Determination of cadmium, copper and lead in mineral coal using solid sampling graphite furnace atomic absorption spectrometry

Spectrochimica Acta - Part B Atomic Spectroscopy

Volumn 56, Issue 10, 2001, Pages 1859-1873

  Vale, M G R ^a   Silva, M M ^a   Welz, B ^b   Lima, E C ^a  

^a FEDERAL UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

^b FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

Author keywords

Cd, Cu, Pb determination; Coal analysis; Electrothermal atomic absorption spectrometry; Ru permanent modifier; Solid sampling

Indexed keywords

ABSORPTION; ATOMS; CADMIUM; COPPER; LEAD; METALLURGICAL FURNACES; RESONANCE; SAMPLING; TRACE ELEMENTS;

ELECTROTHERMAL ATOMIC ABSORPTION SPECTROMETRY; SOLID SAMPLING;

SPECTROMETRY;

EID: 0035980207     PISSN: 05848547     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0584-8547(01)00336-6     Document Type: Article

References (51)

1. Modern methods in bituminous coal analysis: Trace elements
2. Trace impurities in coal by wet chemical methods
3. ICP-MS determination of 45 trace elements in whole coal using microwave-oven acid digestion for sample preparation
4. Determination of 17 trace elements in coal and ash reference materials by ICP-MS applied to milligram sample sizes
5. Trace element analysis in high-purity graphite following open-focused microwave assisted digestion
6. Graphite furnace atomic absorption determination of Cu, Mn and Ni in coal after sample dissolution by alkaline fusion
7. Direct atomic spectrometric analysis by slurry atomisation, Part 1. Optimisation of whole coal analysis by inductively coupled plasma atomic emission spectrometry
8. Direct atomic spectrometric analysis by slurry atomisation, Part 3. Whole coal analysis by inductively coupled plasma atomic emission spectrometry
9. Direct atomic spectrometric analysis by slurry atomisation, Part 7. Analysis of coal using inductively coupled plasma mass spectrometry
10. Direct atomic spectrometric analysis by slurry atomisation, Part 2. Elimination of interference's in the determination of arsenic in whole coal by electrothermal atomisation atomic absorption spectrometry
11. Direct atomic spectrometric analysis by slurry atomisation, Part 4. Determination of selenium in coal by electrothermal atomisation atomic absorption spectrometry
12. Rapid slurry analysis of solid coal and fly ash samples
13. Direct determination of beryllium in coal slurries using graphite furnace atomic absorption spectrometry with automatic injection
14. Determination of gallium in coal and coal fly ash by electrothermal atomic absorption spectrometry using slurry sampling and nickel chemical modification
15. Slurry sampling graphite furnace atomic absorption spectrometry: Determination of trace metals in mineral coal
16. Direct analysis of solids by ultrasonic slurry electrothermal vaporization inductively coupled plasma mass spectrometry
17. Analyte transport studies of aqueous solutions and slurry samples using electrothermal vaporization ICP-MS
18. Determination of As, Mn, Pb and Se in coal by slurry electrothermal vaporization inductively coupled plasma mass spectrometry
19. Direct analysis of solids by atomic absorption spectrophotometry
20. Determination of heavy metals in environmental reference materials using solid sampling graphite furnace AAS
21. Solid sampling in electrothermal atomic absorption spectrometry using commercial atomizers
22. Influence of slurry preparation on the accuracy of ultrasonic slurry electrothermal atomic absorption spectrometry
23. Direct atomic spectrometric analysis by slurry atomisation, Part 10. Use of na air-ashing stage in electrothermal atomic absorption spectrometry
24. Automated ultrasonic mixing accessory for slurry sampling into a graphite furnace atomic absorption spectrometer
25. Feasibility of isotope dilution calibration for the determination of thallium in sediment using slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry
26. Direct analysis of solid samples by graphite furnace atomic absorption spectrometry with a transversely heated graphite atomizer and D2-background correction system (SS-GF AAS)
27. Direct analysis of solid samples by GFAAS - Determination of trace heavy metals in barytes
28. The stabilized temperature platform furnace
29. Calibration in solid sampling analysis
30. Chemical modification in graphite furnace atomic absorption spectrometry
31. Palladium and magnesium nitrates, a more universal modifier for graphite furnace atomic absorption spectrometry
32. Palladium nitrate-magnesium nitrate modifier for electrothermal atomic absorption spectrometry, Part 5. Performance for the determination of 21 elements
33. Analysis of solid samples by graphite furnace atomic absorption spectrometry using Zeeman background correction
34. Modification by palladium in the analysis of slurries by graphite furnace atomic absorption spectrometry: A physical mechanism
35. Investigations of interferences in graphite furnace atomic absorption spectrometry using a dual-cavity platform, Part 1. Influence of nickel chloride on the determination of antimony
36. Investigations of interferences in graphite furnace atomic absorption spectrometry using a dual-cavity platform, Part 2. Influence of sodium chloride and nickel chloride on the atomization of lead
37. Monte Carlo study of analyte desorption, adsorption and spatial distribution in electrothermal atomizers
38. Sequestration of volatile element hydrides by platinum group elements for graphite furnace atomic absorption
39. In situ concentration of metallic hydride in a graphite furnace coated with palladium - Determination of bismuth, germanium and tellurium
40. Long-term stability of a mixed palladium-iridium-trapping reagent for in situ hydride trapping within a graphite electrothermal atomizer
41. Evaluation of tungsten-rhodium coating on an integrated platform as a permanent chemical modifier for cadmium, lead and selenium determination by electrothermal atomic absorption spectrometry
42. Determination of Ag, Pb and Sn in aqua regia extracts from sediments by electrothermal atomic absorption spectrometry using Ru as a permanent modifier
43. Mechanisms of action of platinum group modifiers in electrothermal atomic absorption spectrometry
44. Permanent modification in electrothermal atomic absorption spectrometry - Advances, anticipations and reality
45. The contents and some related aspects of trace elements in coals
46. General aspects of the graphite furnace solid sampling method
47. Determination of trace impurities in powdered molybdenum metal and molybdenum silicide by solid sampling GFAAS
48. Electrothermal atomic absorption spectrometry using an improved solid sampling system for the analysis of high purity tantalum powders