An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals

International Journal of Plasticity

Volumn 24, Issue 12, 2008, Pages 2298-2334

  Kim, Ji Hoon ^a   Lee, Myoung Gyu ^b   Barlat, Frédéric ^c   Wagoner, R H ^a   Chung, Kwansoo ^d  

^a Ohio State University   (United States)

^b Korea Institute of Material Science   (South Korea)

^c Pohang University of Science and Technology (POSTECH)   (South Korea)

^d Seoul National University   (South Korea)

Author keywords

Anisotropy; Elasto plasticity; Isotropic kinematic hardening; Strain rate potential Srp2004 18p; Stress integration algorithm

Indexed keywords

ABS RESINS; ALUMINA; ANISOTROPY; BENDING (DEFORMATION); BENDING TESTS; BOOLEAN FUNCTIONS; CONFORMAL MAPPING; CONSTITUTIVE MODELS; CONVERGENCE OF NUMERICAL METHODS; DRAWING (FORMING); ELASTOPLASTICITY; FINITE ELEMENT METHOD; FORMING; METAL FORMING; METALLIC COMPOUNDS; NEWTON-RAPHSON METHOD; PLASTIC DEFORMATION; PLASTICS; SHEET METAL;

ISOTROPIC-KINEMATIC HARDENING; PLASTIC STRAIN RATE; STRAIN RATE POTENTIAL SRP2004-18P; STRESS INTEGRATION ALGORITHM;

STRAIN RATE;

EID: 51349098768     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.06.013     Document Type: Article

References (88)

1. ABAQUS, 2006. User's Manual for Version 6.5.1. Hibbit, Karlson & Sorensen Inc.
2. Amirkhizi A.V., and Nemat-Nasser S. A framework for numerical integration of crystal elasto-plastic constitutive equations compatible with explicit finite element codes. Int. J. Plasticity 23 (2007) 1918-1937
3. Arminjon M., and Bacroix B. On plastic potentials for anisotropic metals and their derivation from the texture function. Acta Mech. 88 (1991) 219-243
4. Arminjon M., Bacroix B., Imbault D., and Raphanel J.L. A fourth-order plastic potential for anisotropic metals and its analytical calculation from the texture function. Acta Mech. 107 (1994) 33-51
5. Bacroix B., and Gilormini P. Finite element simulations of earing in polycrystalline materials using a texture-adjusted strain-rate potential. Model. Simul. Mater. Sci. Eng. 3 (1995) 1-21
6. Banabic D., Aretz H., Comsa D.S., and Paraianu L. An improved analytical description of orthotropy in metallic sheets. Int. J. Plasticity 21 (2005) 493-512
7. Barlat F., Lege D.J., and Brem J.C. A six-component yield function for anisotropic materials. Int. J. Plasticity 7 (1991) 693-712
8. Barlat F., and Chung K. Anisotropic potentials for plastically deforming metals. Model. Simul. Mater. Sci. Eng. 1 (1993) 403-416
9. Barlat F., Maeda Y., Chung K., Yanagawa M., Brem J.C., Hayashida Y., Lege D.J., Matsui K., Murtha S.J., Hattori S., Becker R.C., and Makosey S. Yield function development for aluminum alloy sheets. J. Mech. Phys. Solids 45 (1997) 1727-1763
10. Barlat F., Brem J.C., Yoon J.W., Chung K., Dick R.E., Lege D.J., Pourboghrat F., Choi S.-H., and Chu E. Plane stress yield function for aluminum alloy sheets-part 1: theory. Int. J. Plasticity 19 (2003) 1297-1319
11. Barlat F., Aretz H., Yoon J.W., Karabin M.E., Brem J.C., and Dick R.E. Linear transformation-based anisotropic yield functions. Int. J. Plasticity 21 (2005) 1009-1039
12. Bassani J.L. Yield characterization of metals with transversely isotropic plastic properties. Int. J. Mech. Sci. 19 (1977) 151
13. Beaudoin A.J., Mathur K.K., Dawson P.R., and Johnson G.C. Three-dimensional deformation process simulation with explicit use of polycrystalline plasticity models. Int. J. Plasticity 9 (1993) 833-866
14. Beausir B., Tóth L.S., and Neale K.W. Role of strain-rate sensitivity in the crystal plasticity of hexagonal structures. Int. J. Plasticity 23 (2007) 227-243
15. Becker R., Smelser R.E., and Panchanadeeswaran S. Simulations of earing in aluminum single crystals and polycrystals. Model. Simul. Mater. Sci. Eng. 1 (1993) 203-224
16. Budianski B. Anisotropic plasticity of plane-isotropic sheets. In: Dvorak D.J., and Shield R.T. (Eds). Mechanics of Material Behavior (1984), Elsevier, Amsterdam, The Netherlands 15
17. Cazacu O., and Barlat F. Generalization of Drucker's yield criterion to orthotropy. Math. Mech. Solids 6 (2001) 613-630
18. Chaboche J.L. Time independent constitutive theories for cyclic plasticity. Int. J. Plasticity 2 (1986) 149-188
19. Chung, K., 1984. The analysis of anisotropic hardening in finite-deformation plasticity. Ph.D. Thesis, Stanford University, USA.
20. Chung K., and Richmond O. Ideal forming, part I: homogeneous deformation with minimum plastic work. Int. J. Mech. Sci. 34 (1992) 575-591
21. Chung K., and Richmond O. Ideal forming, part II: sheet forming with optimum deformation. Int. J. Mech. Sci. 34 (1992) 617-633
22. Chung K., and Richmond O. A deformation theory of plasticity based on minimum work paths. Int. J. Plasticity 9 (1993) 907-920
23. Chung K., Lee S.Y., Barlat F., Keum Y.T., and Park J.M. Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential. Int. J. Plasticity 12 (1996) 93-115
24. Chung K., Barlat F., Richmond O., and Yoon J.W. Blank design for a sheet forming application using the anisotropic strain-rate potential Srp98. In: Zabaras, et al. (Ed). The Integration of Material, Process and Product Design (1999), Balkema, Rotterdam 213-219
25. Chung K., Lee M.-G., Kim D., Kim C., Wenner M.L., and Barlat F. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, Part I: theory and formulation. Int. J. Plasticity 21 (2005) 861-882
26. Clausen J., Damkilde L., and Andersen L. Efficient return algorithms for associated plasticity with multiple yield planes. Int. J. Numer. Meth. Eng. 66 (2006) 1036-1059
27. De Borst R., and Feenstra P.H. Studies in anisotropic plasticity with reference to the Hill criterion. Int. J. Numer. Meth. Eng. 54 (1990) 315-336
28. Ding K.Z., Qin Q.-H., and Cardew-Hall M. Substepping algorithms with stress correction for the simulation of sheet metal forming process, Int. J. Mech. Sci. 49 (2007) 1289-1308
29. Drucker, D.C., 1951. A more fundamental approach to plastic stress-strain relations. Proc. First US Nat. Congr. Appl. Mech., p. 487.
30. Gerbault M., Poliakov A.B., and Daignieres M. Prediction of faulting from the theories of elasticity and plasticity: what are the limits?. J. Struct. Geol. 20 (1998) 301-320
31. Gotoh M. A theory of plastic anisotropic based on a yield function of fourth order(plane stress state). Int. J. Mech. Sci. 19 (1977) 505
32. Graf A., and Hosford W.F. Effect of changing strain paths on forming limit diagrams of Al-2008-T4. Metall. Trans. A 24 (1993) 2503
33. Graf A., and Hosford W.F. The influence of strain path changes on forming limit diagrams of Al-611-T4. Int. J. Mech. Sci. 36 (1994) 897-910
34. Haddadi H., Bouvier S., Banu M., Maier C., and Teodosiu C. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification. Int. J. Plasticity 22 (2006) 2226-2271
35. Hallberg H., Håkansson H., and Ristinmaa M. A constitutive model for the formation of martensite in austenitic steels under large strain plasticity. Int. J. Plasticity 23 (2007) 1213-1239
36. Han C.S., Chung K., Wagoner R.H., and Oh S.I. A multiplicative finite elasto-plastic formulation with anisotropic yield functions. Int. J. Plasticity 19 (2003) 197-211
37. Har J. A unified stress update algorithm for explicit transient shell dynamics with combined isotropic-kinematic hardening in Eulerian rate-type phenomenological finite elasto-plasticity models. Comput. Methods Appl. Mech. Eng. 196 (2007) 3248-3275
38. Hartmann S., and Haupt P. Stress computation and consistent tangent operator using non-linear kinematic hardening models. Int. J. Numer. Meth. Eng. 36 (1993) 3801-3814
39. Hershey A.V. The plasticity of an isotropic aggregate of anisotropic face centered cubic crystals. J. Appl. Mech. 30 (1954) 241
40. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc. R. Soc. Lond. 193A (1948) 281
41. Hill R. Theoretical plasticity of textured aggregates. Math. Proc. Camb. Phill. Soc. 85 (1979) 179
42. Hoferlin, E., Van Bael, A., Van Houtte, P., 1999. Comparison between stress-based and strain-based elasto-plastic finite element models for anisotropic metals, 1999. In: Khan, A.S. (Ed.), Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation. Proc. Plasticity'99. Neat Press Fulton, MD, pp. 145-148.
43. Hosford W.F. A generalized isotropic yield criterion. J. Appl. Mech. 39 (1972) 607
44. Hu J., Jonas J.J., and Ishikawa T. FEM simulation of the forming of textured aluminum sheets. Mater. Sci. Eng. A256 (1998) 51-59
45. Hu W. An orthotropic yield criterion in a 3-D general stress state. Int. J. Plasticity 21 9 (2005) 1771-1796
46. Hughes, T.J.R., 1984. Numerical implementation of constitutive models, rate independent deviatoric plasticity. In: Nemat-Nasser, S. et al. (Eds.), Theoretical Foundations for Large-Scale Computations for Nonlinear Material Behavior, Martinus Nijhoff Publisher, Dordrect, The Netherlands, 1984, pp. 29-57.
47. Kalidindi S.R., Bronkhorst C.A., and Anand L. Crystallographic texture evolution in bulk deformation processing of metals. J. Mech. Phys. Solids 40 (1992) 537-569
48. Karafillis A.P., and Boyce M.C. A general anisotropic yield criterion using bounds and a transformation weighting tensor. J. Mech. Phys. Solids 41 (1993) 1859-1886
49. Keum Y.T., and Lee K.B. Sectional finite element analysis of forming processes for aluminum-alloy sheet metals. Int. J. Mech. Sci. 42 (2000) 1911-1933
50. Kim, D., Chung, K., Barlat, F., Youn, J.R., Kang, T.J., 2003. Non-quadratic plane-stress anisotropic strain-rate potential. In: Proceedings of the Sixth International Symposium on Microstructures and Mechanical Properties of New Engineering Materials (IMMM 2003), Wuhan, China, October 26 to November 1, 2003, pp. 46-51.
51. Kim D., Barlat F., Bouvier S., Rabahallah M., Balan T., and Chung K. Non-quadratic anisotropic potential based on linear transformation of plastic strain rate. Int. J. Plasticity 23 (2007) 1380-1399
52. Krieg R.D., and Krieg D.B. Accuracies of numerical solution methods for the elastic-perfectly plastic model. J. Pressure Vessel Technol., ASME 99 (1977) 510-515
53. Lee E.H. Elastic plastic deformation at finite strain. ASME J. Appl. Mech. 36 (1969) 1-6
54. Lee M.-G., Kim D., Kim C., Wenner M.L., Wagoner R.H., and Chung K. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions part II: characterization of material properties. Int. J. Plasticity 21 (2005) 883-914
55. Lee M.-G., Kim D., Kim C., Wenner M.L., and Chung K. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions part III: applications. Int. J. Plasticity 21 (2005) 915-953
56. Lee S.Y., Keum Y.T., Chung K., Park J.M., and Barlat F. 3-D FEM simulations of stamping processes for planar anisotropic sheet metals. Int. J. Mech. Sci. 39 (1997) 1181-1198
57. Li S., Hoferlin E., and Van Bael A. Application of a texture-based plastic potential in earing prediction of an IF steel. Adv. Eng. Mater. 3 (2001) 990-994
58. Li S., Hoferlin E., Van Bael A., Van Houtte P., and Teodosiu C. Finite element modeling of plastic anisotropy induced by texture and strain-path change. Int. J. Plasticity 19 (2003) 647-674
59. Logan R.W., and Hosford W.F. Upper-bound anisotropic yield locus calculations assuming 〈1 1 1〉-pencil glide. Int. J. Mech. Sci. 22 (1980) 419
60. Lubarda V.A., and Shih C.F. Plastic spin and related issues in phenomenological plasticity. J. Appl. Mech. 61 (1994) 524-529
61. Martin J.B., and Nappi A. An internal variable formulation for perfectly plastic and linear hardening relations in plasticity. Eur. J. Mech. A/Solids 9 (1990) 107-131
62. Martin J.B., and Caddemi S. Sufficient conditions for convergence of the Newton-Raphson iterative algorithm in incremental elastic-plastic analysis. Eur. J. Mech. A/Solids 13 (1994) 351-365
63. Mathur K.K., and Dawson P.R. On modelling the development of crystallographic texture bulk forming processes. Int. J. Plasticity 5 (1989) 67-94
64. Matzenmiler A., and Taylor R.L. A return mapping algorithm for isotropic elastoplasticity. Int. J. Numer. Meth. Eng. 37 (1994) 813-826
65. Miehe C., and Schotte J. Anisotropic finite elastoplastic analysis of shells: simulation of earing in deep-drawing of single- and polycrystalline sheets by Taylor-type micro-to-macro transitions. Comput. Methods Appl. Mech. Eng. 193 (2004) 25-57
66. Numisheet, 2002. Benchmark Problem, 2002. In: Yang, D.Y., Oh, S.I., Huh, H., Kim, Y.H. (Eds.), Proceedings of Fifth International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Jeju, Korea, 2002.
67. Ortiz M., and Popov E.P. Accuracy and stability of integration algorithms for elastoplastic constitutive relations. Int. J. Numer. Meth. Eng. 21 (1985) 1561-1576
68. Ortiz M., and Simo J.C. An analysis of a new class of integration algorithms for elastoplastic constitutive relations. Int. J. Numer. Meth. Eng. 23 (1986) 353-366
69. Qiu, Y., Neale, K.W., Makinde, A., MacEwen, S.R., 1995. Numerical modelling of metal formability using polycrystal plasticity. In: Shen, S.-H., Dawson, P. (Eds.), Simulation of Materials Processing: Theory, Methods and Applications (Proc. NUMIFORM'95), Balkema, Rotterdam, The Netherlands, 1995, pp. 327-331.
70. Raabe D., Wang Y., and Roters F. Crystal plasticity simulation study on the influence of texture on earing in steel. Comput. Mater. Sci. 34 (2005) 221-234
71. Rosati L., and Valoros N. A return map algorithm for general isotropic elasto/visco-plastic materials in principal space, Int. J. Numer. Meth. Eng. 60 (2004) 461-498
72. Rouainia M., and Wood D.M. Computational aspects in finite strain plasticity analysis of geotechnical materials. Mech. Res. Commun. 33 (2006) 123-133
73. Seifert T., Schenk T., and Schmidt I. Efficient and modular algorithms in modeling finite inelastic deformations: objective integration, parameter identification and sub-stepping techniques. Comput. Methods Appl. Mech. Eng. 196 (2007) 2269-2283
74. Simo J.C., and Taylor R.L. Consistent tangent operators for rate independent elastoplasticity. Comput. Methods Appl. Mech. Eng. 48 (1985) 101-118
75. Simo J.C., and Taylor R.L. A return mapping algorithm for plane stress elastoplasticity. Int. J. Numer. Meth. Eng. 22 (1986) 649-670
76. Simo J.C., and Hughes T.J.R. Computational Inelasticity (1997), Springer-Verlag, NY, USA
77. Teodosiu, C., Hu, Z., 1998. Microstructure in the continuum modelling of plastic anisotropy. In: Roskilde, Danemark (Eds.), Proceedings of the 19th Risø International Symposium on Modelling of Structures and Mechanics of Materials from Microscale to Product, pp. 149-168.
78. Tong W. A plane stress anisotropic plastic flow theory for orthotropic sheet metals. Int. J. Plasticity 22 (2006) 497-535
79. Van Houtte P., Mols K., Van Bael A., and Aernoudt E. Application of yield loci calculated from texture data. Textures Microstruct. 11 (1989) 23-39
80. Van Houtte, P., Van Bael, A., Aernoudt, E., Pillinger, I., Hartley, P., Sturgess, C.E.N., 1989b. In: Proceedings of the Second International Symposium on Plasticity and its Current Applications, Tsu, Japan, 1989, p. 111.
81. Van Houtte P. Fast calculation of average Taylor factors and Mandel spins for all possible strain modes. Int. J. Plasticity 17 (2002) 807-818
82. Van Houtte P., and Van Bael A. Convex plastic potentials of fourth and sixth rank for anisotropic materials. Int. J. Plasticity 20 8-9 (2004) 1505-1524
83. Voyiadjis G.Z., Abu Al-Rub R.K., and Palazotto A.N. Computational and algorithmic aspects of small and finite deformation thermoviscoplasticity for strain localization. Eur. J. Comput. Mech. 15 (2006) 945-987
84. Wu H.C. Anisotropic plasticity for sheet metals using the concept of combined isotropic-kinematic hardening. Int. J. Plasticity 18 (2002) 1661-1682
85. Yoon J.W., Song I.S., Yang D.Y., Chung K., and Barlat F. Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system. Int. J. Mech. Sci. 37 (1995) 733-752
86. Yoon J.W., Barlat F., Dick R.E., and Karabin M.E. Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. Int. J. Plasticity 22 (2006) 174-193
87. Zhou Y., Jonas J.J., Szabo L., Makinde A., Jain M., and MacEwen S. Incorporation of an anisotropic (texture-based) strain-rate potential into three-dimensional finite element simulations, Int. Int. J. Plasticity 13 (1997) 165-181
88. Ziegler H. An Introduction to Thermodynamics (1977), North Holland Publishing Company, Amsterdam, The Netherland