Salt fog evaluation of RTV SIR coatings with different fillers

IEEE Transactions on Power Delivery

Volumn 23, Issue 4, 2008, Pages 2270-2277

  Siderakis, Kyriakos G ^a   Agoris, Demosthenes P ^a   Gubanski, Stanislaw M ^b  

^a UNIVERSITY OF PATRAS   (Greece)

^b CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

Fillers; Room temperature vulcanized (RTV) silicone rubber (SIR) coatings; Salt fog testing

Indexed keywords

ANGLE MEASUREMENT; COATINGS; CONTACT ANGLE; ELASTOMERS; ELECTRIC DISCHARGES; ELECTRIC INSULATORS; FIBER OPTICS; FILLERS; FOG; LEAKAGE CURRENTS; RUBBER; RUBBER TESTING; SILICA; SILICON COMPOUNDS; SILICONE COATINGS; SILICONES; SURFACE DISCHARGES; SURFACES; THERMAL CONDUCTIVITY; THERMOELECTRICITY; WATER POLLUTION;

INITIAL LOSSES; MATERIAL DETERIORATIONS; MATERIAL SURFACES; ROOM TEMPERATURE VULCANIZED (RTV) SILICONE RUBBER (SIR) COATINGS; RTV SIR COATINGS; SALT FOG TESTING; SALT FOGS; SILICONE RUBBERS; SURFACE ACTIVITIES;

RUBBER COATINGS;

EID: 54049147715     PISSN: 08858977     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPWRD.2008.2002857     Document Type: Article

References (24)

1. R. S. Gorur, E. A. Cherney, and J. T. Burnham, Outdoor Insulators. Phoenix, AZ: Ravi S. Gorur, 1999.
2. R. Hackam, "Outdoor HV composite polymeric insulators," IEEE Trans. Dielectr. Electr. Insul., vol. 6, no. 5, pp. 557-585, Oct. 1999.
3. R. S. Gorur, "Accomplishments and future challenges for outdoor insulation systems under contaminated conditions," presented at the Int. Symp. High Voltage Engineering, Bangalore, India, Aug. 2001.
4. E. A. Cherney and R. S. Gorur, "RTV silicone rubber coatings for outdoor insulators," IEEE Trans. Dielectr. Electr. Insul., vol. 6, no. 5, pp. 605-611, Oct. 1999.
5. IEEE DEIS Soc., Outdoor Service Environment Committee S-32-3, "Protective coatings for improving contamination performance of outdoor high voltage ceramic insulators," IEEE Trans. Power Del., vol. 10, no. 2, pp. 924-933, Apr. 1995.
6. E. A. Cherney, R. Hackam, and S. H. Kim, "Porcelain insulator maintenance with RTV silicone rubber coatings," IEEE Trans. Power Del., vol. 6, no. 3, pp. 1177-1181, Jul. 1991.
7. A. W. Adamson, Physical Chemistry of Surfaces, 5th ed. New York: Wiley, 1990.
8. J. P. Reynders, I. R. Jandrell, and S. M. Reynders, "Review of aging and recovery of silicone rubber insulation for outdoor use," IEEE Trans. Dielectr. Electr. Insul., vol. 6, no. 5, pp. 620-631, Oct. 1999.
9. J. E. Mark, Physical Properties of Polymers. New York: AIP, 1996, Handbook.
10. S. H. Kim, E. A. Cherney, and R. Hackam, "Effects of filler level in RTV silicone rubber coatings used in HV insulators," IEEE Trans. Elect. Insul., vol. 27, no. 6, pp. 1065-1072, Dec. 1992.
11. H. Homma, T. Kuroyagi, K. Izumi, C. L. Mirley, J. Ronzelo, and S. A. Boggs, "Diffusion of low molecular weight siloxane from bulk to surface," IEEE Trans. Dielectr. Electr. Insul., vol. 6, no. 3, pp. 370-375, Jun. 1999.
12. H. Deng, R. Hackam, and E. A. Cherney, "Role of the size of particles of alumina trihydrate filler on the life of RTV silicone rubber coating," IEEE Trans. Power Del., vol. 10, no. 2, pp. 1012-1024, Apr. 1995.
13. S. H. Kim, E. A. Cherney, and R. Hackam, "Suppresion mechanism of leakage current on RTV coated porcelain and silicone rubber insulators," IEEE Trans. Power Del., vol. 6, no. 4, pp. 1549-1556, Oct. 1991.
14. H. Deng, R. Hackam, and E. A. Cherney, "Influence of thickness, substrate type, amount of silicone fluid and solvent type on the electrical performance of RTV silicone rubber coatings," IEEE Trans. Power Del., vol. 11, no. 1, pp. 431-443, Jan. 1996.
15. L. H. Meyer, R. Omranipour, S. H. Jayaram, and E. A. Cherney, "The effect of ATH and silica on tracking and erosion resistance of Silicone rubber compounds for outdoor insulation," presented at the Conf. Rec. Electrical Insulation, Boston, MA, Apr. 2002.
16. R. Omranipour, L. H. Meyer, S. H. Jayaram, and E. A. Cherney, "Tracking and errosion resistance of RTV silicone rubber: Effect of filler particle size and loading," presented at the Annu. Rep. Conf. electrical insulation and dielectric phenomena, Cancun, Quintana Roo, Mexico, 2002.
17. T. G. Gustavsson, "Silicone rubber insulators - Impacts of material formulation in coastal environment," Ph.D. dissertation, Chalmers Univ. Technol., Goteborg, Sweden, 2002.
18. H. Hillborg and U. W. Gedde, "Hydrophobicity changes in silicone rubbers," IEEE Trans. Dielectr. Electr. Insul., vol. 6, no. 5, pp. 703-717, Oct. 1999.
19. J. H. Lienhard, A Heat Transfer Textbook, 3rd ed.: Phlogiston, 2001.
20. R. A. Serway, Physics for Scientists and Engineers, ser. Saunders Golden Sunburst, 3rd ed. Philadelphia, PA: Saunders, 1990.
21. F. Kreith, Principles of Heat Transfer. New York: Harper & Row, 1972.
22. L. H. Meyer, E. A. Cherney, and S. H. Jayaram, "The role of inorganic fillers in silicone rubber for outdoor insulation - Alumina tri-hydrate or silica," IEEE Elect. Insul. Mag., vol. 20, no. 4, pp. 13-21, Jul./Aug. 2004.
23. L. H. Meyer, S. H. Jayaram, and E. A. Cherney, "Thermal conductivity of filled silicone rubber and its relationship to erosion resistance in the inclined plane test," IEEE Trans. Dielect. Elect. Insul., vol. 11, no. 4, pp. 620-630, Aug. 2004.
24. E. A. Cherney, "Silicone rubber dielectrics modified by inorganic fillers for outdoor high voltage insulation applications," IEEE Trans. Dielect. Elect. Insul., vol. 12, no. 6, pp. 1108-1115, Dec. 2005.