Strength of CAD/CAM-generated esthetic ceramic molar implant crowns

International Journal of Oral and Maxillofacial Implants

Volumn 23, Issue 4, 2008, Pages 609-617

  Wolf, Daniel ^a   Bindl, Andreas ^a   Schmidlin, Patrick R ^a   Lüthy, Heinz ^a   Mörmann, Werner H ^a,b  

^a UNIVERSITY OF ZURICH   (Switzerland)

^b NONE   (Switzerland)

Author keywords

Adhesive cementation; CAD CAM esthetic ceramic; CAD CAM implant crowns; Fracture load; Titanium abutments; Zirconia abutments

Indexed keywords

DENTAL ALLOY; TITANIUM; ZIRCONIUM; ZIRCONIUM OXIDE;

ANALYSIS OF VARIANCE; ARTICLE; CEMENTATION; COMPUTER AIDED DESIGN; DENTAL CARE; DENTURE; EVALUATION; METHODOLOGY; MOLAR TOOTH; NONPARAMETRIC TEST; SURVIVAL; TOOTH CROWN; TOOTH PROSTHESIS;

ANALYSIS OF VARIANCE; CEMENTATION; COMPUTER-AIDED DESIGN; CROWNS; DENTAL ABUTMENTS; DENTAL ALLOYS; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL STRESS ANALYSIS; ESTHETICS, DENTAL; MOLAR; STATISTICS, NONPARAMETRIC; SURVIVAL ANALYSIS; TITANIUM; ZIRCONIUM;

EID: 50849099146     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (46)

1. Hansen S. Cerec-chairside fabrication of superstructures for immediately loaded implants. In: Mörmann WH (ed). State of the Art of CAD/CAM Restorations. 20 Years of Cerec. Berlin-Quintessence, 2006:173-180.
2. Avivi-Aber L, Zarb GA. Clinical effectiveness of implant-supported single-tooth replacement: The Toronto Study, Int J Oral Maxillofac Implants 1996;11:311-321.
3. Scheller H, Kultje C, Klineberg I, et al. A 5-year multicenter study on implant-supported single crown restorations. Int J Oral Maxillofac Implants 1998;13:212-218.
4. Prestipino V, Ingber A. Esthetic high-strength implant abutments. Part I. J Esthet Dent 1993;4:29-35.
5. Prestipino V, Ingber A. Esthetic high-strength implant abutments. Part II. J Esthet Dent 1993;5:63-68.
6. Wohlwend A, Studer S, Schärer P. The zirconium oxide abutment: An all-ceramic abutment for esthetic improvement of implant suprastructures. QDT 1997;1:63-72.
7. Yilderim M, Fischer H, Marx R, Edelhoff D. In-vivo fracture resistance of implant-supported all-ceramic restorations. J Prosthet Dent 2003(b);90:325-331.
8. Tinschert J, Zwez D, Marx R. Anusavice KJ. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 2000;28:529-535.
9. Filser F, Kocher P, Weibel F, Lüthy H, Schärer P, Gauckler LJ. Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM). Int J Comp Dent 2001;4:89-106.
10. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 2004;20:449-456.
11. Kelly JR. Machinable ceramics. In: Mörmann WH (ed). State of the Art of CAD/CAM restorations. 20 years of Cerec. Berlin: Quintessence, 2006:29-38.
12. Bindl A, Lüthy H, Mörmann WH. Fracture load of CAD/CAM-generated slot-inlay FPDs. Int J Prosthodont 2003;16:653-660.
13. Andersson B, Ödman P, Lindvall A-M, Brånemark P-I. Cemented single crowns on osseointegrated implants after 5 Years: Results from a prospective study on CeraOne. Int J Prosthodont 1998; 11:212-218.
14. Prestipino V, Ingber A, Kravitz J. Clinical and laboratory consideration in the use of a new all-ceramic restorative system. Pract Periodontics Aesthet Dent 1998;10:567-575.
15. Helkimo E, Carlson GE, Helkimo M. Bite force and state of definition. Acta Odontol Scand 1977;35:297-303.
16. Waltimo A, Könönen M, A novel bite force recorder and maximal isometric bite force values for healthy young adults. Scand J Dent Res 1993;101:171-175.
17. Waltimo A, Kemppainen P, Könönen M. Maximal contraction force and endurance of human jaw-closing muscles in isometric clenching. Scandl Dent Res 1993;101:416-421.
18. Esquivel-Upshaw JF, Anusavice KJ, Young H, Jones J, Gibbs C. Clinical performance of a lithia disilicate-based core ceramic for three-unit posterior FPDs. Int J Prosthodont 2004;17:469-475.
19. Peterson IM, Wuttiphan S, Lawn BR,Chyung K. Role of microstructure on contact damage and strength degradation of micaceous glass-ceramics. Dent Mater 1998;14:80-89.
20. Jung YG, Peterson IM, Kim DK, Lawn BR. Lifetime-limiting strength degradation from contact fatigue in dental ceramics. J Dent Res 2000,79:722-731.
21. Bindl A, Lüthy H, Mörmann WH. Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dent Mater 2006;22:29-36.
22. Mörmann WH, Bindl A, Lüthy H, Rathke A. Effects of preparation and luting system on all-ceramic computer-generated crowns, Int J Prosthodont 1998;11:333-339.
23. Kümin P, Lüthy H, Mörmann WH. Strength of ceramic and polymer after CAD/CAM-milling and bonded to dentin in German. Schweiz Monatsschr Zahnmed 1993;103:17-24.
24. Lampe K, Lüthy H, Mörmann WH. Fracture load of all-ceramic computer crowns. In:WH Mörmann (ed). CAD/CIM in Aesthetic Dentistry. Cerec 10-year Anniversary Symposium. Chicago: Quintessence, 1996:463-482.
25. Bindl A, Richter B, Mörmann WH. Survival of ceramic computer-aided desingn/manufacturing crowns bonded to preparations with reduced macroretention geometry, Int J Prosthodont 2005;18:219-224.
26. Bindl A, Mörmann WH.Cerec implant crowns on ceramic abutments. In: Mörmann WH (ed). State of the Art of CAD/CAM Restorations. 20 years of Cerec. Berlin: Quintessence, 2006: 155-162.
27. Zöllner A, Benthaus K. Cerec labside implant restorations: Custom made abutments. In: Mörmann WH (ed). State of the Art of CAD/CAM Restorations. 20 years of Cerec. Berlin: Quintessence, 2006:163-172.
28. Lysell L, Myrberg N. Mesiodistal tooth size in the deciduous and permanent teeth. Eur J Orthodontics 1982;4:113-122.
29. Ender A, Mörmann WH. Cerec 3 D Design: All-ceramic CAD/CAM inlays, partial crowns, full crowns and veneers, construction and fabrication by computer in German. Zurich: Foundation for the Advancement of Computerized Dentistry, 2005.
30. McCabe JF, Carrick TE. A statistical approach to the mechanical testing of dental materials. Dent Mater 1986;2:139-142.
31. Rekow ED, Harsono M, Janal M, Thompson V, Zhang G. Factorial analysis of variables influencing stress in all-ceramic crowns. Dent Mater 2006;22:125-132.
32. Tripodakis AP, Strub JR, Kappert HF Witkowski S. Strength and mode of failure of single implant all-ceramic abutment restorations under static load, Int J Prosthodont 1995;8:265-275.
33. Behr M, Rosentritt M, Lang R, Handel G. Glass fiber-reinforced abutments for dental implants. A pilot study.Clin Oral Implants Res 2001;12:174-178.
34. Wolf BD. Fracture Load of Monolithic CAD/CAM Generated Crowns on Titanium and Zirconia Implant Abutments with Non-adhesive and Adhesive Cementation thesis; in German. Zurich, Switzerland: University of Zurich, 2006.
35. Addison O, Marquis PM, Fleming GJP. Resin elasticity and the strengthening of all-ceramic restorations. J Dent Res 2007;86: 519-523.
36. Burke FJT, Fleming G, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent 2002;2:7-22.
37. Taira Y, Matsumura H, Yoshida K, Tanaka T, Atsuta M. Influence of surface oxidation of titanium on adhesion. J Dent 1998;26:69-73.
38. Taira Y, Yanagida H, Matsumura H, Atsuta M. Effects of a metal etchant and two primers on resin bonding durability to titanium. Eur J Oral Sci 2004;112:95-100.
39. Tsuchimoto Y, Yoshida Y, Takeuchi M, et al. Effect of surface pretreatment on durability of resin-based cements bonded to titanium. Dent Mater 2006;22:545-552.
40. Schneider R, Fernando deGoes M, Pessanha Henriques GE. Chan DCN. Tensile bond strength of dual curing resin-based cements to commercially pure titanium. Dent Mater 2007;23:81-87.
41. Kern M, Wegner S. Bonding to zirconia ceramic: Adhesion methods and their durability. Dent Mater 1998;14:64-71.
42. Wolfart M, Lehmann F, Wolfart S, Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 2007;23:45-50.
43. Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 2004;91:356-362.
44. Lüthy H, Loeffel O, Hämmerle CH. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 2006;22:195-200.
45. Sturzenegger B, Fehér A, Lüthy H, et al. Clinical study of zirconium oxide bridges in the posterior segments with the DCM system. Schweiz Monatsschr Zahnmed 2000;110:131-139.
46. Marx R. Modern ceramic materials for esthetic restorations-Strengthening and fracture toughness in German. Dtsch Zahnärztl Z 1993;48:229-236.