Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing

Journal of Materials in Civil Engineering

Volumn 20, Issue 10, 2008, Pages 659-667

  Kim, Yong Rak ^a   Lutif, Jamilla Sudo ^a   Bhasin, Amit ^b   Little, Dallas N ^c  

^a UNIVERSITY OF NEBRASKA LINCOLN   (United States)

^b TEXAS A AND M UNIVERSITY SYSTEM   (United States)

^c TEXAS A AND M UNIVERSITY   (United States)

Author keywords

Damage; Lime; Mixtures; Moisture; Pavements; Tests

Indexed keywords

AGGLOMERATION; AGGREGATES; ASPHALT; BITUMINOUS MATERIALS; ERROR ANALYSIS; FAILURE (MECHANICAL); FILLERS; GARNETS; HYDRATION; INDUSTRIAL MANAGEMENT; LIME; MECHANISMS; MIXTURES; MOISTURE; SILICA; SILICATE MINERALS; STRUCTURAL PANELS;

ASPHALT CONCRETE; ASPHALT MIXTURES; BONDING CHARACTERISTICS; BONDING ENERGIES; COMPONENT PROPERTIES; DAMAGE; DAMAGE RESISTANCE; FILLER ADDITION; HOT-MIX ASPHALT; LIME PARTICLES; LIME TREATMENT; MINERAL FILLERS; MIXTURE COMPONENTS; MOISTURE DAMAGE; MOISTURE DAMAGE RESISTANCE; PAVEMENTS; PERFORMANCE TESTING; PROPERTY MEASUREMENTS; SYNERGISTIC EFFECTS; TESTING DATA; TESTS; TOUGHENING EFFECTS;

HYDRATED LIME;

ASPHALT; CONCRETE; DAMAGE; MOISTURE; PAVEMENT;

EID: 52649094358     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2008)20:10(659)     Document Type: Article

References (36)

1. AASHTO. (1986). "Resistance of compacted bituminous mixture to moisture induced damage." T283, Washington, D.C.
2. Airey, G., Choi, Y., Collop, A., Moore, A., and Elliott, R. (2005). "Combined laboratory ageing/moisture sensitivity assessment of high modulus base asphalt mixtures." Asphalt Paving Technol. ZZZZZZ0066-9466, 74, 307-346.
3. Aschenbrener, T., McGennis, R. B., and Terrel, R. L. (1995). "Comparison of several moisture susceptibility tests to pavement of known field performance." Asph. Paving Technol. APATDV0270-2932, 64, 163-208.
4. Bhasin, A., and Little, D. N. (2007). "Characterization of aggregate surface energy using the universal sorption device." J. Mater. Civ. Eng. JMCEE70899-156110.1061/(ASCE)0899-1561(2007)19:8(634), 19(8), 634-641.
5. Bhasin, A., Little, D. N., Vasconcelos, K. L., and Masad, E. (2007). "Surface free energy to identify moisture sensitivity of materials for asphalt mixes." Transportation Research Record. 2001, Transportation Research Board, Washington, D.C., 37-45.
6. Bhasin, A., Masad, E., Little, D. N., and Lytton, R. (2006). "Limits on adhesive bond energy for improved resistance of hot-mix asphalt to moisture damage." Transportation Research Record. 1970, Transportation Research Board, Washington, D.C., 3-13.
7. Birgisson, B., Roque, R., and Page, G. C. (2003). "Ultrasonic purse wave velocity test for monitoring changes on hot-mix-asphalt mixture integrity from exposure to moisture." Transportation Research Record. 1832, Transportation Research Board, Washington, D.C., 173-181.
8. Birgisson, B., Roque, R., and Page, G. C. (2004). "Performance-based fracture criterion for evaluation of moisture susceptibility in hot-mix asphalt." Transportation Research Record. 1891, Transportation Research Board, Washington, D.C., 55-61.
9. Cheng, D., Little, D. N., Lytton, R. L., and Holste, J. C. (2003). "Moisture damage evaluation of asphalt mixture by considering both moisture diffusion and repeated load conditions." Transportation Research Record. 1832, Transportation Research Board, Washington, D.C., 42-58.
10. Cooley, L. A., Jr., Kandhal, P. S., Buchanan, M. S., Fee, F., and Epps, A. (2000). "Loaded wheel testers in the United States: State of the practice." Transportation Research E-Circular No. EC016, National Research Council, Washington, D.C.
11. Epps, J. A., Sebaaly, P. E., Penaranda, J., Maher, M. R., McCann, M. B., and Hand, A. J. (2000). "Compatibility of a test for moisture-induced damage with superpave volumetric mix design." NCHRP Rep. No. 444, Transportation Research Board, National Research Council, Washington, D.C.
12. Freitas, F. A. C. (2007). "A theoretical and experimental technique to measure fracture properties in viscoelastic solids." Ph.D. dissertation, Univ. of Nebraska, Lincoln, Neb.
13. Hefer, A. W., Bhasin, A., and Little, D. N. (2006). "Bitumen surface energy characterization using a contact angle approach." J. Mater. Civ. Eng. JMCEE70899-1561, accepted for publication.
14. Hefer, A. W., Little, D. N., and Lytton, R. L. (2005). "A synthesis of theories and mechanisms of bitumen-aggregate adhesion including recent advances in quantifying the effects of water." Electron. J. Assoc. Asph. Paving Technol. ZZZZZZ1553-5576, 74, 139-196.
15. Hicks, R. G. (1991). "Moisture damage in asphalt concrete." NCHRP Synthesis of Highway Practices, No. 175, Transportation Research Board, National Research Council, Washington, D.C.Hicks, R. G. (1991). "Moisture damage in asphalt concrete." NCHRP Synthesis of Highway Practices, No. 175, Transportation Research Board, National Research Council, Washington, D.C.
16. Huang, S., Robertson, R. E., Branthaver, J. F., and Petersen, J. C. (2005). "Impact of lime modification of asphalt and freeze-thaw cycling on the asphalt-aggregate interaction and moisture resistance damage." J. Mater. Civ. Eng. JMCEE70899-156110.1061/ (ASCE)0899-1561(2005)17:6(711), 17(6), 711-718.
17. Kanitpong, K., and Bahia, H. U. (2003). "Role of adhesion and thin film tackiness of asphalt binders in moisture damage of HMA." Asph. Paving Technol. APATDV0270-2932, 72, 502-528.
18. Kassem, E., Masad, E., Bulut, R., and Lytton, R. L. (2006). "Measurements of moisture suction and diffusion coefficient in hot-mix asphalt and their relationships to moisture damage." Transportation Research Record. 1970, Transportation Research Board, Washington, D.C., 45-54.
19. Kim, Y., Little, D. N., and Lytton, R. L. (2003). "Fatigue and healing characterization of asphalt mixtures." J. Mater. Civ. Eng. JMCEE70899-156110.1061/(ASCE)0899-1561(2003)15:1(75), 15(1), 75-83.
20. Kim, Y., Little, D. N., and Lytton, R. L. (2004). "Effect of moisture damage on material properties and fatigue resistance of asphalt mixtures." Transportation Research Record. 1832, Transportation Research Board, Washington, D.C., 48-54.
21. Kringos, N., and Scarpas, A. (2005). "Raveling of asphaltic mixes due to water damage: Computational identification of controlling parameters." Transportation Research Record. 1929, Transportation Research Board, Washington, D.C., 79-87.
22. Little, D. N., and Bhasin, A. (2006). "Using surface energy measurements to select materials for asphalt pavement." Final Rep. for Project No. 9-37, Texas Transportation Institute, College Station, Tex.
23. Little, D. N., and Epps, J. A. (2001). "The benefits of hydrated lime in hot mix asphalt." Research Report, National Lime Association, Arlington, Va.
24. Lottman, R. P. (1978). "Predicting moisture-induced damage to asphaltic concrete." NCHRP Rep. No. 192, TRB National Research Council, Washington, D.C.
25. Lu, Q., and Harvey, J. T. (2006a). "Evaluation of Hamburg wheel-tracking device test with laboratory and field performance data." Transportation Research Record. 1970, Transportation Research Board, Washington, D.C., 25-44.
26. Lu, Q., and Harvey, J. T. (2006b). "Long-term effectiveness of antistripping additives: Laboratory evaluation." Transportation Research Record. 1970, Transportation Research Board, Washington, D.C., 14-24.
27. Lutif, J. E. S. (2007). "The use of fundamental properties of mixture constituents to evaluate moisture susceptibility of asphalt concrete mixtures." MS thesis, Univ. of Nebraska, Lincoln, Neb.
28. Lytton, R. L., Masad, A. E., Zollinger, C., Bulut, R., and Little, D. N. (2005). "Measurements of surface energy and its relationship with moisture damage." Technical Rep. No. FHWA/TX-05/0-4524-2, FHWA, Washington, D.C.
29. McCann, M., and Sebaaly, P. E. (2001). "Quantitative evaluation of stripping potential in hot-mix asphalt, using ultrasonic energy for moisture-accelerated conditioning." Transportation Research Record. 1767, Transportation Research Board, Washington, D.C., 48-59.
30. McCann, M., and Sebaaly, P. E. (2003). "Evaluation of moisture sensitivity and performance of lime in hot-mix asphalt." Transportation Research Record. 1832, Transportation Research Board, Washington, D.C., 09-16.
31. McCann, M., and Sebaaly, P. E. (2006). "Evaluating the performance of lime in hot mix asphalt mixtures." Proc., Conf. on Airfield and Highway Pavements: Meeting Today's Challenges with Emerging Technologies, ASCE, New York, 614-624.
32. Solaimanian, M., Fedor, D., Bonaquist, R., Soltani, A. and Tandon, V. (2006). "Simple performance test for moisture damage prediction in asphalt concrete." Asphalt Paving Technol. ZZZZZZ0066-9466, 75, 345-380.
33. Terrel, R. L., and Al-Swailmi, S. (1994). "Water sensitivity of asphalt-aggregate mixes: Test selection." Strategic Highway Research Program No. SHRP-A-403, National Research Council, Washington, D.C.
34. Tunnicliff, D. G., and Root, R. (1982) "Antistripping additives in asphalt concrete: State-of-the-art." Asph. Paving Technol. APATDV0270-2932, 51, 265-297.
35. Youtcheff, J., and Aurilio, V. (1997). "Moisture sensitivity of asphalt binders: Evaluation and modeling of the pneumatic adhesion test results." Proc., 42nd Annual Conf. of Canadian Technical Asphalt Association, Canadian Technical Asphalt Assoc., Ottawa, 180-200.
36. Zeng, M., and Ksaibati, K. (2003). "Evaluation of moisture susceptibility of asphalt mixtures containing bottom ash." Transportation Research Record. 1832, Transportation Research Board, Washington, D.C., 25-33.