Numerical simulation of hot-pressed veneer products: Moulding, spring-back and distortion

Wood Material Science and Engineering

Volumn 2, Issue 3-4, 2007, Pages 130-137

  Ormarsson, Sigurdur ^a   Sandberg, Dick ^b  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b LINNAEUS UNIVERSITY   (Sweden)

Author keywords

Birch; Fibre orientation; Finite element method; Furniture; Manufacturing; Mechanosorption; Thermohydromechanical behaviour; Twist

Indexed keywords

EID: 49549088576     PISSN: 17480272     EISSN: 17480280     Source Type: Journal    
DOI: 10.1080/17480270801945355     Document Type: Article

References (30)

1. Berglind, H. & Dillenz, A. (2003). Detection of glue deficiency in laminated wood with pulse thermography. Journal of Wood Science, 49, 216-220.
2. Blanchet, P., Cloutier, A., Gendron, G. & Beauregard, R. (2003). Hygro-mechanical modelling of layered parquet using the finite element method. In L. Salmén (Ed.), Proceedings of the Second International Conference of the European Society for Wood Mechanics. Stockholm: STFI.
3. Blanchet, P., Cloutier, A., Gendron, G. & Beauregard, R. (2005). Numerical prediction of engineered wood flooring behavior. Wood and Fiber Science, 37, 484-496.
4. Blanchet, P., Cloutier, A., Gendron, G. & Beauregard, R. (2006). Engineered wood flooring design using the finite element method. Forest Products Journal, 56(5), 59-65.
5. Cassens, D., Leng, Y. & McCabe, G. (2003). Face check development in veneered furniture panels. Forest Products Journal, 53(10), 79-86.
6. Esping, B. & Salin, J.-G. (2005). Drying and re-conditioning on pre-twist board. In V Tarvainen (Ed.,), Measures for improving quality and shape stability of sawn softwood timber during drying and under service conditions. VTT Publications 584.
7. Guan, N., Thunell, B. & Lyth, K. (1983). On the friction between steel and some common Swedish species. Holz als Roh- und Werkstoff, 41, 55-60.
8. Hvattum, O., Lind, P. & Osvik, H. (1978). Springback of laminated bends (Tech. Rep. No. 16). Blindern: Norsk Treteknisk Institut.
9. Kollmann, F. & Coté, W A., Jr (1968). Principles of wood science and technology. Part I. Solid wood. Berlin: Springer.
10. Lind, P. (1981). Corner joints and laminated bends - Movements caused by moisture changes (Tech. Rep. No. 26). Blindem: Norsk Treteknisk Institut.
11. McKenzie, W M. (1967). Friction in wood cutting. Forest Products Journal, 17(11), 38-43.
12. Matuana, L. M., Balatinecz, J. J. & Park, C. B. (1998). Evaluation of adhesion between PVC and surface-treated wood veneer laminates. Polymer Engineering and Science, 38, 765-773.
13. Navi, P. & Heger, F. (2005). Comportement thermo- hydroméchanique du bois. Applications technologiques et dans les structures. Lausanne: Presses polytechniques et universitaires romand.
14. Ohya, S., Kitayama, S. & Kawaguchi, M. (1989). The effect of veneer quality on the bending strength of laminated wood. Journal of the Japan Wood Research Society, 35, 905-911.
15. Ormarsson, S. (1999). Numerical analysis of moisture-related distortion in sawn timber. Doctoral thesis, Publ. 99: 7, Department of Structural Mechanics, Chalmers University of Technology, Göteborg, Sweden.
16. Ormarsson, S., Dahlblom, O. & Petersson, H. (1998). A numerical study of the shape stability of sawn timber subjected to moisture variation, Part 1: Theory. Wood Science and Technology, 32, 325-334.
17. Ormarsson, S., Petersson, H. & Dahlblom, O. (2002). Finite element simulations of moisture transport and moisture related warping in wooden products. In Proceedings of the Fifth World Congress on Computational Mechanics, Vienna, Austria, 7-12 July.
18. Ranta-Maunus, A. (1990). Impact of mechano-sorption creep to the long-term strength of timber. Holz als Roh- und Werkstoff, 48, 67-71.
19. Salin, J.-G. (1992). Numerical prediction of checking during timber drying and a new mechano-sorptive creep model. Holz als Roh- und Werkstoff, 50, 195-200.
20. Sandberg, D. (1998a). The influence of isostatic compression on the cellwall structure of wood (Tech. Rep. No. TRITA-TRÅ R-98-35). KTH-Royal Institute of Technology, Wood Technology and Processing.
21. Sandberg, D. (1998b). Value activation with vertical annual rings - Material, production, products (Tech. Rep. No. TRITA-TRÅ R-98-36). KTH-Royal Institute of Technology, Wood Technology and Processing.
22. Sandberg, D. & Blomqvist, L. (2007). The importance of material and production parameters for the shape stability of laminated veneer products (Tech. Rep. No. 41). School of Technology and Design, Växjö University. (In Swedish with English abstract.)
23. Stevens, W. C. & Turner, N. (1948). Solid and laminated wood bending. London: His Majesty's Stationery Office.
24. Stevens, W. C. & Turner, N. (1970). Wood bending handbook. Woburn, MA: Woodcraft Supply Corporation.
25. Suchsland, O. (2004). The swelling and shrinkage of wood. A practical technology primer. Madison, WI: Forest Products Society.
26. Suchsland, O. & McNatt, J. D. (1986). Computer simulation of laminated wood panel warping. Forest Products Journal, 36(11-12), 16-23.
27. US Forest Products Laboratory (1974). Wood handbook: Wood as an engineering material. Agricultural Handbook No. 72. US Department of Agriculture.
28. Wagenführ, A., Buchelt, B. & Pfriem, A. (2006). Material behaviour of veneer during multidimensional moulding. Holz als Roh- und Werkstoff, 64, 83-89.
29. Wu, Z. H., Furuno, T. & Zhang, B. Y. (1999). Calculation models of pressure and position of curved laminated veneer lumber in molds during pressing. Journal of Wood Science, 45, 213-220.
30. Zemiar, J. & Choma, P. (2002). The shape stability of formed laminated wood. Wood Research (Drevarsky Vyskum), 47(2), 35-43.