Effect of laser preheating the workpiece on micro end milling of metals

Journal of Manufacturing Science and Engineering

Volumn 130, Issue 1, 2008, Pages 0110041-0110049

  Jeon, Yongho ^a   Pfefferkorn, Frank ^a  

^a University of Wisconsin Madison   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; ALUMINUM COATED STEEL; CARBIDES; HARDNESS; MICROMACHINING; MILLING (MACHINING); PREHEATING; PRODUCTIVITY; STIFFNESS; YIELD STRESS;

CUTTING FORCES; FLEXURAL STIFFNESS; HEAT TRANSFER MODEL; MATERIAL REMOVAL; MICRO END MILLING; SPECIFIC CUTTING ENERGY; SURFACE FINISHES; WORKPIECE MATERIALS;

STRENGTH OF MATERIALS;

EID: 46649093970     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2783219     Document Type: Article

References (53)

1. Anon, 2001, "MEMS Industry Group Annual Report," Pittsburgh.
2. Bao, W. Y., and Tansel, I., 2000, "Modeling Micro-End-Milling Operations. Part II: Tool Run-Out," Int. J. Mach. Tools Manuf., 40, pp, 2175-2192.
3. Bao, W. Y., and Tansel, I., 2000, "Modeling Micro-End-Milling Operations. Part I: Analytical Cutting Force Model," Int. J. Mach. Tools Manuf., 40, pp. 2155-2173.
4. Bao, W. Y., and Tansel, I., 2000, "Modeling Micro-End-Milling Operations. Part III: Influence of Tool Wear," Int. J. Mach. Tools Manuf., 40, pp. 2193-2211.
5. Damazo, B. N., Davies, M. A., Dutterer, B., and Kennedy, M. D., 1999, "A Summary of Micro-Milling Studies," in 1st International Conference and General Meeting of the European Society for Precision Engineering and Nanotechnology, McKeown, P. E. A., ed., Bremen, Germany, 1, pp. 322-325.
6. Kim, C.-J., Bono, M., and Ni, J., 2002, "Experimental Analysis of Chip Formation in Micro-Milling," Technical Paper, Society of Manufacturing Engineers, MR, MR02-159.
7. Lee, K., and Dornfeld, D. A., 2002, "An Experimental Study on Burr Formation in Micro Milling Aluminum and Copper," in North American Manufacturing Research Institution of the Society of Manufacturing Engineers, West Lafayette, IN.
8. Rahman, M., Kumar, A., and Prakash, J., 2001, "Micro Milling of Pure Copper," J. Mater. Process. Technol., 116, pp, 39-43.
9. Prakash, J. R. S., Rahman, M., Senthil, K. A., and Lim, S. C., 2002, "Model for Predicting Tool Life in Micro Milling of Copper," Chin. J. Mech. Eng., 15(supplement), pp. 115-120.
10. Tansel, I., Trujillo, M., Nedbouyan, A., Velez, C., Bao, W. Y., Arkan, T., and Tansel, B., 1988, "Micro End Milling II. Extending Tool Life With a Smart Workpiece Holder (SWH)," Int. J. Mach. Tools Manuf., 38, pp, 1437-1448.
11. Tansel, I., Trujillo, M., Nedbouyan, A., Velez, C., Bao, W. Y., Arkan, T., and Tansel, B., 1998, "Micro End Milling I. Wear and Breakage," Int. J. Mach. Tools Manuf., 38, pp, 1419-1436.
12. Tansel, I., Trujillo, M., Nedbouyan, A., Velez, C., Bao, W. Y., Arkan, T., and Tansel, B., 1998, "Micro End Milling III. Wear Estimation and Tool Breakage Detection Using Acoustic Emission Signals," Int. J. Mach. Tools Manuf., 38, pp, 1449-1466.
13. Kim, C.-J., Mayor, J., and Ni, J., 2004, "A Static Model of Chip Formation in Microscale Milling," ASME J. Manuf. Sci. Eng., 126(4), pp. 710-718.
14. Beltrami, I., Joseph, C., Clavel, R., Bacher, J.-P., and Bottinelli, S. 2004, "Micro- and Nanoelectric-Discharge Machining," J. Mater. Process. Technol., 149, pp, 263-265.
15. Lim, H. S., Wong, Y. S., Raham, M., and Lee, E. M. K., 2003, "A Study on the Machining of High-Aspect Ratio Micro-Structures Using Micro EDM," J. Mater. Process. Technol., 140, pp, 318-325.
16. Muttamara, A., Fukuzawa, Y., Mohri, N., and Tani, T., 2003, "Probability of Precision Micro-Machining of Insulating Si3N4 Ceramics by EDM," J, Mater. Process. Technol., 140, pp, 243-247.
17. Schuster, R., Kirchner, V., Allongue, P., and Ertl, G., 2000, "Electrochemical Micromachining," Science, 289(5476), pp, 98-101.
18. Trueman, C. S., and Huddleston, J., 2000, "Material Removal by Spalling During EDM of Ceramics," J. Eur. Ceram. Soc., 20, pp, 1629-1635.
19. Yan, M.-T., Haung, C.-W., Fang, C.-C., and Chang, C.-X., 2004, "Development of Prototype Micro-EDM Machine," J. Mater. Process. Technol., 149, pp, 99-105.
20. Friedrich, C., Coane, P., Goettert, J., and Gopinathin, N., 1998, "Direct Fabrication of Deep X-Ray Lithography Masks by Micromechanical Milling," Precis. Eng., 22, pp, 164-173.
21. Pham, D. T., Dimov, S. S., Bigot, S., Ivanov, A., and Popov, K., 2004, "Micro-EDM-Recent Developments and Research Issues," J. Mater. Process. Technol., 149, pp, 50-57.
22. Rajurkar, K. P., 1990, "Technology and Research in Electrodischarge and Electrochemical Machining," ASME Production Engineering Division (Publication) PED, 43, pp, 309-336.
23. Rajurkar, K. P., McGeough, J. A., Kozak, J., and De Silva, A., 1999, "New Developments in Electrochemical Machining," CIRP Ann., 48(2), pp. 596-579.
24. Carter, P. W., 2001, "Advances in Rapid Prototyping and Rapid Manufacturing," Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Conference (EIC/EMCW Exposition 2001) Cincinnati, pp. 107-114.
25. Chua, C. K., Leong, K. F., and Lim, C. S., 2003, Rapid Prototyping-Principals and Applications, 2nd ed., World Scientific, Singapore.
26. Frazier, A. B., 1995, "The Miniaturization Technologies: Past, Present, and Future," IEEE Trans. Ind. Electron., 42(5), pp, 423-430.
27. Jacobs, P. F., 1996, Stereolithography and Other RP&M Technologies: From Rapid Prototyping to Rapid Tooling, ASME Press, New York.
28. Bruck, R., Hahn, K., and Stienecker, J., 1995, "Technology Description Methods for LIGA Processes," J. Micromech. Microeng., 5(2), pp, 196-198.
29. Ehrfeld, W., Abraham, M., Ehrfeld, U., Lacher, M., and Lehr, H., 1994, "Materials for LIGA Products," Proceedings IEEE Micro Electro Mechanical Systems: An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems, Oiso, Japan, IEEE, New York, pp. 86-90.
30. Hruby, J., 2002, "Overview of LIGA Microfabrication," High Energy Density and High Power RF. 5th Workshop, Snowbird, UT, pp. 55-61.
31. McCormick, M., Chowanietz, E., and Lees, A., 1994, "Microengineering Design and Manufacture Using the LIGA Process," Eng. Sci. Educ. J., 3(6), pp, 255-262.
32. Ruprecht, R., Kalb, H., Kowanz, B., and Bacher, W., 1996, "Molding of LIGA Microstructures From Fluorinated Polymers," Microsyst. Technol., 2(4), pp, 182-185.
33. Takacs, M., and Vero, B., 2003, "Material Structural Aspects of Micro-Scale Chip Removal," Mater. Sci. Forum, 414-415, pp. 337-342.
34. Schaller, T., Bohn, L., Mayer, J., and Schubert, K., 1999, "Microstructure Grooves With a Width of Less Than 50 μm Cut With Ground Hard Metal Micro End Mills," Precis. Eng., 23, pp, 229-235.
35. Vogler, M. P., Liu, X., Kapoor, S. G., DeVor, R. E., and Ehmann, K. F., 2002, "Development of Meso-Scale Machine Tool (mMT) Systems," SME Technical Paper No. MS02-181.
36. Isomura, K., Murayama, M., Yamaguchi, H., Ijichi, N., Asakura, H., Saji, N., Shiga, O., Takahashi, K., Tanaka, S., Genda, T., and Esashi, M., 2002, "Development of Microturbocharger and Microcombustor for a Three-Dimensional Gas Turbine at Microscale," ASME Turbo Expo, Amsterdam, Vol. 1, pp, 1127-1134.
37. Vogler, M. P., DeVor, R. E., and Kapoor, S. G., 2003, "Microstructure-Level Force Prediction Model for Micro-Milling of Multi-Phase Materials," ASME J. Manuf. Sci. Eng., 125(2), pp, 202-209.
38. Bass, M., Beck, D., and Copley, S. M., 1978, "Laser Assisted Machining," Fourth European Electro-Optics Conference, Utrecht, Netherlands, pp. 233-240.
39. Jau, B. M., Copley, S. M., and Bass, M., 1981, "Laser Assisted Machining," Ninth North American Manufacturing Research Conference, University Park, PA, pp. 12-15.
40. Rajagopal, S., Plankenhorn, D. J., and Hill, V. L., 1982, "Machining Aerospace Alloys With the Aid of a 15 kW Laser," J. Appl. Metalwork., 2(3), pp, 170-184.
41. König, W., and Wageman, A., 1990, "Fine Machining of Advanced Ceramics," Proc. of 7th International Meeting on Modern Ceramics Technologies, P. Vincenzini, ed., Montecatini, Italy, Elsevier, Amsterdam, Vol. D, pp, 2769-2783.
42. König, W., and Zaboklicki, A. K., 1993, "Laser-Assisted Hot Machining of Ceramics and Composite Materials," International Conference on Machining of Advanced Materials, Jahanmir, S., ed., NIST, Gaithersburg, NIST Special Publication No. 847, pp, 455-463.
43. Rozzi, J. C., Pfefferkorn, F. E., Shin, Y. C., and Incropera, F. P., 2000, "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," ASME J. Manuf. Sci, Eng., 122, pp, 666-670.
44. Lei, S., Shin, Y. C., and Incropera, F. P., 2001, "Experimental Investigation of Thermo-Mechanical Characteristics in Laser-Assisted Machining of Silicon Nitride Ceramics," ASME J. Manuf. Sci. Eng., 123, pp, 639-646.
45. Rebro, P. A., Shin, Y. C., and Incropera, F. P., 2002, "Laser-Assisted Machining of Reaction Sintered Mullite Ceramics," ASME J. Manuf. Sci. Eng., 124, pp, 875-885.
46. Pfefferkorn, F. E., Shin, Y. C., Incropera, F. P., and Tian, Y., 2004, "Laser-Assisted Machining of Magnesia-Partially-Stabilized Zirconia," ASME J. Manuf. Sci. Eng., 126(1), pp, 42-51.
47. Novak, J. W., Shin, Y. C., and Incropera, F. P., 1997, "Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718," ASME J. Manuf. Sci. Eng., 119(1), pp, 125-129.
48. Shin, Y. C., and Kim, J. N., 1996, "Plasma Enhanced Machining of Inconel 718," ASME International Mechanical Engineering Congress and Exposition, Atlanta, Vol. MED-4, pp, 243-249.
49. Singh, R., and Melkote, S. N., 2005, "Experimental Characterization of Laser-Assisted Mechanical Micromachining (LAMM) Process," 2005 ASME International Mechanical Engineering Congress and Exposition, IMECE 2005, Orlando, Vol. 16-2, pp, 957-964.
50. Anon, 1991, ASM Handbook, ASM, Metals Park, OH, Vol. 4.
51. Groot, H., and Larsen, R., 2006, "Thermophysical Properties of Pelikan Plaka Paint," Thermophysical Properties Research Lab (TPRL).
52. Incropera, F. P., and DeWitt, D. P., 2001, Fundamentals of Heat and Mass Transfer, 5 ed., Wiley, New York.
53. Yuan, Z. J., Zhou, M., and Dong, S., 1996, "Effect of Diamond Tool Sharpness on Minimum Cutting Thickness and Cutting Surface Integrity in Ultraprecision Machining," J. Mater. Process. Technol., 62, pp, 327-330.