Modeling spurt and stress oscillations in flows of molten polymers

Rheologica Acta

Volumn 36, Issue 2, 1997, Pages 110-127

  Adewale, Kolapo P ^a   Leonov, Arkady I ^a  

^a University of Akron   (United States)

Author keywords

Capillary flows; Critical shear stress; Extrudate distortion; Hardening parameter; Loss of fluidity; Melt fracture; Oscillations; Spurt; Stick slip; Wall slip

Indexed keywords

MODELLING-MATHEMATICAL; OSCILLATION(FLUID); POLYMERS;

EID: 0030857402     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF00366817     Document Type: Article

References (110)

1. Adewale KEP (1996) Modeling of melt flow instabilities of high molecular weight polymers with narrow molecular weight distributions. PhD Dissertation, The University of Akron
2. Adewale KEP, Leonov AI (1993) On modeling spurt flow of polymers. J Non-Newt Fl Mech 49:133-138
3. Bagley EB (1961) The separation of elastic and viscous effect in polymer flow. Trans Soc Rheol 5:355-368
4. Bagley EB, Birks AM (1960) Flow of polyethylene into a capillary. J Appl Phys 31:556-561
5. Bagley EB, Cabot IM, West DC (1958) Discontinuity in flow curve of polyethylene. J Appl Phys 29:109-110
6. Bagley EB, Schreiber HP (1961) Effect of die entry geometry on polymer melt fracture and extrudate distortion. Trans Soc Rheol 5:341-353
7. Bagley EB, Storey SH, West DC (1963) Post extrusion swelling of polyethylene. J Appl Polym Sci 7:1661-1672
8. Bialas GA, White JL (1969) Extrusion of polymer melts and melt flow instabilities. I Experimental study of capillary flow and extrudate distortion. II Site of initiation and mechanisms of melt flow instability. Rubber Chem Technol 42:675-681; 682-690
9. Blyler LL, Hart AC (1970) Capillary flow instability of ethylene polymer melts. Polym Eng Sci 10:93-203
10. Borisenkova EK, Dreval VE, Vinogradov GV, Kurbanaliev MK, Moiseyev VV, Shalganova VG (1982) Transition of polymers from the fluid to the forced high-elastic and leathery states at temperature. Polymer 23:91-99
11. Boudreaux E (Jr), Cuculo JA (1977-78) Polymer flow instability: A review and analysis. J Macro Sci C16(1):39-77
12. Brandrup J, Immergut EH (1989) Polymer Handbook. John Wiley, p V/8
13. Brochard F, de Gennes PG (1992) Shear dependent slippage at a polymer/solid interface. Langmuir 8:3033-3037
14. Brydson JA (1970) Elastic effects in polymer melt flow. In: Flow properties of polymer melts. Chap. 5, pp 79-103. Van Nostrand Reinhold Co, New York
15. Chernyak YuB, Leonov AI (1986) On the theory of the adhesive friction of elastomers. Wear 108:105-138
16. Clegg PL (1957) The flow of molten polymer and their effect on fabrication. Brit Plast 30:535-537
17. de Gennes PG (1979) Ecoulements viscometriques de polymeres enchevetres. CR Acad Sci Paris Ser B 288:219-220
18. Denn MM (1990) Issues in viscoelastic fluid mechanics. Annual Rev Fluid Mech 22:13-34
19. Dennison MT (1967) Flow instability in polymer melts: a review. Plastics Polymers 35:803-808
20. El Kissi N, Leger L, Piau JM, Mezghani A (1994) Effect of surface properties on polymer melt slip and extrusion defects. J Non-Newt Fl Mech 52:249-261
21. El Kissi N, Piau JM (1989) Ecoulement de fluides polymeres enchevetres dans un capillaire modelisation due glissement macroscopique a la paroi. CF Acad Sci Paris Ser II, 309:7-9
22. El Kissi N, Piau JM (1990a) Flow of entangled polydimethylsiloxanes through capillary dies: characterization and modelisation of wall slip phenomena. In: Oliver DR (ed) Third European Rheology Conference. Elsevier Applied Science, London, pp 144-146
23. El Kissi N, Piau JM (1990b) The different capillary flow regimes of entangled polydimethylsiloxane polymers: maroscopic slip at the wall, hysteresis and cork flow. J Non-Newt Fl Mech 37:55-94
24. El Kissi N, Piau JM (1990c) Slip phenomenoa in stress controlled and in flow controlled extrusion. Influence of fluid compressibility. Proc Sixth Ann Mtg PPS, Nice, France
25. El Kissi N, Piau JM (1994) Adherence of LLDPE on the wall for flow regimes with sharkskin. J Rheol 38(5): 1447-1463
26. Fields RT, Wolf CFG (1961) Fabrication of thermoplastic slip resin. USP 2991508 July 11
27. Flory P (1969) Statistical mechanics of chain molecules. Interscience Publ. NY
28. Georgiou GC, Crochet MJ (194a) Compressible viscous flow in slits with slip at the wall. J Rheol 38:639-654
29. Georgiou GC, Crochet MJ (1994b) Time-dependent compressible extrudate-swell problem with slip at the wall. J Rheol 38:1745-1755
30. Han CD (1976) Rheology in polymer processing. Acad Press, New York
31. Han CD, Lamonte RR (1971) A study of polymer melt flow instabilities in extrusion. Polym Eng Sci 11(5):385-394
32. Hatzikiriakos SG, Dealy JM (1991a) Wall slip of molten high density polyethylene. I Sliding plate rheometer studies. J Rheol 35(4):497-523
33. Hatzikiriakos SG, Dealy JM (1991b) The effect of interface conditions on wall slip and melt fracture of high density polyethylene. Proc 49th Techn Conf SPE (ANTEC) Montreal 2311-1314 (May)
34. Hatzikiriakos SG, Dealy JM (1992) Wall slip of molten high density polyethylene. II Capillary rheometer studies. J Rheol 36:703-741
35. Hatzikiriakos SG, Dealy JM (1994) Start-up pressure transients in a capillary rheometer. Polym Eng Sci 493-499
36. Kalika DS, Denn MM (1987) Wall slip and extrudate distortion in linear low-density polyethylene. J Rheol 31(8):815-834
37. Karakin AV, Leonov AI (1968) On self-oscillations in capillary polymer flow. Priklad Mekh Tekhnn Fiz No 3:110-114
38. Kolkka RW, Ierley GR (1989) Phase space analysis of the spurt phenomenon for the Giesekus viscoelastic fluid model. J Non-Newt Fl Mech 33:305-323
39. Kolkka RW, Malkus DS, Hansen MG, Ierley GR, Worthing RA (1988) Spurt phenomena of the Johnson-Segalman fluid and related models. J Non-Newt Fl Mech 29:303-325
40. Kurtz SJ (1984) In: Mena B, Garcia-Rejon A, Rangel-Nafaile C (eds) Advances in Rheology (Proc IX Int Congress Rheology) Vol 3. Univ National Autonoma Mexico, Mexico City, pp 399-407
41. Kurtz SJ (1994) Visualization of exit fracture in the sharkskin process. Program and Abstracts of Polymer Process Soc, 10th Ann Meet Akron, Ohio 8-9
42. Lau HC, Schowalter WR (1986) A model of adhesive failure of viscoelastic fluid during flow. J Rheol 30:193-206
43. Larson RG (1988) Constitutive equations for polymer melts and solutions. Butterworth, Boston
44. Larson RG (1992) Instabilities in viscoelastic flows. Rheol Acta 31:213-263
45. Leonov AI (1976) Nonequilibrium thermodynamics and rheology of viscoelastic polymer media. Rheol Acta 15:85-98
46. Leonov AI (1987) On a class of constitutive equations for viscoelastic liquids. J Non-Newt Fl Mech 25:1-59
47. Leonov AI (1990) On the dependence of friction force on sliding velocity in the theory of adhesive friction of elastomers. Wear 141:137-145
48. Leonov AI (1992) Analysis of simple constitutive equations for viscoelastic liquids. J Non-Newt Fl Mech 42:323-349
49. Leonov AI, Lipkina EKh, Paskhin ED, Prokunin AN (1976) Theoretical and experimental investigations of shearing in elastic polymer liquids. Rheol Acta 15:411-426
50. Leonov AI, Prokunin AN (1980) An improved version of a nonlinear theory of elasto-viscous polymer media. Rheol Acta 19:393-403
51. Leonov AI, Prokunin AN (1983) On non-linear effects in polymeric liquids unde extension. Rheol Acta 22:137-150
52. Leonov AI, Srinivasan A (1991) On modeling of fluidity loss phenomena in Couette and Poiseuille flows of elastic liquids. Rheol Acta 30:14-22
53. Leonov AI, Srinivasan A (1993) Self-oscillations of an elastic plate sliding over a smooth surface. Int J Engng Sci 31(3): 453-473
54. Leonov AI, Prokunin AN (1994) Nonlinear viscoelastic effects in flows of polymer melts and concentrated polymer solutions. Chapman & Hall, NY
55. Lim FJ, Schowalter WK (1989) Wall slip of narrow molecular weight distribution polybutadienes. J Rheol 33:1359-1382
56. Lupton JM (1964) Flow of polymer melts. Chem Eng Progr Sympo Ser 60:17-29
57. Lupton JM, Regester RW (1965) Melt flow of polyethylene at high rates. Polym Eng Sci 5:235-245
58. Lyngaee-Jorgensen J, Marcher B (1985) Spurt fracture in capillary flow. Chem Eng Commun 32:117-151
59. Malkin AY, Leonov AI (1970) Unstable flow of polymers. In: Adv in Pomyer Rheology. Moscow, Khimiya, pp 98-118
60. Malkus SD, Nohel JA, Plohr BJ (1990) Dynamics of shear flow of a non-Newtonian fluid. J Compt Phys 87:464-487
61. Migler KB, Hervet H, Leger L (1993) Slip transition of a polymer melt under shear stress. Phys Rev Lett 70(3):287-290
62. Molenaar J, Koopmans RJ (1994) Modeling polymer melt-flow instabilities. J Rheol 38(1):99-109
63. Mooney M (1931) Explicit formulas for slip and fluidity. J Rheol 2:210-222
64. Mooney M (1958) The rheology of raw elastomers. In: Eirich FR (ed) Rheology: Theory and Applications Academic Press, New York pp 181-233
65. Myerholtz RW (1967) Oscillating flow behavior of high-density polyethylene melts. J Appl Polym Sci 11:687-698
66. Paskhin ED (1978) Motion of polymer liquids under unstable conditions and in channel terminals. Rheol Acta 17:663-675
67. Pearson JRA (1966) Mechanical principles of polymer melt processing. Pergamon Press, Oxford, p 58
68. Pearson JRA (1994) Flow curves with a maximum. J Rheol 38(2):309-331
69. Pearson JRA, Petrie CJS (1968) On the melt flow instability of extruded polymers. In: Wetton RE, Whorlow RW (eds) Polymer systems deformation and flow. Macmillan, London, England, pp 163-187
70. Petrie CJS, Denn MM (1976) Instabilities in polymer processing. AIChE J 22:209-236
71. Piau JM, El Kissi N (1992) The influence of interface and volume properties of polymer melts on their die flow stability. Proc Xith Int Congr on Rheology, Brussels, Belgium. In: Moldenaers P, Keunings R (eds) Theoretical and Applied Rheology. Elsevier, Science Publishers, pp 70-74
72. Piau JM, El Kissi N (1994) Measurement and modeling of friction in polymer melts during macroscopic slip at the wall. J Non-Newt Fl Mech 54:121-142
73. Piau JM, El Kissi N, Tremblay B (1988) Low Reynolds number flow visualization of linear and branched silicones upstream of orifice dies. J Non-Newt Fl Mech 30:197-232
74. Piau JM, El Kissi N, Tremblay B (1990) Influence of upstream instabilities and wall slip on melt fracture and sharkskin phenomena during silicones extrusion through orifice dies. J Non-Newt Fl Mech 34:145-180
75. Piau JM, El Kissi N, Toussaint F, Mezghani A (1995) Distortions of polymer melt extrudates and their elimination using slippery surfaces. Rheol Acta 34:40-57
76. Ramamurthy AV (1986 a) Wall slip in viscous fluids and influence of materials of construction. J Rheol 30:337-357
77. Ramamurthy AV (1986b) LLDPE rheology and blown film fabrication. Adv in Polym Technol 6(4):489-499
78. Simhambhatla M, Leonov AI (1995) On the Theological modeling of viscoelastic polymer liquids with stable constitutive equations. Rheol Acta 34:259-273
79. Tordella JP (1956) Fracture in the extrusion of amorphous polymer through capillaries. J Appl Phys 27:454-458
80. Tordella JP (1957) Capillary flow of molten polyethylene - a photographic study of melt fracture. Trans Soc Rheol 1:203-212
81. Tordella JP (1958) An instability in the flow of molten polymers. Rheol Acta 1:216-221
82. Tordella JP (1963a) Unstable flow of molten polymers: a second site of melt fracture. J Appl Polym Sci 7:215-229
83. Tordella JP (1963b) An unusual mechanism of extrusion of polytetrafluoroethylene at high temperature and pressure. Trans Soc Rheol 7:231-239
84. Tordella JP (1967) US Patent 2791 806
85. Tordella JP (1969) Unstable flow of molten polymers. In: Eirich FR (ed) Rheology Vol V. Academic Press, New York, pp 57-92
86. Tremblay B (1991) Sharkskin defects of polymer melts: the role of cohesion and adhesion. J Rheol 35(6):985-998
87. Uhland E (1979) The anomalous flow behavior of HDPE. Rheol Acta 18:1-24
88. Van Krevelen DW (1990) Properties of polymers, correlations with chemical structure. Elsevier, NY
89. Vinogradov GV (1971) Flow and rubber elasticity of polymeric sytems. Pure and Appl Chem 26:423-449
90. Vinogradov GV (1974) Fundamental problems concerning the interrelation of the structue of polymers and their rheological properties in the fluid state. Pure and Appl Chem 39:115-149
91. Vinogradov GV (1975 a) Critical regimes of deformation of liquid polymeric systems. Rheol Acta 12:273-323
92. Vinogradov GV (1975b) Viscoelasticity of polymeric systems in fluid and rubbery states in uniaxial extension and shear. Pure and Appl Chem 42:527-549
93. Vinogradov GV (1975c) Viscoelastic and fracture phenomenon in uniaxial extension of high-molecular linear polymers. Rheol Acta 14:942-954
94. Vinogradov GV (1977) Ultimate regimes of deformation of linear flexible chain fluid polymers. Polymer 18:1275-1285
95. Vinogradov GV (1981) Limiting regimes of deformation of polymers. Polym Eng Sci 21:339-351
96. Vinogradov GV, Malkin AYa, Leonov AI (1963) Conditions of unstable flow of viscoelastic polymer systems. Kolloid Z 191:25-30
97. Vinogradov GV, Manin VN (1965) An experimental study of elastic turbulence. Koll Z 201:93-98
98. Vinogradov GV, Ivanova LI (1968) Wall slippage and elastic turbulence of polymers in the rubbery state. Rheol Acta 7:243-254
99. Vinogradov GV, Friedman ML, Yarlykov NV, Malkin AYa (1970) Unsteady flow of polymer melts: polypropylene. Rheol Acta 9:323-329
100. Vinogradov GV, Malkin AYa, Yanovski YG, Yarlykov NV, Berezhnaya GV (1972a) Viscoelastic properties and flow of narrow polybutadienes and polyisoprenes. J Polym Sci A2:1061-1084
101. Vinogradov GV, Insarova NI, Boiko BB, Borisenkova EK (1972a) Critical regimes of shear in linear polymers. Polym Eng Sci 12:323-334
102. Vinogradov GV, Malkin AYa, Blinova NK, Sergeyenkov SI, Zabugina MP, Titkova LV, Yanovsky YuG, Shalganova VG (1973) Peculiarities of flow and viscoelastic properties of solutions of polymers with a narrow molecular weight distribution. Europ Polymer J 9:1231-1249
103. Vinogradov GV, Isayev AI, Katsyutsevich EV (1978) Critical regimes of oscillatory deformation of polymeric systems above glass transition and melting temperatures. J Appl Polym Sci 22:727-749
104. Vinogradov GV, Yanovsky YuG, Titkova LV, Barancheyeva VV, Sergeyenkov I, Borisenkova EK (1980) Viscoelastic properties of linear polymers in the fluid state and their transition to the high-elastic state. Polym Eng Sci 20(17):1138-1146
105. Vinogradov GV, Protasov VP, Dreval VE (1984) The rheological behavior of flexible-chain polymers in the region of high shear rates and stresses, the critical process of spurting, and supercritical conditions of their movement at T
106. Wang S-Q, Drda PA, Inn Y-W (1996a) Exploring molecular origins of sharkskin, partial slip, and slope change in flow curves of linear low density polyethylene. J Rheol 40(5):875-898
107. Wang S-Q, Drda PA (1996b) Global and local stick-slip transitions are origins of spurt flow instability and sharkskin in capillary extrusion of polyethylene. In: Ait-Kadi A, Dealy JM, James DF, Williams MC (eds) Proc XII Int Congr on Rheology. August 18-23, 1996, Quebec City (Canada), pp 109-110
108. White JL (1973) Critique of flow pattern in polymer fluids at the entrance of a die and instabilities leading to extrudate distortion. Appl Polym Symp 20:155-174
109. Wu S (1982) Polymer interface and adhesion. Marcel Decker, New York
110. Yamane H, White JL (1987) A comparative study of flow instabilities in extrusion, melt spinning, and tubular blown film extrusion of Theologically characterized high density, low density and linear low density polyethylene melts. Nihon Reoloji Gakkaishi (Journal of the Society of Rheology, Japan) 15:131-140