liu, J. and Kawamura, H. (2004) The effect of contact morphology on initiation and propagation of micro-slip at contact interface. Proc. of the ASME/STLE International Joint Tribology Conference, TRIB2004-64389.