Shear bond strength of composite bonded to Er,Cr:YSGG laser-prepared dentin

Photomedicine and Laser Surgery

Volumn 26, Issue 5, 2008, Pages 495-500

  Gurgan, Sevil ^a   Kiremitci, Arlin ^a   Cakir, Filiz Yalcin ^a   Gorucu, Jale ^a   Alpaslan, Tugba ^a   Yazici, Esra ^a   Gutknecht, Norbert ^b  

^a HACETTEPE UNIVERSITY   (Turkey)

^b RWTH AACHEN UNIVERSITY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ABS RESINS; BOND STRENGTH (MATERIALS); CHROMIUM; DENTAL CEMENT; DIAMONDS; ERBIUM; RESINS; SHEAR STRENGTH; SPEED; STATISTICAL TESTS; STRENGTH OF MATERIALS;

ADHESIVE SYSTEMS; BOND STRENGTHS; COMPOSITE RESINS; DENTIN BOND STRENGTHS; DISTILLED WATERS; ER ,CR:YSGG LASERS; HUMAN MOLARS; HYBRID COMPOSITES; IN VITRO STUDIES; MULTIPLE COMPARISON TESTS; POWER LEVELS; RESIN COMPOSITES; SHEAR BOND STRENGTH TESTS; SHEAR BOND STRENGTHS; THERMOCYCLING;

LASERS;

RESIN;

ARTICLE; CHROMIUM YSGG LASER; DENTIN; DEVICE; ERBIUM YAG LASER; HUMAN; IN VITRO STUDY; MOLAR TOOTH; SHEAR STRENGTH;

COMPOSITE RESINS; DENTAL BONDING; DENTAL ETCHING; DENTIN; HUMANS; LASERS, SOLID-STATE; ORGAN CULTURE TECHNIQUES; SHEAR STRENGTH;

EID: 54049119212     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2007.2213     Document Type: Article

References (37)

1. Van Meerbeek, B., De Munck, J., Yoshida, Y., et al. (2003). Adhesion to enamel and dentin: current status and future challenges. Oper. Dent. 28, 215-235.
2. Peumans, M., Kanumilli, P., De Munck, J., Landuyt, V., Lambrechts, P., and Van Meerbeek, B. (2005). Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent. Mater. 21, 864-881.
3. De Munck, J., Van Meerbeek, B., Yudhira, R., Lambrechts, P., and Vanherle, G. (2002). Micro-tensile bond strength of two adhesives to erbium:YAG-lased vs. bur-cut enamel and dentin. Eur. J. Oral. Sci. 110, 322-329.
4. Trajtenberg, C.P., Pereira, P.N.R., and Powers, J.M. (2004). Resin bond strength and micromorphology of human teeth prepared with an erbium:YAG laser. Am. J. Dent. 17, 331-336.
5. Van Meerbeek, B., Munck, J.D., Mattar, D., Landuyt, K.V., and Lambrechts, P. (2003). Microtensile bond strengths of an etch & rinse and self-etch adhesive to enamel and dentin as a function of surface treatment. Oper. Dent. 28, 647-660.
6. Lee, B.S., Lin, P.Y., Chen, M.H., Hsieh, T.T., Lin, C.P., Lai, J.Y., and Lan, W.H. (2006). Tensile bond strength of Er,Cr:YSGG laser-irradiated human dentin and analysis of dentin-resin interface. Dent. Mater. 23, 570-578.
7. Hossain, M., Nakamura, Y., Tamaki, Y., Yamada, Y., Murakami, Y., and Matsumoto, K. (2003). Atomic analysis and Knoop hardness measurement of the cavity floor prepared by Er,Cr:YSGG laser irradiation in vitro. J. Oral. Rehabil. 30, 515-521.
8. Hibst, R., and Keller, U. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances measurement of the ablation rate. Lasers Surg. Med. 9, 338-344.
9. Keller, U., and Hibst, R. (1989). Experimental studies of the application of the Er:YAG laser on dental hard substances: light microscopic and SEM investigations. Lasers Surg. Med. 9, 345-351.
10. Visuri, S.R., Walsh, J.T., and Wigdor, H.A. (1996). Erbium laser ablation of dental hard tissue: effect of water cooling. Lasers Surg. Med. 18, 294-300.
11. Kameyama, A., Kawada, E., Takizawa, M., Oda, Y., and Hι‴ rai, Y. (2000). Influence of different acid conditioners on the tensile bond strength of 4-META/MMA-TBB resin to Er:YAG laser-irradiated bovine dentin. J. Adhesive Dent. 2, 297-304.
12. Armengol, V., Jean, A., Rohanizadeh, R., and Hamel, H. (1999). Scanning electron microscopic analysis of diseased and healthy dental hard tissues after Er:YAG laser irradiation: in vitro study. J. Endod. 25, 543-546.
13. Chimello-Sousa, D.T., de Sousa, A.E., Chinelatti, M.A., Pecora, J.D., Palma-Dibb, R.G., and Corona, S.A.M. (2006). Influence of Er,Cr:YSGG laser irradiation distance on the bond strength of a restorative system to enamel. J. Dent. 34, 245-251.
14. Sung, E.C., Chenard, T., Caputo, A.A., Amodeo, M., and Chung, E.M. (2005). Composite resin bond strength to primary dentin prepared with Er,Cr:YSGG laser. J. Clin. Pediatr. Dent. 30, 45-49.
15. Eversole, L.R., and Rizoiu, I.M. (1995). Preliminary investigations on the utility of an erbium, chromium YSGG laser. J. Can. Dent. Assoc. 23, 41.
16. Hossain, M., Nakamura, Y., Yamada, Y., Murakami, Y., and Matsumo, K. (2002). Microleakage of composite resin restoration in cavities prepared by Er,Cr:YSGG laser irradiation and etched bur cavities in primary teeth. J. Clin. Pediatr. Dent. 26, 263-268.
17. Hossain, M., Nakamura, Y., Yamada, Y., Kιmura, Y., Matsumoto, N., and Matsumo, K. (1999). Effects of Er,Cr:YSGG laser irradiation in human enamel and dentin ablation and morphological studies. J. Clin. Laser Med. Surg. 17, 155-159.
18. Bertrand, M.F., Semez, G., Leforestier, E., Muller-Bolla, M., Nammour, S., and Rocca, J.P. (2006). Er:YAG laser cavity preparation and composite resin bonding with a single-component adhesive system: relationship between shear bond strength and microleakage. Lasers Surg. Med. 10, 1-9.
19. Attrill, D.C., Farrar, S.R., King, T.A., Dickinson, M.R., Davies, R.M., and Blinkhorn, A.S. (2000). Er:YAG (λ = 2.9 μm) laser etching of dental enamel as an alternative to acid etching. Lasers Med. Sci. 15, 154-161.
20. Kataumi, M., Nakajima, M., Yamada, T., and Tagami, J. (1998). Tensile bond strength and SEM evaluation of Er:YAG laser irradiated dentin using dentin adhesive. Dent. Mater. 17, 125-138.
21. Lin, S., Caputo, A.A., Eversole, L.R., and Rizoιu, I. (1999). Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J. Prosthet. Dent. 82, 451-455.
22. Øilo, G. (1987). Adhesion of dental materials to dentin debonding tests, in: A. Thylstrup, S.A. Leach, and V. Quist (eds.). Dentine and Dentin Reactions in the Oral Cavity. Oxford: IRL Press Ltd., pp. 219-224.
23. Swift, E.J., Perdigao, J., and Heymann, H.O. (1995). Bonding to enamel and dentin: A brief history and state of the art. Quintessence Int. 26, 95-110.
24. Titley, K.C., Chernecky, R., Rossouw, P.E., and Kulkami, G.V. (1998). The effect of various storage methods and media on shear bond strengths of dental composite resin to bovine dentin. Arch. Oral Biol. 13, 305-311.
25. Buonocore, M.G. (1955). A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J. Dent. Res. 34, 849-853.
26. Fusayama, T. (1992). Total etch technique and cavity isolation. J. Esthet. Dent. 4, 105-109.
27. Stiesch-Scholz, M., and Hanning, M. (2000). In vitro study of enamel and dentin marginal integrity of composite and compomer restorations placed in primary teeth after diamond or Er:YAG laser cavity preparation. J. Adhesive Dent. 2, 213-222.
28. Aoki, A., Ishikawa, I., Yamada, T., et al. (1998). Comparison between Er:YAG laser and conventional technique for root caries treatment in vitro. J. Dent. Res. 77, 1404-1414.
29. De Munck, J., Yoshida, Y., Inoue, S., Vargas, M., Suzuki, K., Lambrects, P., and Vanherle, G. (2003). Four-year water degradation of total-etch adhesives bonded to dentin. J. Dent. Res. 82, 136-140.
30. Inoue, S., Vargas, M.A., Yoshida, Y., Lambrects, P., Vanherle, G., Sano, H., and Van Meerbeek, B. (2001). Microtensile bond strength of eleven contemporary adhesives to dentin. J. Adhesive Dent. 3, 237-245.
31. Ceballos, L., Toledano, M., Osorio, R., Tay, F.R., and Marshall, G.W. (2002). Bonding to Er-YAG-laser-treated dentin. J. Dent. Res. 81, 119-122.
32. Visuri, S.R., Gilbert, J.L., Wright, D.D., Wigdor, H.A., and Walsh, Jr. J.T. (1996). Shear strength of composite bonded to Er:YAG laser-prepared dentin. J. Dent. Res. 75, 599-605.
33. Sakakibara, Y., Ishimaru, K., and Takamizu, M. (1998). A study on bond strength to dentin irradiated by erbium:YAG laser. Japanese J. Cons. Dent. 41, 207-219.
34. Dunn, W.J., Davis, J.T., and Bush, A.C. (2005). Shear bond strength and SEM evaluation of composite bonded to Er:YAG laser prepared dentin and enamel. Dent. Mater. 21, 616-624.
35. Jordehi, A.Y., Ghasemi, A., Zadeh, M.M., and Fekrazad, R. (2007). Evaluation of microtensile bond strength of glass ionomer cements to dentin after conditioning with the Er,Cr:YSGG laser. Photomed. Laser Surg. 25, 402-406.
36. Esteves-Olivera, M., Zezell, D.M., Apel, C., Turbino, M.L., Aranha, C.C., Eduardo C.D.P., and Gutknecht, N. (2007). Bond strength of self-etching primer to bur cut, Er,Cr:YSGG, and Er:YAG lased dental surfaces. Photomed. Laser Surg. 25, 373-380.
37. Hossain, M., Nakamura, Y., Yamada, Y., Suzuki, N., Murakami, Y., and Matsumoto, K. (2001). Analysis of surface roughness of enamel and dentin after Er,Cr:YSGG laser irradiation. J. Clin. Laser Med. Surg. 19, 297-303.