A comprehensive estimation of kinetic parameters in lumped catalytic cracking reaction models

Fuel

Volumn 88, Issue 1, 2009, Pages 169-178

  Hernández Barajas, José Roberto ^a   Vázquez Román, Richart ^b   Felix Flores Ma G ^c  

^a UNIVERSIDAD JUÁREZ AUTÓNOMA DE TABASCO   (Mexico)

^b DEPARTAMENTO DE INGENIERÍA QUÍMICA   (Mexico)

^c UNIVERSIDAD AUTÓNOMA DE ZACATECAS   (Mexico)

Author keywords

Catalytic cracking; Distribution function; Kinetic modeling; Lumping

Indexed keywords

CATALYTIC CRACKING; DISTRIBUTION FUNCTIONS; KINETIC PARAMETERS; PARAMETER ESTIMATION; PROBABILITY; PROBABILITY DISTRIBUTIONS; RATE CONSTANTS;

BETA FUNCTIONS; CATALYTIC PROCESSING; CHEMICAL SPECIES; COMPREHENSIVE APPROACH; CRACKING REACTIONS; DISCRETIZATION; DISTRIBUTION FUNCTION; KINETIC MODELING; KINETIC MODELLING; LUMPING; NUMERICAL EVALUATIONS; PROBABILITY DISTRIBUTION FUNCTION;

CRACKING (CHEMICAL);

EID: 53549107735     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2008.07.023     Document Type: Article

References (54)

1. Hernández-Barajas J.R., Vázquez-Román R., and Salazar-Sotelo D. Multiplicity of steady states in FCC units: effect of operating conditions. Fuel 85 (2006) 849-859
2. Reif H.E., Kress R.F., and Smith J.S. How feeds affects cat cracker yields?. Petrol Refiner 40 (1961) 237
3. Kurihara H. Optimal control of fluid catalytic cracking processes, PhD dissertation, MIT, USA, 1967.
4. Ewell R.B., and Gadmer G. Design cat crackers by computer. Hydrocarbon Process April (1978) 125-134
5. Lin T.D. FCCU advanced control and optimization. Hydrocarbon Process April (1993) 107-114
6. McFarlane R.C., Reinman R.C., Bartee J.F., and Georgakis C. Dynamic simulation for model IV fluid catalytic cracking unit. Comput Chem Eng 17 (1993) 275-300
7. Lappas A.A., Iatridis D.K., and Vasalos I. Production of reformulated gasoline in the FCC unit. Effect of feedstock type on gasoline composition. Catal Today 50 (1999) 73-85
8. Blanding F.H. Reaction rates in catalytic cracking of petroleum. Ind Eng Chem 45 (1953) 1186-1197
9. Nace D.M., Voltz S.E., and Weekman V.W. Application of a kinetic model for catalytic cracking. Ind Eng Chem Process Des Develop 10 (1971) 530-537
10. Yen LC. Kinetic modelling of fluid catalytic cracking. AIChE Spring Nat Meet, April 2-6, Houston, Texas, 1987.
11. Lee L.S., Chen Y.W., Huang T.N., and Pan W.Y. Four-lump kinetic model for fluid catalytic cracking process. Canadian J Chem Eng 67 (1989) 615-619
12. Larocca M., Ng S., and de Lasa H. Fast catalytic cracking of heavy gas oils: modeling coke deactivation. Ind Eng Chem Res 29 (1990) 171-180
13. Corella J, Francés E. Analysis of the riser reactor of a fluid cracking unit. Fluid catalytic cracking II, ACS symposium series, vol. 452, 1991. p. 165-82.
14. Takatsuka T, Sato S, Morimoto Y, Hashimoto H. Resid FCC reaction model, AIChE Nat Meet, 1984.
15. Sugungun M.M., Kolesnikov I.M., Vinogradov V.M., and Kolesnikov S.I. Kinetic modeling of FCC process. Catal Today 43 (1998) 315-325
16. John T., and Wojciechowsky B.W. On identifying of the primary and secondary products of the catalytic cracking of neutral distillates. J Catal 37 (1975) 240-250
17. Gao J., Xu C., Lin S., Yang G., and Guo Y. Advanced model for gas-solid turbulent flow and reaction in FCC riser reactors. AIChE J 45 (1999) 2321-2356
18. Derouin C., Nevicato D., Forissier M., Wild G., and Bernard J.R. Hydrodynamics of riser units and their impact on FCC operation. Ind Eng Chem Res 36 (1997) 4504-4515
19. Jacob S.M., Gross B., Voltz S.E., and Weekman V.W. A lumping and reaction scheme for catalytic cracking. AIChE J 22 (1976) 701-713
20. Al-Khattaf S., and de Lasa H. The role of diffusion in alkyl-benzenes catalytic cracking. Appl Catal A: Gen 226 (2002) 139-153
21. Avila A.M., Bidabehere C.M., and Sedran U. Diffusion and adsorption selectivities of hydrocarbons over FCC catalysts. Chem Eng J 132 (2007) 67-75
22. Al-Sabawi M., Atias J.A., and de Lasa H. Kinetic modeling of catalytic cracking of gas oil feedstocks: Reaction and diffusion phenomena. Ind Eng Chem Res 45 (2006) 1583-1593
23. Quann R.J., and Jaffe S.B. Structure-oriented lumping: describing the chemistry complex hydrocarbon mixtures. Ind Eng Chem Res 31 (1992) 2483-2497
24. Dewachtere N.V., Santaella F., and Froment G.F. Application of a single-event kinetic model in the simulation of an industrial riser reactor for the catalytic cracking of vacuum gas oil. Chem Eng Sci 54 (1999) 3653-3660
25. Froment G.F. Single event kinetic modeling of complex catalytic processes. Catal Rev 47 (2005) 83-124
26. Kumar H., and Froment G.F. A generalized mechanistic kinetic model for the hydroisomerization and hydrocracking of long-chain paraffins. Ind Eng Chem Res 46 (2007) 4075-4090
27. Gupta R.K., Kumar V., and Srivastava V.K. A new generic approach for the modeling of fluid catalytic cracking (FCC) riser reactor. Chem Eng Sci 62 (2007) 4510-4528
28. Paraskos J.A., Shah Y.T., McKinney J.D., and Carr N.L.A. Kinematic model for catalytic cracking in a transfer line reactor. Ind Eng Chem Process Des Develop 15 (1976) 165-169
29. Arbel A., Huang Z., Rinard I.H., Shinnar R., and Sapre A.V. Dynamic and control of fluidized catalytic crackers. 1. Modeling of the current generation of FCC's. Ind Eng Chem Res 34 (1995) 1228-1243
30. Martin MP. Contribution a l'Étude des Élévateurs de Craquage Catalytique. Effects lies a l'Injection de la Charge, PhD dissertation, Institut National Polytechnique de Lorraine, France, 1990.
31. Buchanan J.S. Analysis of heating and vaporization of feed droplets in fluidized catalytic cracking risers. Ind Eng Chem Res 33 (1994) 3104-3111
32. Ali H., and Rohani S. Dynamic modeling and simulation of a riser-type fluid catalytic cracking unit. Chem Eng Technol 29 (1997) 118-130
33. Mirgain C., Briens C., Pozo M.D., Loutaty R., and Bergougnou M. Modeling of feed vaporization in fluid catalytic cracking. Ind Eng Chem Res 39 (2000) 4392-4399
34. Maxwell J.B. Data book on hydrocarbons - application to process engineering (1950), Van Nostrand, Princeton, New Jersey
35. American Petroleum Institute (API). Technical data book petroleum refining. New York: EUA; 1997.
36. Sim W.J., and Daubert T.E. Prediction of vapor-liquid equilibria for undefined mixtures. Ind Eng Chem Process Des Dev 19 (1980) 356
37. Riazi M., and Daubert T. Simplify property predictions. Hydrocarbon Process 59 (1980) 115-116
38. Riazi M., and Daubert T. Prediction of thermophysical properties of petroleum fractions. Ind Eng Chem Res 26 (1987) 755-759
39. Froment G.F., and Bischoff K.B. Chemical reactor analysis and design (1990), John Wiley & Sons
40. Theologos K.N., and Markatos N.C. Advanced modeling of fluid catalytic cracking riser-type reactors. AIChE J 39 (1993) 1007-1017
41. Theologos K.N., Nikou I.D., Lygeros A.I., and Markatos N.C. Simulation and design of fluid catalytic cracking riser-type reactors. AIChE J 43 (1997) 486-494
42. Froment G.F. The modeling of catalyst deactivation by coke formation. In: Bartholomew C.H., and Butt J.B. (Eds). Catalyst deactivation 1991 (1991), Elsevier 53-83
43. Ahmed T. Equations of state and PVT analysis. Applications for improved reservoir modeling (2007), Gulf Publishing, Houston, USA [Chapter 2]
44. Krambeck F.J. Continuous mixtures in fluid catalytic cracking and extensions. Mobil workshop on chemical reaction of complex mixtures (1991), Van Nostrand, New York
45. Corella J., Bilbao R., Molina J.A., and Artigas A. Variation with time of the mechanism, observable order and activation energy of the catalyst deactivation by coke in the FCC process. Ind Eng Chem Process Dev 24 (1985) 625-636
46. Inoue S., Takatsuka T., Wada Y., Hirohama S., and Ushida T. Distribution function model for deep desulfurization of diesel fuel. Fuel 79 (2000) 843-849
47. Gupta P.L., and Gupta R.C. The monotonicity of the reliability measures of the beta distribution. Appl Math Lett 13 (2000) 5-9
48. Weekman V.W. A model of catalytic cracking conversion in fixed, moving and fluid bed reactors. Ind Eng Chem Process Des Develop 7 (1968) 90-95
49. Stewart W.E., Caracotsios M., and Sørensen J.P. Parameter estimation from multiresponse data. AIChE J 38 (1992) 641-650
50. Brenan K.E., Campbell S.L., and Petzold L.R. Numerical solution of initial-value problems in differential-algebraic equations (1989), North-Holland, New York
51. Ancheyta JJ. Estudio cinético de las reacciones de desintegración catalítica de gasóleos, PhD thesis, Universidad Autónoma Metropolitana, 1998.
52. Han I.S., Chung C.B., and Riggs J.B. Modeling of a fluidized catalytic cracking process. Comput Chem Eng 24 (2000) 1681-1687
53. Liguras D.K., and Allen D.T. Structural models for catalytic cracking. 2. Reactions of simulated oil mixtures. Ind Eng Chem Res 28 (1989) 674-683
54. Pitault I., Nevicato D., Forissier M., and Bernard J. Kinetic model on a molecular description for catalytic cracking of vacuum gas oil. Chem Eng Sci 49 (1994) 4249-4262