Capabilities of finite element analysis and magnetic equivalent circuits for electrical machine analysis and design

PESC Record - IEEE Annual Power Electronics Specialists Conference

Volumn , Issue , 2008, Pages 4027-4033

  Yilmaz, Murat ^a,b   Krein, Philip T ^a,b  

^a IEEE

^b University of Illinois at Urbana Champaign   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHLORINE COMPOUNDS; EDDY CURRENTS; ELASTICITY; ELECTRIC NETWORK ANALYSIS; ELECTROMECHANICAL DEVICES; EQUIVALENT CIRCUITS; ERROR ANALYSIS; ERRORS; HYSTERESIS; INDUCTION MOTORS; MACHINE DESIGN; MAGNETIC LEAKAGE; MAGNETIC MATERIALS; MAGNETISM; MAGNETIZATION; MODAL ANALYSIS; NANOSTRUCTURED MATERIALS; NETWORKS (CIRCUITS); POWER ELECTRONICS; REVERBERATION; SATURATION MAGNETIZATION; THREE DIMENSIONAL;

ANALYSIS METHODS; ANALYTICAL APPROACHES; ANALYTICAL MODELLING; ELECTRICAL MACHINES; ELECTROMECHANICAL FORCES; EXPERIMENTAL MEASUREMENTS; FAST COMPUTATION TIME; FINITE ELEMENT ANALYSIS; HYSTERESIS LOSSES; IRON LOSSES; MAGNETIC EFFECTS; MAGNETIC EQUIVALENT CIRCUITS; MAGNETIC SATURATION; MAGNETIC VECTOR POTENTIAL; NETWORK MODELLING; NON-LINEAR MODELING; REDUCED MODELS; SIMULATION TOOLS;

FINITE ELEMENT METHOD;

EID: 52349094231     PISSN: 02759306     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/PESC.2008.4592584     Document Type: Conference Paper

References (101)

1. E.S. Hamdi, "Design of Small Electrical Machines", Chichester: John Wiley & Sons, 1998.
2. G. Veinott, "Theory and Design of Small Induction Motors," New York: McGraw-Hill, 1959.
3. P. L. Alger, "Induction Machines, Their Behavior and Uses" New York: Gordon and Breach Science, 1970.
4. T. A. Lipo, "Introduction to AC Machine Design," Madison: Wisconsin Power Electronics Research Center, University of Wisconsin-Madison, 2004.
5. P. P. Silvester and M. V. K. Chari, "Finite Element Solution of Saturable Magnetic Field Problems," IEEE Trans. Power Appl. System, Vol. 89, pp. 1642-1651, 1970.
6. A. Arkkio, "Analysis of induction motors based on the numerical solution of the magnetic field and circuit equations," Acta Polytechn. Scand. Electr. Eng. Ser. [Online], pp. 7-62. Available: http://lib.hut.fi/ Diss/198X/isbn951226076X.
7. C. C. Chan and K. T. Chau, "Design of electrical machines by the finite element method using distributed computing," Computers in Industry, vol. 17, pp. 367-374, Dec. 1991.
8. S. J. Salon, Finite Element Analysis of Electrical Machines. Norwell, MA: Kluwer academic Publishers, 1995.
9. T. W. Preston and J. P. Sturgess, "Implementation of The Finite-Element Method into Machine Design Procedures," in Proc. Int'l. Conf. Electric Machines and Drives, 1993, pp. 312-317.
10. E. R. Laithwaite, "Magnetic Equivalent Circuits for Electrical Machines," Proc. IEE, vol. 114, pp. 1805-1809, November 1967.
11. C. J. Carpenter, "Magnetic Equivalent Circuits," Proc. IEE, vol. 115, pp. 1503-1511, 1968.
12. V. Ostovic, "Magnetic equivalent circuit presentation of electric machines," Electric Machines and Power Systems, vol. 12, pp. 407-432, Jun. 1987.
13. Y. H. Kim, C. S. Jin, S. Kim, Y. D. Chun, and J. Lee, "Analysis of hybrid stepping motor using 3D equivalent magnetic circuit network method based on trapezoidal element," Journal of Applied Physics, Vol. 91, no. 10, pp. 8311-8313, 2002.
14. M. Amrhein, P. T. Krein, "Magnetic Equivalent Circuit Modeling of Induction Machines Design-Oriented Approach with Extension to 3-D," IEEE Int'l Electric Machines & Drives Conf., Vol. 2, pp. 1557-1563, May 2007.
15. S. J. Salon, D. W. Burow, R. E. Ashley, L. Ovacik, M. J. DeBortoli, "Finite Element Analysis of Induction Machines in the Frequency Domain," IEEE Trans. Magn., Vol. 29, no. 2, pp. 1438-1441, March 1993.
16. T. Yamaguchi, Y. Kawase, and S. Sano, "3-D Finite-Element Analysis of Skewed Squirrel-Cage Induction Motor," IEEE Trans. Magn., Vol. 40, no. 2, pp. 969-972, 2004.
17. C. D. Delforge, H. Henao, G. Ekwe, P. Brochet, G-A. Capolino, "Comparison of two Modeling Methods for Induction Machine Study: Application to Diagnosis," COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol.22, no.4, pp. 891-908, 2003.
18. Y. Ni, Q. Wang, X. Bao, W. Zhu, "Optimal Design of a Hybrid Excitation Claw-pole Alternator Based on a 3-D MEC Method," IEEE Proc. of the Eighth Int'l Conf. on Electrical Machines and Systems, Vol. 1, pp. 644-647, 2005.
19. H. Gholizad, M. Mirsalim, M. Mirzayee, I. A. Tsukerman, "Motional Eddy Currents Analysis in moving solid iron using magnetic equivalent circuits method," ACES, pp. 1-4, 2005.
20. M. Moallem, H. Nikkhajoei, M. Falahi, "Predicting the Performance of a Switched Reluctance Machine Using Improved Magnetic Equivalent Circuit Method," Proc. Int'l. Conf. Power Electronics Drive Systems, pp. 198-201, 1995.
21. T. Sun, J. Y. Lee, J. P. Hong, "Magnetic Field Analysis Using Magnetic Equivalent Circuit for the Initial Design of Toroidal Winding Switched Reluctance Motor," Int'l. Conf. Electrical Machines and Systems, ICEMS, vol. 3, pp. 2129 - 2132, 2005.
22. C. Delforge, B. Lemaire-Semail, "Induction Machine Modeling Using Finite Element and Permeance Network Methods", IEEE Trans. Magn., Vol. 31, pp. 2092-2095, 1995.
23. J. P. Wang, D. K. Lieu, W. L. Lorimer, and A. Hartman, "Comparison of Lumped Parameter and Finite Element Magnetic Modeling in a BLDC Motor," IEEE Trans. Magn., Vol. 33, no.5, pp. 4092-4094, September 1997.
24. J. Gyselinck, P. Dular and W. Legros, D. Grenier, "Hybrid Magnetic Equivalent Circuit - Finite Element Modelling of Transformer Fed Electrical Machines," COMPEL: Int'l. J. Computation and Mathematics in Electrical and Electronic Engineering, Vol.22, no.3, pp. 643-658, 2003.
25. C. Chillet, and J. Y. Voyant, "Design-Oriented Analytical Study of a Linear Electromagnetic Actuator by Means of a Reluctance Network," IEEE Trans. Magn., Vol. 37, pp. 3004-30011, 2001.
26. M. C. Tsai, C. C. Huang, and S. Y. Shen, "Analysis Method for Motor Characteristics with Three-Dimensional Flux Distribution," IEEE Trans. Magn., Vol. 40, pp. 443-450, 2004.
27. S. Lee, J. Hong, J. Lee, Y. Kwon, Y. Jo, S Baik, and J. Lee, "Parametric Design for Superconducting Synchronous Motor With 3D Equivalent Magnetic Circuit Network Model," IEEE Trans. Applied Superconductivity, vol. 17, pp. 1541-1544, 2007.
28. Y. Kano, T. Kosaka, and N. Matsui, "Simple Nonlinear Magnetic Analysis for Permanent-Magnet Motors," IEEE Trans. Industry Applications, vol.41, no.5, pp. 1205-1214, 2005.
29. C. G. Veinott, Theory and Design of Small Induction Motors. New York: Gordon and Breach Science, 1970.
30. C. G. Veinott, Computer-Aided Design of Electrical Machinery. Cambridge, Massachusetts: The MIT Press, 1972.
31. C. B. Rasmussen, E. Ritchie, "A Magnetic Equivalent Circuit Approach for Predicting PM Motor Performance," IEEE Industry Appl. Society Annual Meeting, pp. 10-17, New Orleans, 1997.
32. Y. Xiao, G. Slenion, M. Iravani, "Implementation of an Equivalent Circuit Approach to the Analysis of Synchronous Machines," IEEE Trans. Energy Conversion, Vol. 9, no. 4, pp. 717-723, 1994.
33. R. J. Hill-Cottingham, P. C. Coles, D. Rodger, and H. C. Lai, "Numerical Models of an Induction Machine," IEEE Trans. on Magnetics, Vol. 39, no. 3, pp. 1551-1553, 2003.
34. Y. Zhang, K. T. Chau, J. Z. Jiang, Dong Zhang, and Chunhua Liu, "A Finite Element-Analytical Method for Electromagnetic Field Analysis of Electric Machines With Free Rotation," IEEE Trans. on Magnetics, Vol. 42, no. 10, pp. 3392-3394, 2006.
35. J.R. Bumby, E. Spooner, M. Jagiela, "Equivalent Circuit Analysis of Solid-Rotor Induction Machines with Reference to Turbocharger Accelerator Applications," IEE Proc.-Electr. Power Appl., Vol.153, no. 1, pp. 31-39, 2006.
36. Scott D. Sudhoff, Dionysios C. Aliprantis, Brian T. Kuhn, and Patrick L. Chapman, "Experimental Procedure for Use with an Advanced Induction Machine Model," IEEE Trans. on Energy Conversion, Vol. 18, no. 1, pp. 48-56, 2003.
37. Kent Davey, "Predicting Induction Motor Circuit Parameters," IEEE Trans. Magn., Vol. 38, no. 4, pp. 1774-1779, July 2002.
38. D. Bispo, L. M. Neto, J. T. Resende, and D. A. Andrade, "A New Strategy for Induction Machine Modeling Taking Into Account the Magnetic Saturation," IEEE Trans. on Industry Appl, Vol. 37, no. 6, pp. 1710-1719, 2001.
39. C. C. Mi, G. R. Slemon, and R. Bonert, "Minimization of Iron Losses of Permanent Magnet Synchronous Machines," IEEE Trans. Energy Conversion, Vol. 20, no. 1, pp. 121-127, 2005.
40. Y. Nozaki, T. Yamaguchi, and T. Koseki, "Practical Equivalent Circuit Model of Linear Induction Motors for Urban Transportation System Depending on Secondary Speed Based on Electromagnetic Analysis," The University of Tokyo, Department of Electrical Engineering Report, Tokyo, 2006.
41. K. Davey, "Predicting Induction Motor Circuit Parameters", IEEE Trans. Magn., Vol. 38, no. 4, pp. 1774-1779, 2002.
42. C. B. Rajanathan and G. Hu, "Electromechanical Transient Characteristics of an Induction Actuator by FEA," IEEE Trans. on Magnetics, Vol. 29, no. 2, pp. 2001-2005, 1993.
43. F. Janet, J. L. Coulomb, C. Chillet, and P. Mas, "Magnetic Moment and Reluctance Network Mixed Method Applied to Transformer's Modeling," IEEE Trans. Magnetics, Vol. 41, no. 5, pp. 1428-1431, May 2005.
44. X. Li, Q. Wu, and S. Nandi, "Performance Analysis of a Three-Phase Induction Machine With Inclined Static Eccentricity," IEEE Trans. on Industry Appl., Vol. 43, no. 2, pp. 531-541, 2007.
45. K. R. Davey, "The Equivalent T Circuit of the Induction Motor: Its Nonuniqueness and Use to the Magnetic Field Analyst," IEEE Trans. Magnetics, Vol. 43, no. 4, pp. 1745-1748, April 2007.
46. Z. K. Papazacharopoulos, K. V. Tatis, A. G. Kladas, and S. N. Manias, "Dynamic Model for Harmonic Induction Motor Analysis Determined by Finite Elements", IEEE Trans. Energy Conversion, Vol. 19, no. 1, pp. 102-108, March 2004.
47. K. B. Tatis, A. G. Kladas, and J. A. Tegopoulos, "Harmonic Iron Loss Determination in Laminated Iron Cores by Using a Particular 3-D FEM," IEEE Trans. Magn., Vol. 40, pp. 860-863, 2004.
48. J. Chang, D. H. Kang, I. A. Viorel, and S. Larisa, "Transverse Flux Reluctance Linear Motor's Analytical Model Based on Finite-Element Method Analysis Results," IEEE Trans. Magn., Vol. 43, no. 4, pp. 1201-1204, April 2007.
49. L. Haydock, S. A. Holland, "Transient Analysis of Power Transformers Using Magnetic and Electric Equivalent Circuits," IEEE Trans. Magn., Vol. 30, no. 5, pp. 2996-2999, 1994.
50. V. Ostovic, "A Method for Evaluation of Transient and Steady State Performance in Saturated Squirrel Cage Induction Machines," IEEE Trans. Energy Conv., vol. 1, pp. 190-197, 1986.
51. V. Ostovic, "Computation of Saturated Permanent-Magnet AC Motor Performance by Means of Magnetic Circuits," IEEE Trans. Ind. Application, vol. 23, pp. 836-841, Sep.-Oct. 1987.
52. V. Ostovic, "A Simplified Approach to Magnetic Equivalent-Circuit Modeling of Induction Machines," IEEE Trans. Ind. Application, vol. 24, pp. 308-316, 1988.
53. V. Ostovic, "A Novel Method for Evaluation of Transient States in Saturated Electric Machines," IEEE Trans. Ind. Application, vol. 25, pp. 96-100, 1989.
54. V. Ostovic, "Dynamics of Saturated Electric Machines," New York: Springer-Verlag, 1989.
55. R. Qin, M.A.Rahman, "Magnetic Equivalent Circuit of PM Hysteresis Synchronous Motor," IEEE Trans. Magn., vol. 39, no. 5, pp. 2998-3000, 2003.
56. R. Leidhold, P. Mutschler, "Evaluation of Sensorless Methods for Synchronous-Linear-Motors by using a Magnetic Equivalent Circuit based Model," Proc. IEEE Int'l. Electric Machines & Drives Conf, IEMDC, pp. 386-391, 2007.
57. V. Ostovic, "Pole-Changing Permanent-Magnet Machines", IEEE Trans. Industry Applications, Vol. 3, no. 6, pp. 1493-1499, 2002.
58. L. S. Iribarnegaray and J. M. Roman, "Critical review of the analytical approaches accounting for interbar currents and experimental study of ageing in two-speed asynchronous motors for elevator drives," IEE Proc.-Electr. Power Appl., Vol. 152, no. 1, pp. 72-80, 2005.
59. A. Delale, L. Albert, L. Gerbaud, and F. Wurtz, "Automatic Generation of Sizing Models for the Optimization of Electromagnetic Devices Using Reluctance Networks," IEEE Trans. Magn., Vol. 40, no. 2, pp. 830-833, 2004.
60. E. Sarani, K. Abbaszadeh, M.Ardebili, "Modeling and Simulation of Turn-Fault and Unbalance Magnetic Pull in Induction Motor Based on Magnetic Equivalent Circuit Method," Proc Int'l Conf. on Electrical Machines and Systems, ICEM, pp. 52-56, 2005.
61. P. M. Leplat, B. L. Semail, and S. Clenet, and F. Piriou, "Comparison Between Finite Element Method and Magnetic Equivalent Scheme to Model an Induction Machine," COMPEL: The Int'l Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol.15, no.4, pp. 82-87, 1996.
62. T. J. Busch, T. A. Lipo, J. D. Law, "Magnetic Circuit Modeling of the Field Regulated RM Part II: Saturation Modeling and Results," IEEE Trans. Energy Conversion, Vol. 11, pp. 56-61, 1996.
63. J. Perho, "Reluctance Network for Analysing Induction Machines," Acta Polytechnica Scandinavica, Electrical Engineering Series, vol. 110, pp. 1-147, 2002.
64. P. Sewell, K. J. Bradley, J. C. Clare, P. W. Wheeler, A. Ferrah, and R. Magill, "Efficient Dynamic Models for Induction Machines," Intl. J. Numer. Model, vol. 12, pp. 449-464, 1999.
65. J. Hur, H. A. Toliyat, and J.-P. Hong, "3-D Time-Stepping Analysis of Induction Motor by New Equivalent Magnetic Circuit Network Method," IEEE Trans. Magn., vol. 37, pp. 3225-3228, 2001.
66. J. D. Law, T. J. Busch, and T. A. Lipo, "Magnetic Circuit Modelling of the Field Regulated Reluctance Machine. Part I: Model Development," IEEE Trans. Energy Conversion, vol. 11, pp. 49-55, 1996.
67. C. A. Hernandez-Aramburo, T. C. Green, and A. C. Smith, "Estimating Rotational Iron Losses in an Induction Machine," IEEE Trans. Magn., vol. 39, pp. 3527-3533, 2003.
68. S. D. Sudhoff, B. T. Kuhn, K. A. Corzine, and B. T. Branecky, "Magnetic Equivalent Circuit Modeling of Induction Motors"," IEEE Trans. Energy Conversion, Vol. 22, pp. 259-270, 2007.
69. M. Amrhein, "Induction Machine Performance Improvements Design-Oriented Approaches," Univ. Illinois, Tech. Rep. CEME-TR-2007-02, April 2007.
70. J. Cale, S. D. Sudhoff, and Li-Quan Tan, "Accurately Modeling EI Core Inductors Using a High-Fidelity Magnetic Equivalent Circuit Approach," IEEE Trans. Magn., Vol. 42, pp. 40-46, Jan. 2006.
71. M. Amrhein and P. T. Krein, "Three-Dimensional Magnetic Equivalent Circuit Modeling Approach of Induction Machines," IEEE Trans. Energy Conversion, submitted for review, May 2007.
72. Hur Koser, and J. H. Lang, "Magnetic Induction Micromachine-Part III: Eddy Currents and Nonlinear Effects," J. Microelectromechanical Systems, Vol. 15, pp. 440-456, 2006.
73. C. T. Liu, Y. H. Chiang, "Closed-Loop Electromagnetic Forces Calculations and Controls of a Noncontacting Industrial Steel Plate Conveyance System," IEEE Trans. Magn., Vol. 42, no. 4, pp. 1311-1314, April 2006.
74. J. Hur, S. B. Yoon, D. Y. Hwang, and D. S. Hyun, "Analysis of PMLSM Using 3D Equivalent Magnetic Circuit Network Method," IEEE Trans. Magn., vol. 33, no. 5, pp. 4143-4145, 1997.
75. J. Faiz, B. M. Ebrahimi, "Influence of Magnetic Saturation upon Performance of Induction Motor Using Time Stepping Finite Element Method," Electric Power Components and Systems, Vol. 35, pp.505-524, 2007.
76. L. Chang, "An Improved FE Inductance Calculation for Electrical Machines," IEEE Trans. Magn., Vol. 32, pp. 3237-3245, 1996.
77. H. Nam, S. K. Jung, G. H. Kang, J. P. Hong, T. Jung, and S. M. Baek, "Design of Pole-Change Single-Phase Induction Motor for Household Appliances," IEEE Trans. Industry Appl., Vol. 40, no. 3, pp. 780-788, 2004.
78. R. E. Clark, D. S. Smith, P.H. Mellor, D. Howe, "Design Optimisation of Moving-Magnet Actuators for Reciprocating Electro-Mechanical Systems," IEEE Trans. Magn., Vol. 31, no. 6, pp. 3746-3748, 1995.
79. P. Zhou, J. Gilmore, Z. Badics, and Z. J. Cendes, "Finite Element Analysis of Induction Motors Based on Computing Detailed Equivalent Circuit Parameters," IEEE Trans. Magn., Vol. 34, no. 5, pp. 3499-3502, 1998.
80. B. Brunelli, D. Casadei, U. Reggiani, G. Serra, "Transient and Steady-State Behaviour of Solid Rotor Induction Machines," IEEE Trans. Magn., MAG-19, no. 6, pp. 2650-2654, November 1983.
81. A. Bellini, O. Bottauscio, M. Chiampi, C. Tassoni, and M. Zucca, "Induction Motor Rotor Quantities at Load Conditions: Finite Element Analysis and Experimental Validation," IEEE Trans. Magn., Vol. 42, no. 10, pp. 3476-3478, 2006.
82. P. Zheng, P. Thelin, E. Nordlund, and C. Sadarangani, "Two-Dimentional Finite Element Method Simulation of a Four-Quadrant Transducer Prototype Machine Considering Skewed Slots," Journal of Applied Pyhsics, Vol OSR301, pp. 1-3, 2006.
83. T. W. Preston, A. B. J. Reece, P. S. Sangha, "Induction Motor Analysis by Time-Stepping Techniques," IEEE Trans. Magn., Vol. 24, no. 1, pp. 471-474, 1988.
84. M. Mirzaei, M. Mirsalim, and S. E. Abdollahi, "Analytical Modeling of Axial Air Gap Solid Rotor Induction Machines Using a Quasi-Three-Dimensional Method," IEEE Trans. Magn., Vol. 43, no. 7, pp. 3237-3242, 2007.
85. G. Díaz, C. G. Morán, P. Arboleya, and J. G. Aleixandre, "Analytical Interpretation and Quantification of Rotational Losses in Stator Cores of Induction Motors," IEEE Trans. Magn., Vol. 43, no. 10, pp. 3237-3242, 2007.
86. A. Stermecki, I. Ticar, and P. Kitak, "FEM-Based Design of an Induction Motors Part Winding to Reduce the Starting Current," IEEE Trans. Magn., Vol. 42, pp. 1299-1302, 2006.
87. K. Yamazaki, and Y. Haruishi, "Stray Load Loss Analysis of Induction Motor-Comparison of Measurement Due to IEEE Standard 112 and Direct Calculation by Finite-Element Method," IEEE Trans. Industry Appl., Vol. 40, no. 2, pp. 543-549, 2004.
88. M. Enokizono, H. Shimoji, and T. Horibe, "Loss Evaluation of Induction Motor by Using Magnetic Hysteresis Model," IEEE Trans. Magn., Vol. 38, no. 5, pp. 2379-2381, 2002.
89. S. Mezani, B. Laporte, and N. Takorabet, "Saturation and Space Harmonics in the Complex Finite Element Computation of Induction Motors," IEEE Trans. Magn., Vol. 41, no. 5, pp. 1460-1463, 2005.
90. C. H. Aramburo, T. C. Green, and S. Smith, "Assessment of Power Losses of an Inverter-Driven Induction Machine with Its Experimental Validation," IEEE Trans. Industry Appl., Vol. 39, no. 4, pp. 994-1004, 2003.
91. P. Campbell, M.V.K. Chari, and J. D'Angelo, "Three-Dimentional Finite Element Solution of Permanent Magnet Machines," IEEE Trans. Magn., MAG-17, no. 6, pp. 2997-2999, 1981.
92. J. Jeong, E. Lee, H. Cho, "Analysis of Transient State of the Squirrel Cage Induction Motor by Using Magnetic Equivalent Circuit Method," Proc. Intl. Conf. Electrical Machines and Systems, vol. 2, pp. 720-723, 2003.
93. K. J. Bradley, A. Tami, "Reluctance Mesh Modelling of Induction Motors with Healty and Faulty Rotors," IEEE Industry Appl. Conf., Thirty-First IAS Ann. Meeting, Vol. 1, pp. 625-632, 1996.
94. C. Gerada, K. J. Bradley, M. Sumner, P. Sewell, "Evaluation and Modeling of Cross Saturation Due to Leakage Flux in Vector-Controlled Induction Machines," IEEE Trans. Industry Appl., Vol. 43, no. 3, pp. 694-702, 2007.
95. P. J. McCleer, J. M. Miller, A. R. Gale, M. W. Degner, F. Leonardi, "Nonlinear Model and Momentary Performance Capability of a Cage Rotor Induction Machine Used as an Automotive Combined Starter-Alternator," Proc. IEEE Indus. Appl. Soc. Ann. Meet., pp. 502-508, 1999.
96. U.A. Ungku Amirulddin, G.M. Asher, P. Sewell and K.J. Bradley, "Dynamic field modelling of torque and radial forces in vector-controlled induction machines with bearing relief," IEE Proc. Electric Power Applications, Vol. 152, Issue 4, pp. 894-904, 2005.
97. T. Chevalier, A. K. Lebouc, B. Cornut and C. Cester, "Estimation of magnetic loss in an induction motor fed with sinusoidal supply using a finite element software and a new approach to dynamic hysteresis," IEEE Trans. Magn., Vol. 35, pp. 3400-3402, 1999.
98. L. Vandevelde, and J. A. Melkebeek, "Numerical Analysis of Vibrations of Squirrel-Cage Induction Motors based on Magnetic Equivalent Circuits and Structural Finite Element Models," IEEE Industry Appl. Conf., Thirty-Sixth IAS Ann. Meeting, pp. 2288-2295, 2001.
99. J. Hur, I. S. Jung, and D. S. Hyun, "Lateral Characteristic Analysis of PMLSM Considering Overhang Effect by 3 Dimensional Equivalent Magnetic Circuit Network Method," IEEE Trans. Magn., Vol. 34, no. 5, pp. 3528-3531, 1998.
100. I. S. Jung, J. Hur and D. S. Hyun, "Analysis of Permanent Magnet Linear Synchronous Motor for Servo System Using 3-D Equivalent Magnetic Circuit Network Method," Int'l Conf. Electrical Machines and Drives, IEMD'99, pp. 132-134, 1999.
101. J. K. Kim, S. W. Joo, S. C. Hahn, J. P. Hong, D. H. Kang, and D. H. Koo, "Static Characteristics of Linear BLDC Motor Using Equivalent Magnetic Circuit and Finite Element Method," IEEE Trans. Magn., Vol. 40, no. 2, pp. 742-745, 2004.