Effects of reinforcement particle size in MMCs on extrusion die wear

Wear

Volumn 265, Issue 11-12, 2008, Pages 1741-1750

  Karamiş, M Baki ^a   Nair, Fehmi ^a  

^a Engineering Faculty   (Turkey)

Author keywords

Abrasive wear; Die wear; Extrusion die; Metal matrix composites

Indexed keywords

ABRASION; BEARINGS (STRUCTURAL); BILLETS (METAL BARS); CARBON FIBER REINFORCED PLASTICS; DIES; EXTRUDERS; EXTRUSION; EXTRUSION DIES; FORMING; GRAIN SIZE AND SHAPE; HIGH ENERGY FORMING; HOT WORKING; METAL WORKING; METALLIC MATRIX COMPOSITES; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; REINFORCEMENT; SILICON CARBIDE; SURFACE ROUGHNESS; SURFACES; TRIBOLOGY;

AA 6063; ABRASIVE WEAR; AISI H13; AL MATRIX COMPOSITES; ALUMINIUM MATRIX COMPOSITES; BEARING SURFACES; COMPOSITE BILLETS; CONSTANT VOLUMES; CRITICAL SIZES; DIE WEAR; DIE WORN; EXTRUDATE; EXTRUSION PROCESSES; EXTRUSION RATIOS; HOT WORKING DIE STEELS; LABORATORY CONDITIONS; METAL MATRIX COMPOSITES; MICROCUTTING; RAM SPEEDS; REINFORCEMENT PARTICLES; SIC PARTICLE SIZES; SIC PARTICLES; SIC PARTICULATES; STIR CASTING METHODS; WEAR MECHANISMS; WEIGHT LOSSES;

METAL EXTRUSION;

EID: 54149109341     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2008.04.044     Document Type: Article

References (31)

1. Goswami R.K., Sikand R., Dhar A., Grover O.P., Jindal U.C., and Gupta A.K. Extrusion characteristics of aluminium alloy/SiCp metal matrix composites. Materials Science Technology 15 (1999) 443-449
2. Lieblich M., Doncen G.G., Aveda P., Ibanez J., Torrabla M., and Caruana G. Extrudability of PM 2124/SiCp aluminium matrix composite. Journal of Materials Science Letters 16 (1997) 726-728
3. 3/20p composites. Metallurgical and Materials Transactions A 27A (1996) 4095-4110
4. Dutta B., Samajdar I., and Surappa M.K. Particle redistribution and matrix microstructure evaluation during hot extrusion of cast SiCp reinforced aluminium alloy matrix composites. Materials Science and Technology 14 (1998) 36-46
5. Herba E.M., and Mc Queen H.J. Extrusion modelling of 6061 aluminium alloy and particle reinforced MMCs. Materials Science and Technology 14 (1998) 1057-1064
6. 3 composites. Materials Science and Technology 14 (1998) 1029-1038
7. 4C particle reinforced 6061 aluminium matrix composite. Journal of Materials Science Letters 15 (1996) 385-387
8. Hanada K., Murakoshi Y., Negishi H., and Sano T. Microstructures and mechanical properties of Al-Li/SiCp composite produced by extrusion processing. Journal of Materials Processing Technology 63 (1997) 405-410
9. Hashim J., Loney L., and Hashmi M.S.J. Metal matrix composites: production by the stir casting method. Journal of Materials Processing Technology 92-93 (1999) 1-7
10. Torralba J.M., da Costa C.E., and Velasco F. P/M aluminum matrix composites: an overview. Journal of Materials Processing Technology 133 (2003) 203-206
11. Ahlatci H., Candan E., and Çimenoǧlu H. Abrasive wear behaviour and mechanical properties of Al-Si/SiC composites. Wear 257 (2004) 625-632
12. Candan E., Ahlatci H., and Çimenoǧlu H. Abrasive wear behaviour of Al-SiC composites produced by pressure infiltration technique. Wear 247 (2001) 133-138
13. Ibrahim I.A., Mohamed F.A., and Lavernia E.J. Particulate reinforced metal matrix composites-a review. Journal of Materials Science 26 (1991) 1137-2115
14. Das S., Mondal D.P., and Yegneswaran A.H. Effect of particle reinforcement on the upsetting and cold indirect extrusion behaviour of 2014 Al-alloy, advances in production and processing of aluminium (APPA 2001), pP08-4-1-13. Proceedings of the International Conference. Bahrain, February 12-15 (2001)
15. Chu H., Liu K.S., and Yeh J.W. An in situ composite of Al (graphite, Al4C3) produced by reciprocating extrusion. Materials Science and Engineering A 277 (2000) 25-32
16. 3p composites produced by reciprocating extrusion. Metallurgical and Materials Transactions A 31A (2000) 2000-2587
17. p/Al composites fabricated by melt-stirring. Composites Science and Technology 59 (1999) 643-654
18. Lawrence C.W., Mummery P.M., and Tweed J.H. Observations of extrusion-induced damage of metal-matrix composites. Journal of Materials Science Letters 12 (1993) 647-649
19. Jiang J., Collado C., Keeley D., and Dodd B. Room temperature formability of particle-reinforced metal matrix composites: forging, extrusion and deep drawing. Composites 26 (1995) 785-789
20. Li S.B., and Xie J.X. Processing and microstructure of functionally graded W/Cu composites fabricated by multi-billet extrusion using mechanically alloyed powders. Composites Science and Technology 66 (2006) 2329-2336
21. 3 composites. Journal of Materials Processing Technology 100 (2000) 53-62
22. Zhou J., and Duszczyk J. Prevention of stick-slip tearing of a Duralcan AA 6061-matrix composite during extrusion. Journal of Materials Science Letters 17 (1988) 1617-1619
23. Poudens A., Bacroix B., and Bretheau T. Influence of microstructures and particle concentrations on the development of extrusion textures in metal matrix composites. Materials Science and Engineering A 196 (1995) 219-228
24. Bin Z.L., Jintao H., and Yanwen W. Plastic working and superplasticity in aluminium-matrix composites reinforced with SiC particulates. Journal of Materials Processing Technology 84 (1998) 271-273
25. Lim L.G., and Dunne F.P.E. Modelling central bursting in the extrusion of particulate reinforced metal matrix composite materials. International Journal of Machine Tools and Manufacture 37 (1997) 901-915
26. Tham L.M., Gupta M., and Cheng L. Effect of limited matrix-reinforcement interfacial reaction on enhancing the mechanical properties of aluminium-silicon carbide composites. Acta Materialia 49 (2001) 3243-3253
27. p composite extrusion, Ph.D. Thesis, Erciyes University, Kayseri, 2005.
28. Kim Y., and Lee J.C. Processing and interfacial bonding strength of 2014 Al matrix composites reinforced with oxidized SiC particles. Materials Science and Engineering A 420 (2006) 8-12
29. Jeong J.H., Kim Y., and Lee J.C. Mechanical properties of 2014Al/SiC composites with oxidized SiC particle. Metallurgical and Materials Transactions A 34 (2003) 1361-1369
30. M.B. Karami{dotless}ş, The analyses of the wear behaviours of tillage tool steels, Ph.D. Thesis, Erciyes University, Kayseri, 1985.
31. Morsi K., McShane H.B., and McLean M. Effect of particle size and volume fraction on hot extrusion reaction synthesis of SiC particle reinforced NiAl. Metallurgical and Materials Transactions A 31A (2000) 1163-1670