Reluctance network for analysing induction machines

Acta Polytechnica Scandinavica, Electrical Engineering

Volumn , Issue 110, 2002, Pages 1-147

  Perho, Jarmo ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Cage induction motor; Leakage reactance; Reluctance network; Single phase equivalent circuit; Starting

Indexed keywords

CALCULATIONS; COMPUTER SOFTWARE; DAMPING; EDDY CURRENTS; ELECTRIC CURRENT DISTRIBUTION; ELECTRIC MACHINERY TESTING; ELECTRIC NETWORK ANALYSIS; ELECTRIC RESISTANCE; EQUIVALENT CIRCUITS; MATHEMATICAL MODELS; ROTORS (WINDINGS); STATORS;

CAGE INDUCTION MOTOR; LEAKAGE REACTANCE; RELUCTANCE NETWORK;

INDUCTION MOTORS;

EID: 0036928802     PISSN: 00016845     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (69)

1. Agarwal, P., Alger P., 1961. Saturation factors for leakage reactance of induction motors. Transaction of AIEE, February 1961, pp. 1037-1042.
2. Ah-Jaco A., Makki A., Yahoui H., Grellet G., 1998. Modelling of the three phase asynchronous motor. Application to magnetic faults diagnostic. Proceedings of ICEM, Istanbul, Turkey, 2-4 September 1998, pp. 443-447.
3. Akbaba M., Fakhro S., 1987. Saturation effects in three-phase induction motors. Electrical Machines and Power Systems, 1987, No. 12, pp. 179-193.
4. Andresen E., Müller W., 1983. Berechnung der Anlaufdaten von Asynchron-Käfigläufermotoren verschiedener Stabformen mit der Methode der finiten Differenzen. Archiv für Elektrotechnik, 1983, Vol. 66, pp. 179-185.
5. Andresen E., Kruckow W., Pfeiffer R., The effect of air gap increase on mains and inverter supplied induction machines. Proceedings of International Conference on Evolution and Modern Aspects on Induction Machines, Torino, Italy, 8-11 July 1986, pp. 203-209.
6. Andria G., Dell'Aquila A., Salvatore L., 1986. Effect of saturation on harmonic impedances of inverter-fed induction motors. Proceedings of International Conference on Evolution and Modern Aspects on Induction Machines, Torino, Italy, 8-11 July 1986, pp. 115-122.
7. Angst G., 1963. Saturation factors for leakage reactance of induction motors with skewed rotors. IEEE Transactions on Power Apparatus and Systems, October 1963, pp. 716-725.
8. Arnold E., laCour J. L., 1909. Die Asynchronen Wechselstrommaschinen IV. Teil I. Verlag von Julius Springer, Berin Germany, 1909, 601 p.
9. Atallah K., Zhu Z., Howe D., 1992. The prediction of iron losses in brushless permanent magnet DC motors. Proceedings of ICEM, Manchester, United Kingdom, 15-17 September 1992, pp. 814-818.
10. Athani V., Walivadekar V., 1994. Equivalent circuit for switched reluctance motor. Electrical Machines and Power Systems, 1994, No. 22, pp. 533-543.
11. Atkins W., 1958. An improved electromagnetic analogue. Proceedings of IEE, 1958, Vol. 105C, pp. 151-154.
12. Beier E., 1964. Die Vorausberechnung der Betriebskennlinien der Asynchronmaschine unter Berücksichtigung der Eisensättigung. Dissertation, Müchen, Germany, 1964, 155 p.
13. Bolte E., 1981 Berechnung von Ausgleichsvorgängen beim Asynchronmotor mit Hochstabläufer unter Berücksichtigung der Stromverdrängung. Archiv für Elektrotechnik, 1981, Vol. 63, pp. 233-245.
14. Brown J., Kovacs K., Vas P., 1983. A method of including the effects of the main flux path saturation in the generalized equations of AC machines. IEEE Transactions on Power Apparatus and Systems, 1983, Vol. 102, No. 1, pp 96-103.
15. Chalmers B., Richardson J., 1966. Investigation of high-frequency no-load losses in induction motors with open stator slots. Proceedings of IEE, 1966, Vol. 113, No. 10, pp. 1597-1605.
16. Chalmers B., Dodgson R., 1969. Saturated leakage reactance of cage induction motors. Proceedings of IEE, 1969, Vol. 116, No. 8, pp. 1395-1404.
17. Ciosk K., Gierczak E., 1998. Analysis of electromagnetic field in a disk induction motor with double-sided stator and twin rotors using a 3-D reluctance network method. Proceedings of ICEM, Istanbul, Turkey, 2-4 September 1998, pp. 286-289.
18. Dudzikowski I., 1994. Method of calculating magnetic circuit of DC machines excited by permanent magnets. Proceedings of ICEM, Paris, France, 5-8 September 1994, pp. 571-576.
19. Ferreira De Jesus J., 1988. A model for saturation in induction machines. IEEE Transactions on Energy Conversion, 1988, Vol. 3, No. 3, pp. 682-687.
20. Fritz W., 1989. Magnetische Spannung im Städerjoch von Drehfeldmaschinen - Prüfung einer klassischen Theorie mit Hilfe eines numerischen Programms. ETZ Archiv, 1989, Vol. 11 No. 11, pp. 343-349.
21. Fujimaki T., Miyashita O., 1985. Calculation of characteristics of the inverter-fed squirrel-cage induction motor. Proceedings of EPE, Brussels, Belgium, 16-18 October 1985, pp. 3.357-3.362.
22. Gagnon R., Viarouge P., Kamwa I., Le-Huy H., 1993. Calculation method of saturated magnetic circuits for the CAD of electrical machines. Proceedings of IMACS-TCI, Montreal, Canada, 7-9 July 1993, pp. 613-618.
23. Ganji A., Guillaume P., Pintelon R., Lataire P., 1996. Identification of the induction motor dynamic and static inductance with regard to saturation. Proceedings of IEE - Power Electronics and Variable Speed Drives, 1996, pp. 42-47.
24. Gibbs W., 1947. Tooth-ripple losses in unwound pole-shoes. Journal of IEE, 1947, Vol. 94, Part 2, pp. 2-12.
25. Gibbs W., 1948. Induction and synchronous motors with unlaminated rotors. Journal of IEE, 1948, Vol. 95, pp. 411-420.
26. Gynt S., Schuisky W., 1958. Berechnung der magnetischen Spannung für Joch und Zähne. ETZ-A, 1958, vol. 79, No. 20, pp. 780-784.
27. Gyselinck J., Vandevelde L., Melkebeek J., 1998. Coupling finite elements and magnetic and electrical networks in magnetodynamics. Proceedings of ICEM, Istanbul, Turkey, 2-4 September 1998, pp. 1431-1436.
28. Hamels D., 1984. Application of different equivalent circuits in determining induction machine performance in practical situations. Proceedings of ICEM, Lausanne, Switzerland, 18-21 September 1984, pp. 380-383.
29. Hasuike K., 1984. A study of the reduction of harmonic rotor copper losses of the three-phase squirrel cage induction motor driven by inverter. Electrical Engineering in Japan, 1984, Vol. 104, No. 4, pp. 124-129.
30. Healey R., Williamson S., Smith A., 1994. Improved rotor models for vector controllers. IEEE IAS annual conference, Denver, 2-5 October 1994, pp. 1-10.
31. Hrusovsky F., Hrabovcova V., Investigation of iron loss and magnetic field distribution in inverter fed induction motor. Proceedings of Transcom, Zilina, Slovakia, 28-30 June 1995, pp. 153-156.
32. Iwata K., 1984. Influences of cast rotor slot size on a slot constant and motor characteristics. Electrical Engineering in Japan, 1984, Vol. 104, No. 5, pp. 65-74.
33. Jagiela K., 1985. Le facteur de deplacement d'un courant du moteur asynchrone profondement encoche alimente par l'onduleur thyristorique voltmetrique. Proceedings of EPE, Brussels, Belgium, 16-18 October 1985, pp. 3.81-3.87.
34. Jimoh A., Findlay R., Poloujadoff M., 1985. Stray losses in induction machines. Part I, definition, origin and measurement. Part II, calculation and reduction. IEEE Transactions on Power Apparatus and Systems, 1985 Vol. 104, No. 6, pp. 1500-1511.
35. Kamoun M., Poloujadoff M., 1986. Accounting for saturation and cross-saturation in a dynamic stability study. Electrical Power Systems Research, 1986, No. 10, pp. 55-61.
36. Levi E., 1997. General method of magnetising flux saturation modelling in d-q axis models of double-cage induction machines. Proceedings of IEE - Electrical Power Applications, 1997, Vol. 144, No. 2, pp. 101-109.
37. Li J-C., 1996. Analytical model of cross-magnetizing effect in saturated synchronous machines. Electric Power Systems Research, 1996, Vol. 37, pp. 19-28.
38. Luomi J., Niemenmaa A., Arkkio A., 1986. On the use of effective reluctivities in magnetic field analysis of induction motors fed from a sinusoidal voltage source. Proceedings of ICEM, München, Germany, 8-10 September 1986, pp. 706-709.
39. Löser F., Sattler Ph., 1986. Additional losses of induction motors - experimental results and better theoretical approach. Proceedings of ICEM, München, Germany, 8-10 September 1986, pp. 324-327.
40. Moriyasu S., Endo K., 1980. The ripple loss at the rotor surface of synchronous machines. IEEE Transactions on Power Apparatus and Systems, 1980, Vol. 99, November/December, pp. 2393-2399.
41. Mouly V., Subrahmanyam V., Rao G., 1983. Fluxes and currents in a skewed rotor induction motor. Electrical Machines and Power Systems, 1983, No. 8, pp. 233-245.
42. Mukherjee, S., Adams, G., Hoft, R., 1989. FEM analysis of inverter-induction motor, rotor conduction losses. IEEE Transactions on Energy Conversion, 1989, Vol. 4, No. 4, pp. 671-680.
43. Oberretl, K., 1963. Die Ermittlung von magnetischen Feldern, Wirbelströmen und Kräften in komplizierten Fällen durch Simulation an Gittermodellen. Archiv für Elektrotechnik, 1963, Vol. 48, No. 5, pp. 297-313.
44. Ostovic, V., 1989a. Dynamic of Saturated Electric Machines. Springer-Verlag, New York, USA, 1989, 445 p.
45. Ostovic, V., 1989b. A novel method for evaluation of transient states in saturated electric machines. IEEE Transactions on Industry Applications, 1989, Vol. 25, No. 1, pp. 194-199.
46. Paszek, W., 1981, Transientes Verhalten der Induktionsmaschine mit Hochstabläufer. Archiv für Elektrotechnik, 1981, Vol. 63, pp. 77-86.
47. Paszek, W., Pawelek, Z., 1984. Ersatzschaltung für transiente Vorgänge der Induktionsmaschine mit Keilstabläufer. Archiv für Elektrotechnik, 1984, Vol. 67, pp. 259-264.
48. Perho J., 1993. Oikosulkumoottorin sijaiskytkennän laskeminen reluktanssiverkolla. (Calculation of an equivalent circuit of cage-induction motor by reluctance network method, in Finnish). Licentiate Thesis, Helsinki University of Technology, Laboratory of Electromechanics, Espoo, Finland, Report 40, 1993, 74 p., (In Finnish).
49. Perho, J., Ritchie, E., 1995. A Motor operation analysis using reluctance net. Proceedings of Stockholm Power Tech Conference, Electrical Machines and Drives, Stockholm, Sweden, 18-22 June 1995, pp. 356-361.
50. Perho, J., Ritchie, E., 1996. Analysis of a permanent magnet machine using reluctance network. Proceedings of ICEM, Vigo, Spain, 10-12 September 1996, Vol. I, pp. 44-48.
51. Qishan G., 1986. Saturation harmonics in induction machines. Proceedings of International Conference on Evolution and Modern Aspects on Induction Machines, Torino, Italy, 8-11 July 1986, pp. 264-271.
52. Rasmussen, C. B., 1996. Modelling and simulation of surface mounted PM motors. PhD Thesis, Aalborg University, Institute of Energy Technology, Denmark, 1996, 206 p.
53. Rasmussen, C., Ritchie, E., 1997. Improved reluctance-mmf network for calculation of magnetic field distribution in surface-mounted permanent-magnet motors. Electromotion, 1997, No. 4, pp. 55-61.
54. Richter, E., Chari M., Tandon S., 1981. Studies of magnetic fields in electrical machines by means of finite element analysis. Electric Machines and Electromechanics, 1981, No. 4, pp. 297-306.
55. Richter R., 1936. Electrische Maschinen IV. Verlag von Julius Springer, Berlin, Germany, 1936, 440 p.
56. Richter R., 1951. Elektrische Maschinen I. Zweite Auflage, Verlag Birkhäuser, Basel, Germany, 1951, 630 p.
57. Roberts, J., 1960. Analogue treatment of eddy-current problems involving two-dimensional fields. Proceedings of IEE, 1960, Vol. 107C, pp. 11-18.
58. Roberts, J., 1962. Analogue treatment of eddy-currents and magnetic flux penetration in saturated iron. Proceedings of IEE, 1962, Vol. 109C, pp. 406-411.
59. Rogers, G., Benaragama, D., 1978. An induction motor model with deep-bar effect and leakage inductance saturation. Archiv für Electrotechnik, 1978, Vol. 60, pp. 193-201.
60. Savelainen, J., 1980. Analytical calculation of saturable leakage reactances of an induction motor. Electric Machines and Electromechanics, 1980, No. 5, pp. 211-224.
61. Sewell, P., Bradley, K., Clare J., Wheeler P., Ferrah, A., Magill R., Sunter S., 1998. Dynamic reluctance mesh modelling of induction motors. Proceedings of ICEM, Istanbul, Turkey, 2-4 September 1998, pp. 1324-1329.
62. Silvester, P., 1967. Network analog solution of skin and proximity effect problems. IEEE Transactions on Power Apparatus and Systems, 1967, Vol. 86, No. 2, pp. 241-247.
63. Sliwinski T., 1987. Electromagnetic field in slots of electrical machines. Journal of Prace Institutu Electrotechniki, 1987, Vol. 147, pp. 99-109.
64. Udayagiri, M., Lipo T., 1989. Simulation of inverter fed induction motors including core losses. Proceedings of IEEE Industrial Electronics Conference, Philadelphia, USA, 6-10 November 1989, Vol. I, pp. 232-237.
65. Vandevelde L., Gyselinck J., Melkebeek, J., 1998. Electromechanical analysis of vibrations and noise of squirrel-cage induction motors. Proceedings of ICEM, Istanbul, Turkey, 2-4 September 1998, pp. 496-501.
66. Vogt K., 1983. Elektrische Maschinen. VEB Verlag Technik, Berlin, Germany, 1983, 500 p.
67. Wang R., Gieras J., 1998. Analysis of characteristics of a permanent magnet hybrid linear stepping motor. Proceedings of ICEM, Istanbul, Turkey, 2-4 September 1998, pp. 833-838.
68. Weh H., 1957. Über die Berechnung magnetischer Spannungen in hochgesättigten Jochen von Drehstrommaschinen. Archiv für Electrotechnik, 1957, Vol. 43, pp. 77-94.
69. Xiaogang C., Shixiang N., Jin H., 1995. Study of saturated squirrel cage induction machine by means of MEC method. Proceedings of CICEM, Hangzhou, China, 31 August - 2 September 1995, pp.912-915.