Laser-assisted milling of silicon nitride ceramics and inconel 718

Journal of Manufacturing Science and Engineering

Volumn 130, Issue 3, 2008, Pages 0310131-0310139

  Tian, Yinggang ^a   Wu, Benxin ^a   Anderson, Mark ^a   Shin, Yung C ^a  

^a Purdue University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; ALUMINUM OXIDE; CARBIDE CUTTING TOOLS; CARBIDES; CERAMIC MATERIALS; HIGH TEMPERATURE OPERATIONS; MILLING (MACHINING); NITRIDES; SILICON CARBIDE; SILICON NITRIDE; SURFACE ROUGHNESS; THERMOGRAPHY (TEMPERATURE MEASUREMENT); TITANIUM COMPOUNDS;

ADVANCED MATERIALS; DIFFICULT TO MACHINE MATERIALS; INFRA-RED CAMERAS; LASER-ASSISTED MACHINING; LASER-ASSISTED MILLINGS; SILICON NITRIDE CERAMICS; SURFACE TEMPERATURE MEASUREMENT; THREE DIMENSIONAL THERMAL MODEL;

CUTTING TOOLS;

EID: 49749101501     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2927447     Document Type: Article

References (26)

1. König, W., and Zaboklicki, A. K., 1993, "Laser-Assisted Hot Machining of Ceramics and Composite Materials," International Conference on Machining of Advanced Materials, Gaithersburg, MD, NIST Special Publication, Vol. 847, pp. 455-463.
2. König, W., and Wagemann, A., 1993, "Machining of Ceramic Components: Process-Technological Potentials," Machining of Advanced Materials, NIST Special Publication, Vol. 847, pp. 3-16.
3. Rozzi, J. C., Krane, M. J. M., Incropera, F. P., and Shin, Y. C., 1995, "Numerical Prediction of Three-Dimensional Unsteady Temperatures in a Rotating Cylindrical Workpiece Subjected to Localized Heating by a Translating Laser Source," 1995 ASME International Mechanical Engineering Conference and Exposition, San Francisco, CA, HTD Vol. 317-2, pp. 399-411.
4. Shin, Y. C., Lei., S., Pfefferkorn, F. E., Rebro, P., and Rozzi, J. C., 2000, "Laser-Assisted Machining: Its Potential and Future," Mach. Technol., 11(3), pp. 1-6.
5. Rozzi, J. C., Pfefferkorn, F. E., Shin, Y. C., and Incropera, F. P., 2000, "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," ASME J. Manuf. Sci. Eng., 122(4), pp. 666-670.
6. Lei, S., Shin, Y. C., and Incropera, F., 2001, "Experimental Investigation of Thermo-Mechanical Characteristics in Laser-Assisted Machining of Silicon Nitride Ceramics," ASME J. Manuf. Sci. Eng., 123, pp. 639-616.
7. Jau, B. M., Copley, S. M., and Bass, M., 1980, "Laser Assisted Machining," SME Technical Paper MR80-846.
8. Rajagopal, S., Plankenhorn, D. J., and Hill, V. L., 1982, "Machining Aerospace Alloys With the Aid of a 15 kw Laser," Journal of Applied Metalworking, 2(3), pp. 170-184.
9. Bass, M., Beck, D., and Copley, S. M., 1978, "Laser Assisted Machining," Fourth European Electro-Optics Conference, Utrecht, Netherlands, pp. 233-240.
10. Anderson, M., Patwa, R., and Shin, Y. C., 2006, "Laser-Assisted Machining of Inconel 718 With an Economic Analysis," Int. J. Mach. Tools Manuf., 46, pp. 1879-1891.
11. Anderson, M., and Shin, Y.C., 2006, "Laser-Assisted Machining of P550 With an Economic Analysis," Proc. Inst. Mech. Eng., Part B, 220(12), pp. 2055-2067.
12. Klocke, F., and Bergs, T., 1997, "Laser-Assisted Turning of Advanced Ceramics," Proc. SPIE, 3102, pp. 120-130.
13. Rebro, P., Shin, Y. C., and Incropera, F. P., 2002, "Laser Assisted Machining of Reaction Sintered Mullite Ceramics," ASME J. Manuf. Sci. Eng., 124, pp. 875-885.
14. Pfefferkorn, F. E., Shin, Y. C., Tian, Y., and Incropera, F. P., 2004, "Laser-Assisted Machining of Magnesia-Partially Stabilized Zirconia," ASME J. Manuf. Sci. Eng., 126, pp. 42-51.
15. Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P., and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: I-Comparison of Predictions With Measured Surface Temperature Histories," Int. J. Heat Mass Transfer, 43, pp. 1409-1424.
16. Rozzi, J. C., Incropera, F. P., and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: II-Assessment of Parametric Effects," Int. J. Heat Mass Transfer, 43, pp. 1425-1437.
17. Pfefferkorn, F. E., Incropera, F. P., and Shin, Y. C., 2005, "Heat Transfer Model of Semi-Transparent Ceramics Undergoing Laser-Assisted Machining," Int. J. Heat Mass Transfer, 48(10), pp. 1999-2012.
18. Tian, Y., and Shin, Y. C., 2006, "Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics with Complex Features," ASME J. Manuf. Sci. Eng., 128, pp. 425-434.
19. Skvarenina, S., and Shin, Y. C., 2006, "Laser-Assisted Machining of Compacted Graphite Iron With Microstructural Analysis," Int. J. Mach. Tools Manuf., 46, pp. 7-17.
20. Jeon, Y., and Pfefferkorn, F. E., 2008, "Effect of Laser Preheating the Workpiece on Micro-End Milling of Metals," ASME J. Manuf. Sci. Eng., 130, pp. 011004.
21. Shen, X., Liu, W. J., and Lei, S., 2005, "Three-Dimensional Thermal Analysis for Laser Assisted Milling of Silicon Nitride Ceramics Using FEA," Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition, Nov. 5-11, Orlando, FL, Vol. 16(1), pp. 445-452.
22. 4," TPRL Report No. 2128.
23. Patankar, S. V. 1980, Numerical Heat Transfer and Fluid Flow, Hemisphere, New York.
24. 1972, Thermophysical Properties of Matter, Y. S. Touioukian and D. P. DeWitt eds., IFI/Plenum, New York, Vol. 8.
25. 1988, Theory and Practice of Radiation Thermometry, D. P. Dewiti, and G. D. Nutter, eds., Wiley. New York, pp. 174.
26. Leshock, C. E., Kim, J. N., and Shin, Y. C. 2001, "Plasma Enhanced Machining of Inconel 718: Modeling of Workpiece Temperature With Plasma Heating and Experimenlal Results," Int. J. Mach. Tools Manuf., 41, pp. 877-897.