Mechanical aspects of degree of cement bonding and implant wedge effect

Clinical Biomechanics

Volumn 23, Issue 9, 2008, Pages 1141-1147

  Yoon, Yong San ^a   Oxland, Thomas R ^b   Hodgson, Antony J ^b   Duncan, Clive P ^b   Masri, Bassam A ^b   Choi, Donok ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

^b UNIVERSITY OF BRITISH COLUMBIA   (Canada)

Author keywords

Debond; Polish; Stem; Taper; THA (total hip arthroplasty)

Indexed keywords

ALUMINA; BONE; CEMENT MANUFACTURE; CEMENTS; CYLINDERS (SHAPES); FAILURE ANALYSIS; FINITE ELEMENT METHOD; HIP PROSTHESES; QUALITY ASSURANCE; SHEAR STRENGTH; SHELLS (STRUCTURES); STAINLESS STEEL;

DEBOND; POLISH; STEM; TAPER; THA (TOTAL HIP ARTHROPLASTY);

BONE CEMENT;

BONE CEMENT;

ARTICLE; BIOMECHANICS; DIAPHYSIS; EQUIPMENT DESIGN; FEMUR SHAFT; IMPLANT; METAPHYSIS; PRIORITY JOURNAL; PROSTHESIS FAILURE; PROSTHESIS LOOSENING; PROSTHESIS MATERIAL; SHEAR STRENGTH; SURFACE PROPERTY; TOTAL HIP PROSTHESIS;

ADHESIVENESS; ARTHROPLASTY, REPLACEMENT, HIP; BONE CEMENTS; CEMENTATION; COMPUTER SIMULATION; ELASTIC MODULUS; FEMUR HEAD; HIP PROSTHESIS; MODELS, BIOLOGICAL; STRESS, MECHANICAL;

EID: 53649104320     PISSN: 02680033     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.clinbiomech.2008.05.003     Document Type: Article

References (35)

1. Albrektsson T., Carlsson A., Morberg P., and Wennerberg A. Directly bone-anchored implants: with special emphasis on the concepts of osseointegration in orthopedic surgery. Bone Implant Interface (1994) 97-120
2. Alfaro-Adrian J., Gill H.S., and Murray D.W. Cement migration after THR. A comparison of Charnley Elite and Exeter femoral stems using RSA. J. Bone Joint Surg. Br. 81 (1999) 130-134
3. Alfaro-Adrian J., Gill H.S., and Murray D.W. Should total hip arthroplasty femoral components be designed to subside? A radiostereometric analysis study of the Charnley Elite and Exeter stems. J. Arthroplasty 16 (2001) 598-606
4. Balu G.R., Noble P.C., Alexander J.W., and Vela V.L. The effect of intramedullary reaming on the strength of the cement/bone interface. Trans. Orthop. Res. Soc. 19 (1994) 797
5. Bean D.J., Convery F.R., Woo S.L., and Lieber R.L. Regional variation in shear strength of the bone-polymethylmethacrylate interface. J. Arthroplasty 2 (1987) 293-298
6. Berry D.J., Harmsen W.S., and Ilstrup D.M. The natural history of debonding of the femoral component from the cement and its effect on long-term survival of Charnley total hip replacements. J. Bone Joint Surg. Am. 80 (1998) 715-721
7. Bugbee W.D., Barrera D.L., Lee A.C., and Coventry F.R. Variations in shear strength of the bone-cement interface in the proximal femur. Trans. Orthop. Res. Soc. 17 (1992) 22
8. Collis D.K., and Mohler C.G. Comparison of clinical outcomes in total hip arthroplasty using rough and polished cemented stems with essentially the same geometry. J. Bone Joint Surg. Am. 84-A (2002) 586-592
9. Dall D.M., Learmonth I.D., Solomon M.I., Miles A.W., and Davenport J.M. Fracture and loosening of Charnley femoral stems. Comparison between first-generation and subsequent designs. J. Bone Joint Surg. Br. 75 (1993) 259-265
10. Dohmae Y., Bechtold J.E., Sherman R.E., Puno R.M., and Gustilo R.B. Reduction in cement-bone interface shear strength between primary and revision arthroplasty. Clin. Orthop. Relat. Res. (1988) 214-220
11. Fowler J.L., Gie G.A., Lee A.J., and Ling R.S. Experience with the Exeter total hip replacement since 1970. Orthop. Clin. North Am. 19 (1988) 477-489
12. Gardiner R.C., and Hozack W.J. Failure of the cement-bone interface: a consequence of strengthening the cement-prosthesis interface?. J. Bone Joint Surg. Br. 76 (1994) 49-52
13. Harris W.H. Is it advantageous to strengthen the cement-metal interface and use a collar for cemented components of total hip replacements. Clin. Orthop. 285 (1992) 67-72
14. Harris W.H. Long-term results of cemented femoral stems with roughened precoated surfaces. Clin. Orthop. Relat. Res. (1998) 137-143
15. Hoffman O.J. The brittle strength of orthotropic materials. Compos. Mater. 1 (1967) 200-206
16. Howie D.W., Middleton R.G., and Costi K. Loosening of matt and polished cemented femoral stems. J. Bone Joint Surg. Br. 80 (1998) 573-576
17. Jasty M., Maloney W.J., Bragdon C.R., O'Connor D.O., Haire T., and Harris W.H. The initiation of failure in cemented femoral components of hip arthroplasties. J. Bone Joint Surg. Br. 73 (1991) 551-558
18. Keller J.C., Lautenschlager E.P., Marshall Jr. G.W., and Meyer Jr. P.R. Factors affecting surgical alloy/bone cement interface adhesion. J. Biomed. Mater. Res. 14 (1980) 639-651
19. Lennon A.B., McCormack B.A., and Prendergast P.J. The relationship between cement fatigue damage and implant surface finish in proximal femoral prostheses. Med. Eng. Phys. 25 (2003) 833-841
20. Liu C., Green S.M., Watkins N.D., Gregg P.J., and McCaskie A.W. Some failure modes of four clinical bone cements. Proc. Inst. Mech. Eng. 215 (2001) 359-366
21. Malchau H., Herberts P., Eisler T., Garellick G., and Soderman P. The Swedish total hip replacement register. J. Bone Joint Surg. Am. 84-A Suppl. 2 (2002) 2-20
22. Mann K.A., Allen M.J., and Ayers D.C. Pre-yield and post-yield shear behavior of the cement-bone interface. J. Orthop. Res. 16 (1998) 370-378
23. Mann K.A., Mocarski R., Damron L.A., Allen M.J., and Ayers D.C. Mixed-mode failure response of the cement-bone interface. J. Orthop. Res. 19 (2001) 1153-1161
24. Norman T.L., Thyagarajan G., Saligrama V.C., Gruen T.A., and Blaha J.D. Stem surface roughness alters creep induced subsidence and 'taper-lock' in a cemented femoral hip prosthesis. J. Biomech. 34 (2001) 1325-1333
25. Pilliar R.M., Blackwell R., Macnab I., and Cameron H.U. Carbon fiber-reinforced bone cement in orthopedic surgery. J. Biomed. Mater. Res. 10 (1976) 893-906
26. Song H.N., Yoon Y.S., and Kil K.B. Shear bonding strength of cement-bone interface under compression. Proc. Korean Orthop. Res. Soc. 28 (2002) 5
27. Speirs A.D., Slomczykowski M.A., Orr T.E., Siebenrock K., and Nolte L.P. Three-dimensional measurement of cemented femoral stem stability: an in vitro cadaver study. Clin. Biomech. 15 (2000) 248-255
28. Sporer S.M., Callaghan J.J., Olejniczak J.P., Goetz D.D., and Johnston R.C. The effects of surface roughness and polymethylmethacrylate precoating on the radiographic and clinical results of the Iowa hip prosthesis. A study of patients less than 50 years old. J. Bone Joint Surg. Am. 81 (1999) 481-492
29. Stone J.L., Beaupre G.S., and Hayes W.C. Multiaxial strength characteristics of trabecular bone. J. Biomech. 16 (1983) 743-752
30. Vail T.P., Goetz D., Tanzer M., Fisher D.A., Mohler C.G., and Callaghan J.J. A prospective randomized trial of cemented femoral components with polished versus grit-blasted surface finish and identical stem geometry. J. Arthroplasty 18 (2003) 95-102
31. Verdonschot N., and Huiskes R. Mechanical effects of stem cement interface characteristics in total hip replacement. Clin. Orthop. Relat. Res. (1996) 326-336
32. Verdonschot N., and Huiskes R. Surface roughness of debonded straight-tapered stems in cemented THA reduces subsidence but not cement damage. Biomaterials 19 (1998) 1773-1779
33. Weinans H., Huiskes R., and Grootenboer H.J. Quantitative analysis of bone reactions to relative motions at implant-bone interfaces. J. Biomech. 26 (1993) 1271-1281
34. Wheeler J.P., Miles A.W., and Clift S.E. The influence of the stem-cement interface in total hip replacement - a comparison of experimental and finite element approaches. Proc. Inst. Mech. Eng. 211 2 (1997) 181-186
35. Wroblewski B.M., Siney P.D., and Fleming P.A. Triple taper polished cemented stem in total hip arthroplasty: rationale for the design, surgical technique, and 7 years of clinical experience. J. Arthroplasty 16 (2001) 37-41