A survey of testing and monitoring methods for stator insulation systems in induction machines

Proceedings of 2008 International Conference on Condition Monitoring and Diagnosis, CMD 2008

Volumn , Issue , 2008, Pages 196-203

  Grubic, S ^a   Aller, J M ^b   Lu, B ^c   Habetler, T G ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b UNIVERSIDAD SIMÓN BOLÍVAR   (Venezuela)

^c EATON CORPORATION   (United States)

Author keywords

Condition based maintenance; Hydro generator; Partial discharge analysis; Phase resolved partial discharge measurement

Indexed keywords

DISCHARGE (FLUID MECHANICS); ELECTRIC DRIVES; INDUCTION MOTORS; INSULATION; PARTIAL DISCHARGES; STATORS;

CATASTROPHIC FAILURES; CONDITION BASED MAINTENANCE; ELECTRICAL INSULATION SYSTEMS; HYDRO GENERATOR; PARTIAL DISCHARGE ANALYSIS; PHASE RESOLVED PARTIAL DISCHARGE MEASUREMENT; STATOR INSULATION SYSTEMS; TURN-TO-TURN INSULATIONS;

CONDITION MONITORING;

EID: 51849103888     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/CMD.2008.4580262     Document Type: Conference Paper

References (55)

1. "Report of large motor reliability survey of industrial and commercial installations, part I+II," Industry Applications, IEEE Transactions on, Volume IA-21, Issue 4, pp.853-872, July 1985
2. H. W. Penrose, "Test methods for determining the impact of motor condition on motor efficiency and reliability," ALL-TEST Pro, LLC, O d Saybrook, CT.
3. G. C. Stone, E. A. Boulter, I. Culbert, and H. Dhirani, "Electrical insulation for rotating machines," Design, Evaluation, Aging, Testing, and Repair, IEEE Press , John Wiley & Sons, 2004
4. A. Siddique, G.S. Yadava, and B.Singh, "A review of stator fault monitoring techniques of induction motors," IEEE Transaction on Energy Conversion, Vol. 20, No. 1, pp.106-114, March 2005
5. D.E. Schump, "Testing to assure reliable operation of electric motors," Petroleum and Chemical Industry Conference, 1990. Record of Conference Papers., Industry Applications Society 37th Annual, pp.179-184, 10-12 Sept. 1990
6. J. Geiman, "DC step-voltage and surge testing of motors," Baker Instrument Company
7. A.H. Bonnett, and G.C. Soukup, "Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors", Industry Applications, IEEE Transactions on, Volume 28, Issue 4, pp.921-937, July- Aug. 1992
8. "Users manual - digital Surge/DC HiPot/Resistance tester Models D3R/D6R/D12R," Baker Instrument Company, 2005
9. G.C. Stone, "Recent important changes in IEEE motor and generator winding insulation diagnostic testing standards," Industry Applications, IEEE Transactions on, Volume 41, Issue 1, pp.91-100, Jan.-Feb. 2005
10. C. Lanham, "Understanding the tests that are recommended for electric motor predictive maintenance," Baker Instrument Company
11. E. Wiedenbrug, G. Frey, and J. Wilson, "Impulse testing and turn insulation deterioration in electric motors," IEEE Pulp and Paper Industry Technical Conference, Conference Record of the 2003 Annual, pp.50-55,16-20 June 2003
12. E. Wiedenbrug, G. Frey, and J. Wilson, "Impulse testing as a predictive maintenance tool," Diagnostics for Electric Machines, Power Electronics and Drives, 4th IEEE International Symposium on, pp.13-19, 24-26 Aug. 2003
13. B.K. Gupta, B.A. Lloyd, and D.K. Sharma, "Degradation of turn insulation in motor coils under repetitive surges," Energy Conversion, IEEE Transactions on, Volume 5, Issue 2, pp.320-326, June 1990
14. B. Gupta, "Risk in surge testing of turn insulation in windings of rotating machines," Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, Proceedings, pp.459-462, 23-25 Sept. 2003
15. J.H. Dymond, M.K.W. Stranges, and N. Stranges, "The Effect of Surge Testing on the Voltage Endurance Life of Stator Coils," Industry Applications, IEEE Transactions on, Volume 41, Issue 1, pp.120-126, Jan.- Feb. 2005
16. M. Melfi, A.M.J. Sung, S. Bell, and G.L. Skibinski, "Effect of surge voltage risetime on the insulation of low-voltage machines fed by PWM converters," Industry Applications, IEEE Transactions on, Volume 34, Issue 4, pp.766-775, July-Aug. 1998
17. H.D. Kim and Y.H. Ju, "Comparison of off-line and on-line partial discharge for large motors,", Electrical Insulation, 2002. Conference Record of the 2002 IEEE International Symposium on, pp.27-30, 7-10 April 2002
18. X. Ma, X. Ma, B. Yue,W. Lu, and H. Xie, "Study of aging characteristics of generator stator insulation based on temperature spectrum of dielectric dissipation factor," Properties and Applications of Dielectric Materials, 2003. Proceedings of the 7th International Conference on, Volume 1, pp.294-297, 1-5 June 2003
19. S. Williamson and K. Mirzoian, "Analysis of cage induction motors with stator winding faults," IEEE Transactions on Power Apparatus and Systems, Volume PAS-104, Issue 7, pp.1838-1842, July 1985
20. R.M. Tallam, T.G. Habetler, and R.G. Harley, "Transient model for8 induction machines with stator winding turn faults," Industry Applications, IEEE Transactions on, Volume 38, Issue 3, pp.632-637, May-June 2002
21. B. Lu, T. G. Habetler, and R. G. Harley, A survey of efficiencyestimation methods of in-service induction motors, IEEE Transactions on Industry Applications, vol. 42, no. 4, pp. 924-933, July/Aug. 2006.
22. S.-B. Lee, T.G. Habetler, R.G. Harley, and D.J. Gritter, "An evaluation of model-based stator resistance estimation for induction motor stator winding temperature monitoring," Industry Applications, IEEE Transactions on, Volume 34, Issue 4, pp.766-775, July-Aug. 1998
23. S.-B. Lee and T.G. Habetler, "An online stator winding resistance estimation technique for temperature monitoring of line-connected induction machines," Industry Applications, IEEE Transactions on, Volume 39, Issue 3, pp.685-694, May-June 2003
24. Z. Gao, T.G. Habetler, R.G. Harley, and R.S. Colby, "A sensorless adaptive stator winding temperature estimator for mains-fed induction machines with continuous-operation periodic duty cycles," Industry Applications Conference, 2006. 41st IAS Annual Meeting. Conference Record of the 2006 IEEE, Volume 1, pp.448-455, Oct. 2006
25. R. Beguenane and M.E.H. Benbouzid, "Induction motors thermal monitoring by means of rotor resistance identification," Energy Conversion, IEEE Transactions on, Volume 14, Issue 3, pp.566-570, Sept. 1999
26. G.C. Stone, "Advancements during the past quarter century in on-line monitoring of motor and generator winding insulation," Dielectrics and Electrical Insulation, IEEE Transactions on [see also Electrical Insulation, IEEE Transactions on] Volume 9, Issue 5, pp.746-751, Oct. 2002
27. S.-B. Lee, K. Younsi, and G.B. Kliman, "An online technique for monitoring the insulation condition of AC machine stator windings," Energy Conversion, IEEE Transactions on, Volume 20, Issue 4, pp.737-745, Dec. 2005
28. S.-B. Lee, J. Yang, K. Younsi, and R.M. Bharadwaj, "An online groundwall and phase-to-phase insulation quality assessment technique for AC-machine stator windings," Industry Applications, IEEE Transactions on, Volume 42, Issue 4, pp.946-957, July-Aug. 2006
29. P. Werynski, D. Roger, R. Corton, and J.F. Brudny, "Proposition of a new method for in-service monitoring of the aging of stator winding insulation in AC motors," Energy Conversion, IEEE Transactions on, Volume 21, Issue 3, pp.673-681, Sept. 2006
30. M.W. Kending and D.N. Rogovin, "Method of conduction broadband impedance response test to predict stator winding failure," United States Patent, US 6323658 B1, Nov. 27, 2001
31. C.J. Dister, P.A. DelVecchio, and D.N. Rogovin, "System to provide low cost excitation to stator winding to generate impedance spectrum for use in stator diagnostics," United States Patent, 6035265, Mar. 7, 2000
32. I. Albizu, I. Zamora, A. J. Mazon, and A. Tapia, "Electric Power Components and Systems," Techniques for Online Diagnosis of Stator Shorted Turns in Induction Motors, Taylor & Francis, pp.97-114, Oct. 2005
33. I. Albizu, I. Zamora, A. J. Mazon, J.R. Saenz, and A. Tapia, "On-line stator fault diagnosis in low voltage induction motors," Universities Power Engineering Conference, 2004. UPEC 2004. 39th International Volume 1,pp.504-508, 6-8 Sept. 2004
34. G.B. Kliman, W.J. Premerlani, R.A. Koegl, and D. Hoeweler, "A new approach to on-line turn fault detection in AC motors," Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96., Conference Record of the 1996 IEEE Volume 1, pp.687-693, 6-10 Oct. 1996
35. M. Arkan, D.K. Perovic, and P. Unsworth, "Online stator fault diagnosis in induction motors," Electric Power Applications, IEE Proceedings- Volume 148, Issue 6, pp.537-547, Nov. 2001
36. R.M. Tallam, T.G. Habetler, R.G. Harley, D.J. Gritter, and B.H. Burton, "Neural network based on-line stator winding turn fault detection for induction motors," Industry Applications Conference, 2000. Conference Record of the 2000 IEEE Volume 1, pp.375-380, 8-12 Oct. 2000
37. R.M. Tallam, T.G. Habetler, and R.G. Harley, "Self-commissioning training algorithms for neural networks with applications to electric machine fault diagnostics," Power Electronics, IEEE Transactions on, Volume 17, Issue 6, pp.1089-1095, Nov. 2002
38. R.M. Tallam, T.G. Habetler, and R.G. Harley, "Experimental testing of a neural-network-based turn-fault detection scheme for induction machines under accelerated insulation failure conditions," Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003. 4th IEEE International Symposium on, pp.58-62, 24-26 Aug. 2003
39. J.L. Kohler, J. Sottile, and F.C. Trutt, "Condition monitoring of stator windings in induction motors. I. Experimental investigation of the effective negative-sequence impedance detector," Industry Applications, IEEE Transactions on, Volume 38, Issue 5, pp.1447-1453, Sept.-Oct. 2002
40. J.L. Kohler, J. Sottile, and F.C. Trutt, "Condition monitoring of stator windings in induction motors. II. Experimental investigation of voltage mismatch detectors," Industry Applications, IEEE Transactions on, Volume 38, Issue 5, pp.1454-1459, Sept.-Oct. 2002
41. J.L. Kohler, J. Sottile, and F.C. Trutt, "Online condition monitoring of induction motors," Industry Applications, IEEE Transactions on, Volume 38, Issue 6, pp.1627-1632, Nov.-Dec. 2002
42. J.L. Kohler, J. Sottile, and F.C. Trutt, "Alternatives for assessing the electrical integrity of induction motors," Industry Applications, IEEE Transactions on, Volume 28, Issue 5, pp.1109-1117, Sept.-Oct. 1992
43. J.L. Kohler, J. Sottile, and F.C. Trutt, "Application of online voltage mismatch condition monitoring of induction motor stator windings in a mining environment," Industry Applications Conference, 2003. 38th IAS Annual Meeting. Conference Record of the, Volume 3, pp.1637-1644, 12- 16 Oct. 2003
44. S.-B. Lee, R.M. Tallam, and T.G. Habetler, "A robust, on-line turnfault detection technique for induction machines based on monitoring the sequence component impedance matrix," Power Electronics, IEEE Transactions on, Volume 18, Issue 3, pp.865-872, May 2003
45. M.A. Cash, T.G. Habetler, and G.B. Kliman, "Insulation failure prediction in AC machines using line-neutral voltages," Industry Applications, IEEE Transactions on, Volume 34, Issue 6, pp.1234-1239, Nov.-Dec. 1998
46. J. Penman, H.G. Sedding, B.A. Lloyd, and W.T. Fink, "Detection and location of interturn short circuits in the stator windings of operating motors," Energy Conversion, IEEE Transactions on, Volume 9, Issue 4, pp.652-658, Dec. 1994
47. T. Assaf, H. Henao, and G.-A. Capolino, "Simplified axial flux spectrum method to detect incipient stator inter-turn short-circuits in induction machine," Industrial Electronics, 2004 IEEE International Symposium on, Volume 2, pp.815-819, 4-7 May 2004
48. G. Joksimovic and J. Penman, "The detection of interturn short circuits in the stator windings of operating motors," Industrial Electronics Society, 1998. IECON '98. Proceedings of the 24th Annual Conference of the IEEE, Volume 4, pp.1974-1979, 31 Aug.-4 Sept. 1998
49. G. Gentile, S. Meo, and A. Ometto, "Induction motor current signature analysis to diagnostics, of stator short circuits," Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED 2003. 4th IEEE International Symposium on, pp.47-51, 24-26 Aug. 2003
50. S. Nandi and H.A. Toliyat, "Novel frequency-domain-based technique to detect stator interturn faults in induction machines using stator-induced voltages after switch-off," Industry Applications, IEEE Transactions on, Volume 38, Issue 1, pp.101-109, Jan.-Feb. 2002
51. A. Stavrou, H.G. Sedding and J. Penman, "Current monitoring for detecting inter-turn short circuits in induction motors," Energy Conversion, IEEE Transactions on, Volume 16, Issue 1, pp.32-37, March 2001
52. N. Arthur and J. Penman, "Induction machine condition monitoring with higher order spectra," Industrial Electronics, IEEE Transactions on, Volume 47, Issue 5, pp.1031-1041, Oct. 2000
53. F.C. Trutt, J. Sottile, and J.L. Kohler, "Condition monitoring of induction motor stator windings using electrically excited vibrations," Industry Applications Conference, 2002. 37th IAS Annual Meeting. Conference Record of the, Volume 4, pp.2301-2305, 13-18 Oct. 2002
54. G. Stone and J. Kapler, "Stator winding monitoring," Industry Applications Magazine, IEEE, Volume 4, Issue 5, pp.15-20, Sept.-Oct. 1998
55. R.M. Tallam, S.-B. Lee, G. Stone, G.B. Kliman, J. Yoo, T.G. Habetler, and R.G. Harley, "A survey of methods for detection of stator related faults in induction machines," Diagnostics for Electric Machines, Power Electronics and Drives, 4th IEEE International Symposium on, pp.35-46, 2003 24-26 August 2003